Smart-Clip 2

A way to uninstall Smart-Clip 2 from your system

Smart-Clip 2 is a software application. This page holds details on how to uninstall it from your PC. It was created for Windows by SMART-~1|Smart-Clip 2. More information about SMART-~1|Smart-Clip 2 can be seen here. Further information about Smart-Clip 2 can be found at Smart-Clip 2. Smart-Clip 2 is commonly installed in the C:\Program Files (x86)\GsmServer\Smart-Clip 2 directory, subject to the user's decision. The full command line for removing Smart-Clip 2 is MsiExec.exe /I{A9B1AC01-8516-4AFA-BEF8-53DBABA02E1E}. Keep in mind that if you will type this command in Start / Run Note you might get a notification for admin rights. SmartClip2.exe is the programs's main file and it takes approximately 12.75 MB (13364736 bytes) on disk.

The executable files below are installed together with Smart-Clip 2. They occupy about 14.64 MB (15350528 bytes) on disk.

• pcnsl.exe (535.42 KB)
• SmartClip2.exe (12.75 MB)
• setup.exe (1.13 MB)
• SCPwrSet.exe (125.00 KB)

The current page applies to Smart-Clip 2 version 1.42.03 only. For more Smart-Clip 2 versions please click below:

• 1.25.07
• 1.38.05
• 1.36.00
• 1.29.15
• 1.46.00
• 1.12.02
• 1.40.05
• 1.39.08
• 1.10.05
• 1.27.02
• 1.17.01
• 1.39.00
• 1.29.04
• 1.12.05
• 1.29.19
• 1.34.03
• 1.26.05
• 1.22.00
• 1.25.02
• 1.40.11
• 1.29.13
• 1.11.04
• 1.16.00
• 1.15.02
• 1.10.00
• 1.26.03
• 1.14.03
• 1.29.06
• 1.12.07
• 1.22.01
• 1.40.09
• 1.41.03
• 1.17.10
• 1.41.00
• 1.26.04
• 1.12.06
• 1.44.00
• 1.42.00
• 1.02.03
• 1.14.02
• 1.34.07
• 1.30.04
• 1.41.05
• 1.28.07
• 1.41.06
• 1.14.01
• 1.35.01
• 1.10.04
• 1.43.00
• 1.15.08
• 1.26.11
• 1.36.01
• 1.33.04
• 1.30.03
• 1.13.02
• 1.39.04
• 1.19.00
• 1.40.10
• 1.34.04
• 1.45.01
• 1.09.01
• 1.45.04
• 1.33.07
• 1.29.05
• 1.38.06
• 1.25.06
• 1.10.02
• 1.21.02
• 1.34.06
• 1.23.03
• 1.17.05
• 1.40.08
• 1.21.01
• 1.42.04
• 1.29.17
• 1.32.00
• 1.23.04
• 1.34.01
• 1.32.01
• 1.27.14
• 1.10.03
• 1.45.03
• 1.39.02
• 1.38.02
• 1.07.00
• 1.12.00
• 1.33.05
• 1.39.07
• 1.12.03
• 1.40.06
• 1.15.01
• 1.46.01
• 1.38.04
• 1.33.06
• 1.26.08
• 1.24.03
• 1.19.04
• 1.15.03
• 1.12.01
• 1.34.09

...click to view all...
Some files and registry entries are usually left behind when you uninstall Smart-Clip 2.

