IAR Embedded Workbench for ARM

A way to uninstall IAR Embedded Workbench for ARM from your computer

IAR Embedded Workbench for ARM is a Windows application. Read below about how to uninstall it from your computer. The Windows version was created by IAR Systems. Go over here for more information on IAR Systems. More details about IAR Embedded Workbench for ARM can be seen at http://www.iar.com. The application is usually placed in the C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4 directory. Take into account that this location can vary depending on the user's decision. The full command line for uninstalling IAR Embedded Workbench for ARM is C:\Program Files (x86)\InstallShield Installation Information\{06873393-7E44-4CEB-8C15-BD5C8D447D78}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you might be prompted for admin rights. IarIdePm.exe is the IAR Embedded Workbench for ARM's main executable file and it takes around 855.50 KB (876032 bytes) on disk.

The following executables are incorporated in IAR Embedded Workbench for ARM. They take 122.54 MB (128494332 bytes) on disk.

• het470.exe (208.00 KB)
• iarchive.exe (1.58 MB)
• iasmarm.exe (2.50 MB)
• iccarm.exe (26.07 MB)
• ielfdumparm.exe (2.70 MB)
• ielftool.exe (332.00 KB)
• ilinkarm.exe (5.06 MB)
• iobjmanip.exe (1.01 MB)
• isymexport.exe (954.00 KB)
• jlink.exe (157.92 KB)
• JLinkConfig.exe (161.92 KB)
• JLinkSTM32.exe (57.92 KB)
• JLinkSTR91x.exe (69.92 KB)
• JLinkTCPIPServer.exe (101.92 KB)
• EmuDiag.exe (201.50 KB)
• EmuDiag.exe (184.06 KB)
• RDIConfig.exe (44.00 KB)
• SVDConv.exe (314.00 KB)
• dpinst.exe (900.38 KB)
• dpinst.exe (1.00 MB)
• InstDrivers.exe (49.92 KB)
• DPInst.exe (825.91 KB)
• DPInst.exe (508.91 KB)
• ocd_cmdr.exe (8.56 MB)
• ocd_cmdr_64bit.exe (7.38 MB)
• Drivers10_install.exe (3.88 MB)
• ST-Link_V2_USBdriver.exe (11.42 MB)
• ti_emupack_setup.exe (31.67 MB)
• hidTest.exe (36.00 KB)
• AT91SAM_doc.exe (1.73 MB)
• image_convert.exe (2.48 MB)
• hex2bin.exe (8.50 KB)
• HIDClient.exe (208.00 KB)
• WebConverter.exe (32.00 KB)
• fzmparser.exe (66.68 KB)
• test.exe (40.00 KB)
• hex2bin.exe (8.00 KB)
• makefsdata.exe (196.09 KB)
• echotool.exe (29.00 KB)
• Tftpd32-3.51-setup.exe (544.32 KB)
• aes_gen_key.exe (19.50 KB)
• bdc-comm.exe (499.00 KB)
• converter.exe (12.50 KB)
• dfuwrap.exe (15.50 KB)
• eflash.exe (17.00 KB)
• finder.exe (244.50 KB)
• ftrasterize.exe (537.00 KB)
• logger.exe (586.00 KB)
• makefsfile.exe (42.50 KB)
• mkstringtable.exe (14.50 KB)
• pnmtoc.exe (13.50 KB)
• sflash.exe (11.50 KB)
• embOSView.exe (156.00 KB)
• CSpyBat.exe (2.34 MB)
• CSpyServer.exe (2.98 MB)
• IarBuild.exe (125.00 KB)
• IarIdePm.exe (855.50 KB)
• SourceIndexer.exe (23.00 KB)

...click to view all...

The current page applies to IAR Embedded Workbench for ARM version 6.40.2 alone. You can find below a few links to other IAR Embedded Workbench for ARM versions:

• 6.21.4
• 7.60.2
• 6.50.3
• 6.40.1
• 9.40.2
• 8.20.2
• 6.60.1
• 6.20.1
• 6.70.3
• 8.22.2
• 8.22.1
• 6.30.7
• 7.30.1
• 6.10.5
• 8.40.2
• 8.30.2
• 9.50.2
• 7.40.3
• 7.70.2
• 9.32.2
• 7.50.1
• 7.20.1
• 8.11.2
• 8.32.4
• 6.10.2
• 9.10.2
• 6.30.1
• 9.50.1
• 8.42.1
• 6.50.5
• 8.40.1
• 6.40.5
• 8.32.2
• 6.50.2
• 9.32.1
• 7.70.1
• 7.20.2
• 7.50.3
• 9.20.1
• 7.40.7
• 7.40.2
• 6.70.1
• 7.60.1
• 8.50.1
• 6.21.1
• 7.10.1
• 7.40.5
• 6.70.2
• 6.50.6
• 8.11.1
• 7.50.2
• 8.10.1
• 9.40.1
• 7.80.4
• 6.40.4
• 7.80.3
• 8.50.9
• 6.50.1
• 6.30.3
• 8.32.1
• 7.80.1
• 6.20.3
• 6.30.6
• 8.32.3
• 6.40.3
• 7.10.3
• 8.11.3
• 7.80.2
• 8.30.1
• 7.30.4
• 9.20.4
• 8.20.1
• 8.50.6
• 7.20.5
• 8.50.5
• 7.40.1
• 6.60.2
• 7.30.3
• 6.30.4
• 9.20.2
• 8.42.2
• 9.30.1
• 6.10.1
• 9.10.1

...click to view all...
If you're planning to uninstall IAR Embedded Workbench for ARM you should check if the following data is left behind on your PC.

