Smart-Clip 2

A way to uninstall Smart-Clip 2 from your PC

This page contains detailed information on how to remove Smart-Clip 2 for Windows. It was coded for Windows by SMART-~1|Smart-Clip 2. More information about SMART-~1|Smart-Clip 2 can be seen here. Further information about Smart-Clip 2 can be seen at Smart-Clip 2. The program is usually located in the C:\Program Files (x86)\GsmServer\Smart-Clip 2 folder. Take into account that this location can differ depending on the user's preference. The full command line for removing Smart-Clip 2 is MsiExec.exe /I{E2081571-7F16-49BD-BCB8-C1CDCB80CE8F}. Keep in mind that if you will type this command in Start / Run Note you may get a notification for administrator rights. The application's main executable file is titled SmartClip2.exe and occupies 11.71 MB (12279296 bytes).

The executable files below are installed beside Smart-Clip 2. They occupy about 13.61 MB (14272424 bytes) on disk.

• pcnsl.exe (542.59 KB)
• SmartClip2.exe (11.71 MB)
• setup.exe (1.13 MB)
• SCPwrSet.exe (125.00 KB)

This page is about Smart-Clip 2 version 1.34.04 alone. Click on the links below for other Smart-Clip 2 versions:

• 1.25.07
• 1.38.05
• 1.36.00
• 1.29.15
• 1.46.00
• 1.12.02
• 1.40.05
• 1.39.08
• 1.10.05
• 1.27.02
• 1.17.01
• 1.39.00
• 1.29.04
• 1.12.05
• 1.29.19
• 1.34.03
• 1.26.05
• 1.22.00
• 1.25.02
• 1.40.11
• 1.29.13
• 1.11.04
• 1.16.00
• 1.15.02
• 1.10.00
• 1.26.03
• 1.14.03
• 1.29.06
• 1.42.03
• 1.12.07
• 1.22.01
• 1.40.09
• 1.41.03
• 1.17.10
• 1.41.00
• 1.26.04
• 1.12.06
• 1.44.00
• 1.42.00
• 1.02.03
• 1.14.02
• 1.34.07
• 1.30.04
• 1.41.05
• 1.28.07
• 1.41.06
• 1.14.01
• 1.35.01
• 1.10.04
• 1.43.00
• 1.15.08
• 1.26.11
• 1.36.01
• 1.33.04
• 1.30.03
• 1.13.02
• 1.39.04
• 1.19.00
• 1.40.10
• 1.45.01
• 1.09.01
• 1.45.04
• 1.33.07
• 1.29.05
• 1.38.06
• 1.25.06
• 1.10.02
• 1.21.02
• 1.34.06
• 1.23.03
• 1.17.05
• 1.40.08
• 1.21.01
• 1.42.04
• 1.29.17
• 1.32.00
• 1.23.04
• 1.34.01
• 1.32.01
• 1.27.14
• 1.10.03
• 1.45.03
• 1.39.02
• 1.38.02
• 1.07.00
• 1.12.00
• 1.33.05
• 1.39.07
• 1.12.03
• 1.40.06
• 1.15.01
• 1.46.01
• 1.38.04
• 1.33.06
• 1.26.08
• 1.24.03
• 1.19.04
• 1.15.03
• 1.12.01
• 1.34.09

...click to view all...
After the uninstall process, the application leaves some files behind on the computer. Part_A few of these are listed below.

Directories that were found:

• C:\Program Files (x86)\GsmServer\Smart-Clip 2

The files below were left behind on your disk when you remove Smart-Clip 2:

• C:\Program Files (x86)\GsmServer\Smart-Clip 2\brom.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\cyvywuwi.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\cyvywuwi.x86
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\DataLibrary.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0404.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0407.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0409.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x040a.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x040c.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0410.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0411.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0412.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0804.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1028.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1031.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1033.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1034.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1036.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1040.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1041.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1042.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\2052.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\Alcor Micro Smart Card Reader Driver.msi
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\CommonAppData\SZCCID\SZCCID.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\ISSetup.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\AlcGener.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SCPwrSet.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\szccid.cat
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SzCcid.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SZCCID.INF
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SZCCID.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\unsetup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\AlcGener.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SCPwrSet.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\szccid.cat
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SzCcid.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SZCCID.INF
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SZCCID.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\unsetup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\setup.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\Setup.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\setup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\EULA.rtf
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FilterBinTrans.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashToolLib.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashToolLib.v1.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashtoollibEx.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FrameCommModule.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FWModule.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\IMEI.rtf
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Chinese.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Hungarian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Italian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Polish.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Portuguese.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Russian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Spanish.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Ukrainian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\meta_dll.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\pcnsl.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.dm
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.gsm
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.url
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SysUtility.dll
• C:\Windows\Installer\{B029A58F-3563-4C5F-AE2F-4ACF70AA117D}\ARPPRODUCTICON.exe

Registry keys:

• HKEY_CURRENT_USER\Software\GsmServer\Smart-Clip 2
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\1751802E61F7DB94CB8B1CDCBC08ECF8

Open regedit.exe in order to delete the following values:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\1751802E61F7DB94CB8B1CDCBC08ECF8\ProductName

How to remove Smart-Clip 2 from your PC with the help of Advanced Uninstaller PRO

Smart-Clip 2 is a program marketed by the software company SMART-~1|Smart-Clip 2. Some computer users want to erase this application. Sometimes this can be difficult because performing this manually takes some knowledge regarding PCs. One of the best EASY approach to erase Smart-Clip 2 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is good because Advanced Uninstaller PRO is the best uninstaller and all around utility to take care of your Windows system.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take some time to admire the program's interface and wealth of functions available. Advanced Uninstaller PRO is a powerful system utility.

3. Click on the General Tools category


4. Activate the Uninstall Programs tool


5. All the programs existing on the computer will be shown to you

6. Navigate the list of programs until you find Smart-Clip 2 or simply activate the Search field and type in "Smart-Clip 2". If it is installed on your PC the Smart-Clip 2 program will be found automatically. Notice that after you click Smart-Clip 2 in the list of apps, some data regarding the program is made available to you:

• Star rating (in the left lower corner). This explains the opinion other users have regarding Smart-Clip 2, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details regarding the program you want to uninstall, by pressing the Properties button.

For example you can see that for Smart-Clip 2:

• The web site of the program is: Smart-Clip 2
• The uninstall string is: MsiExec.exe /I{E2081571-7F16-49BD-BCB8-C1CDCB80CE8F}

7. Press the Uninstall button. A window asking you to confirm will show up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall Smart-Clip 2.


8. After uninstalling Smart-Clip 2, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of Smart-Clip 2 which have been left behind will be found and you will be asked if you want to delete them. By removing Smart-Clip 2 with Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your system.

Your Windows system will remain clean, speedy and able to run without errors or problems.

Disclaimer

The text above is not a recommendation to uninstall Smart-Clip 2 by SMART-~1|Smart-Clip 2 from your PC, nor are we saying that Smart-Clip 2 by SMART-~1|Smart-Clip 2 is not a good application for your PC. This text only contains detailed instructions on how to uninstall Smart-Clip 2 in case you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.