Directories left on disk:

• C:\Program Files (x86)\GsmServer\Smart-Clip 2

The files below remain on your disk when you remove Smart-Clip 2:

• C:\Program Files (x86)\GsmServer\Smart-Clip 2\brom.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\cyvywuwi.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\cyvywuwi.x86
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\DataLibrary.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0404.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0407.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0409.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x040a.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x040c.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0410.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0411.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0412.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\0x0804.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1028.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1031.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1033.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1034.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1036.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1040.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1041.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\1042.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\2052.mst
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\Alcor Micro Smart Card Reader Driver.msi
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\CommonAppData\SZCCID\SZCCID.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\ISSetup.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\AlcGener.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SCPwrSet.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\szccid.cat
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SzCcid.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SZCCID.INF
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\SZCCID.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x32\unsetup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\AlcGener.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SCPwrSet.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\szccid.cat
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SzCcid.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SZCCID.INF
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\SZCCID.sys
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\program_files\AlcorMicro\x64\unsetup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\setup.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\Setup.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\drivers\AU9540DrvPkg V1.7.26.0_WHQL\setup.iss
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\EULA.rtf
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FilterBinTrans.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashToolLib.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashToolLib.v1.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FlashtoollibEx.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FrameCommModule.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\FWModule.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\IMEI.rtf
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Chinese.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Hungarian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Italian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Polish.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Portuguese.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Russian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Spanish.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\languages\Ukrainian.ini
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\libusb0.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\libusb-1.0.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\meta_dll.dll
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\pcnsl.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.dm
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.exe
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.gsm
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SmartClip2.url
• C:\Program Files (x86)\GsmServer\Smart-Clip 2\SysUtility.dll
• C:\Users\%user%\AppData\Roaming\Microsoft\Windows\Recent\Smart-Clip 2.lnk
• C:\Windows\Installer\{645ED1DA-C9D4-4B6D-ACC0-1D2648691908}\ARPPRODUCTICON.exe

Use regedit.exe to manually remove from the Windows Registry the keys below:

• HKEY_CURRENT_USER\Software\GsmServer\Smart-Clip 2
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\10CA1B9A6158AFA4EB8F35BDBA0AE2E1

Additional registry values that are not removed:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\10CA1B9A6158AFA4EB8F35BDBA0AE2E1\ProductName

How to uninstall Smart-Clip 2 with the help of Advanced Uninstaller PRO

Smart-Clip 2 is a program marketed by the software company SMART-~1|Smart-Clip 2. Frequently, users want to uninstall this program. Sometimes this is easier said than done because doing this by hand requires some knowledge related to Windows internal functioning. The best SIMPLE way to uninstall Smart-Clip 2 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and all around tool to maximize the performance of your Windows PC.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's design and number of functions available. Advanced Uninstaller PRO is a very useful package of utilities.

3. Press the General Tools button


4. Click on the Uninstall Programs button


5. A list of the programs installed on the PC will be shown to you

6. Navigate the list of programs until you locate Smart-Clip 2 or simply activate the Search field and type in "Smart-Clip 2". The Smart-Clip 2 program will be found automatically. Notice that when you select Smart-Clip 2 in the list , some information regarding the program is shown to you:

• Safety rating (in the lower left corner). The star rating explains the opinion other users have regarding Smart-Clip 2, from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Details regarding the program you wish to uninstall, by pressing the Properties button.

For instance you can see that for Smart-Clip 2:

• The software company is: Smart-Clip 2
• The uninstall string is: MsiExec.exe /I{A9B1AC01-8516-4AFA-BEF8-53DBABA02E1E}

7. Press the Uninstall button. A window asking you to confirm will show up. accept the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall Smart-Clip 2.


8. After uninstalling Smart-Clip 2, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to start the cleanup. All the items that belong Smart-Clip 2 that have been left behind will be detected and you will be asked if you want to delete them. By removing Smart-Clip 2 with Advanced Uninstaller PRO, you can be sure that no registry items, files or directories are left behind on your PC.

Your computer will remain clean, speedy and able to take on new tasks.

Disclaimer

This page is not a piece of advice to uninstall Smart-Clip 2 by SMART-~1|Smart-Clip 2 from your PC, we are not saying that Smart-Clip 2 by SMART-~1|Smart-Clip 2 is not a good software application. This text only contains detailed info on how to uninstall Smart-Clip 2 supposing you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.