Folders left behind when you uninstall IAR Embedded Workbench for ARM:

• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4

Check for and delete the following files from your disk when you uninstall IAR Embedded Workbench for ARM:

• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armangel.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armangel.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armangel.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armbat.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armbat.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armbat.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armgdbserv.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armgdbserv.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armgdbserv.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjet.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjet.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjet.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjlink.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjlink.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjlink.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjtag.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjtag.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armjtag.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armLibSupport.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armLibSupport.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armLibSupport.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armlmiftdi.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armlmiftdi.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armlmiftdi.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armpemicro.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armproc.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armproc.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armproc.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrdi.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrdi.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrdi.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrom.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrom.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armrom.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armsim2.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armsim2.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armsim2.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armstlink.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armstlink.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armstlink.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armXDS100.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armXDS100.ENU.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\armXDS100.JPN.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\cwtdarm.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\cwtdarmlib.dll
• C:\PROGRAM FILES (X86)\IAR SYSTEMS\EMBEDDED WORKBENCH 6.4\arm\bin\het470.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\iarchive.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\iasmarm.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\iccarm.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\ielfdumparm.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\ielftool.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\ilinkarm.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\iobjmanip.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\isymexport.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\CUSB.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\EARM.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\JTAGProgrammer.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\JtagTestDLL.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigA2D.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigAPI.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigChan.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigCmdInterpreter.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigETMDecoder.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigFlashID.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigJtag.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigSWO.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigTestGUI.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigTManager.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigTraceJETM.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigXDCR.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\SigXTrace.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\TraceMDI.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\TraceWin.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\UConnect.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\UJETMControl.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\USBEEPROM.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\bin\USigJtag.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\EmuDiag.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\emudiag.pdf
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jet\ReadMe.txt
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jlink.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkARM.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkARM_Backup00.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkARM_Backup01.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkConfig.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkSTM32.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkSTR91x.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JLinkTCPIPServer.exe
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtag_usb.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\JTAG_USB2.dll
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM_DSP_ARM.cfg
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM1136J-S.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM1156T2-S.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM1176JZ-S.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM11MPCORE.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM710T.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM720T.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM740T.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM920T.def
• C:\Program Files (x86)\IAR Systems\Embedded Workbench 6.4\arm\bin\jtagjet\ARM922T.def

Usually the following registry keys will not be uninstalled:

• HKEY_LOCAL_MACHINE\Software\IAR Systems\IAR Embedded Workbench for ARM
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{F29C236D-E2A5-4584-96A7-CBF09BE79050}

Use regedit.exe to delete the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~2\IARSYS~1\EMBEDD~1.4\common\bin\IarIdePm.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~2\IARSYS~1\EMBEDD~1.4\common\bin\IarIdePm.exe.FriendlyAppName

How to remove IAR Embedded Workbench for ARM from your computer with the help of Advanced Uninstaller PRO

IAR Embedded Workbench for ARM is an application released by the software company IAR Systems. Some users decide to remove this program. Sometimes this is troublesome because uninstalling this by hand requires some experience regarding Windows program uninstallation. One of the best SIMPLE procedure to remove IAR Embedded Workbench for ARM is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, install it. This is good because Advanced Uninstaller PRO is the best uninstaller and general tool to clean your computer.

DOWNLOAD NOW

• visit Download Link
• download the program by pressing the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's design and number of tools available. Advanced Uninstaller PRO is a very useful PC management program.

3. Press the General Tools button


4. Activate the Uninstall Programs button


5. All the programs existing on the computer will appear

6. Navigate the list of programs until you locate IAR Embedded Workbench for ARM or simply activate the Search field and type in "IAR Embedded Workbench for ARM". If it is installed on your PC the IAR Embedded Workbench for ARM application will be found very quickly. When you click IAR Embedded Workbench for ARM in the list of applications, the following data regarding the application is available to you:

• Safety rating (in the left lower corner). The star rating explains the opinion other users have regarding IAR Embedded Workbench for ARM, from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information regarding the program you are about to uninstall, by pressing the Properties button.

For example you can see that for IAR Embedded Workbench for ARM:

• The publisher is: http://www.iar.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{06873393-7E44-4CEB-8C15-BD5C8D447D78}\setup.exe

7. Press the Uninstall button. A confirmation window will come up. accept the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will uninstall IAR Embedded Workbench for ARM.


8. After uninstalling IAR Embedded Workbench for ARM, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to start the cleanup. All the items that belong IAR Embedded Workbench for ARM that have been left behind will be found and you will be able to delete them. By uninstalling IAR Embedded Workbench for ARM using Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your computer.

Your system will remain clean, speedy and able to take on new tasks.

Geographical user distribution

Disclaimer

The text above is not a recommendation to remove IAR Embedded Workbench for ARM by IAR Systems from your PC, nor are we saying that IAR Embedded Workbench for ARM by IAR Systems is not a good application for your computer. This text simply contains detailed instructions on how to remove IAR Embedded Workbench for ARM in case you decide this is what you want to do. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.