IAR Embedded Workbench for ARM

How to uninstall IAR Embedded Workbench for ARM from your computer

You can find on this page detailed information on how to remove IAR Embedded Workbench for ARM for Windows. The Windows release was created by IAR Systems. You can read more on IAR Systems or check for application updates here. Further information about IAR Embedded Workbench for ARM can be found at http://www.iar.com. The application is frequently found in the C:\Program Files\IAR Systems\Embedded Workbench 6.0 directory (same installation drive as Windows). The full command line for removing IAR Embedded Workbench for ARM is C:\Program Files\InstallShield Installation Information\{F0205D4B-57DA-43AA-B491-DEB3C2ADC176}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you may get a notification for administrator rights. The application's main executable file is called IarIdePm.exe and its approximative size is 851.50 KB (871936 bytes).

IAR Embedded Workbench for ARM is composed of the following executables which take 120.39 MB (126234946 bytes) on disk:

• het470.exe (208.00 KB)
• iarchive.exe (1.58 MB)
• iasmarm.exe (2.47 MB)
• iccarm.exe (25.94 MB)
• ielfdumparm.exe (2.68 MB)
• ielftool.exe (325.50 KB)
• ilinkarm.exe (4.87 MB)
• iobjmanip.exe (1.01 MB)
• isymexport.exe (954.00 KB)
• jlink.exe (157.89 KB)
• JLinkConfig.exe (161.89 KB)
• JLinkSTM32.exe (57.89 KB)
• JLinkSTR91x.exe (69.89 KB)
• JLinkTCPIPServer.exe (97.89 KB)
• EmuDiag.exe (184.06 KB)
• RDIConfig.exe (44.00 KB)
• InstDrivers.exe (49.89 KB)
• DPInst.exe (825.91 KB)
• DPInst.exe (508.91 KB)
• ocd_cmdr.exe (8.56 MB)
• ocd_cmdr_64bit.exe (7.38 MB)
• drivers_osjtag_multilink_cyclone_install.exe (5.28 MB)
• ST-Link_V2_USBdriver.exe (11.42 MB)
• ti_emupack_setup.exe (34.34 MB)
• hidTest.exe (36.00 KB)
• AT91SAM_doc.exe (1.73 MB)
• hex2bin.exe (8.50 KB)
• HIDClient.exe (208.00 KB)
• WebConverter.exe (32.00 KB)
• fzmparser.exe (66.68 KB)
• test.exe (40.00 KB)
• hex2bin.exe (8.00 KB)
• makefsdata.exe (196.09 KB)
• aes_gen_key.exe (19.50 KB)
• bdc-comm.exe (499.00 KB)
• converter.exe (12.50 KB)
• dfuwrap.exe (15.50 KB)
• eflash.exe (17.00 KB)
• finder.exe (244.50 KB)
• ftrasterize.exe (537.00 KB)
• logger.exe (586.00 KB)
• makefsfile.exe (42.50 KB)
• mkstringtable.exe (14.50 KB)
• pnmtoc.exe (13.50 KB)
• sflash.exe (11.50 KB)
• embOSView.exe (144.00 KB)
• CSpyBat.exe (2.34 MB)
• CSpyServer.exe (2.80 MB)
• IarBuild.exe (125.00 KB)
• IarIdePm.exe (851.50 KB)

...click to view all...

The information on this page is only about version 6.30.6 of IAR Embedded Workbench for ARM. You can find here a few links to other IAR Embedded Workbench for ARM releases:

• 6.21.4
• 7.60.2
• 6.50.3
• 6.40.1
• 9.40.2
• 8.20.2
• 6.60.1
• 6.20.1
• 6.70.3
• 8.22.2
• 8.22.1
• 6.30.7
• 7.30.1
• 6.10.5
• 8.40.2
• 8.30.2
• 9.50.2
• 7.40.3
• 7.70.2
• 9.32.2
• 7.50.1
• 7.20.1
• 8.11.2
• 8.32.4
• 6.10.2
• 9.10.2
• 6.30.1
• 9.50.1
• 8.42.1
• 6.50.5
• 8.40.1
• 6.40.5
• 8.32.2
• 6.50.2
• 9.32.1
• 7.70.1
• 7.20.2
• 7.50.3
• 6.40.2
• 9.20.1
• 7.40.7
• 7.40.2
• 6.70.1
• 7.60.1
• 8.50.1
• 6.21.1
• 7.10.1
• 7.40.5
• 6.70.2
• 6.50.6
• 8.11.1
• 7.50.2
• 8.10.1
• 9.40.1
• 7.80.4
• 6.40.4
• 7.80.3
• 8.50.9
• 6.50.1
• 6.30.3
• 8.32.1
• 7.80.1
• 6.20.3
• 8.32.3
• 6.40.3
• 7.10.3
• 8.11.3
• 7.80.2
• 8.30.1
• 7.30.4
• 9.20.4
• 8.20.1
• 8.50.6
• 7.20.5
• 8.50.5
• 7.40.1
• 6.60.2
• 7.30.3
• 6.30.4
• 9.20.2
• 8.42.2
• 9.30.1
• 6.10.1
• 9.10.1

...click to view all...
After the uninstall process, the application leaves some files behind on the computer. Part_A few of these are listed below.

Directories left on disk:

• C:\Program Files (x86)\Common Files\IAR Systems\Licenses\Embedded Workbench\ARM
• C:\Users\%user%\AppData\Roaming\IAR Embedded Workbench\ARM

Files remaining:

• C:\Program Files (x86)\Common Files\IAR Systems\Licenses\Embedded Workbench\ARM\01\keys.dat
• C:\Program Files (x86)\Common Files\IAR Systems\Licenses\Embedded Workbench\ARM\01\License.ini

Registry keys:

• HKEY_LOCAL_MACHINE\Software\IAR Systems\IAR Embedded Workbench for ARM
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{C6941AF5-D246-4695-83EE-C3F442771A65}

A way to delete IAR Embedded Workbench for ARM from your PC with Advanced Uninstaller PRO

IAR Embedded Workbench for ARM is a program offered by the software company IAR Systems. Frequently, people decide to uninstall this program. Sometimes this is hard because performing this manually requires some advanced knowledge related to PCs. The best EASY practice to uninstall IAR Embedded Workbench for ARM is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and general tool to take care of your Windows system.

DOWNLOAD NOW

• navigate to Download Link
• download the program by clicking on the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take your time to admire the program's interface and wealth of features available. Advanced Uninstaller PRO is a very good Windows tool.

3. Click on the General Tools button


4. Activate the Uninstall Programs button


5. A list of the programs existing on the PC will be made available to you

6. Navigate the list of programs until you locate IAR Embedded Workbench for ARM or simply activate the Search feature and type in "IAR Embedded Workbench for ARM". If it exists on your system the IAR Embedded Workbench for ARM app will be found very quickly. After you click IAR Embedded Workbench for ARM in the list , some information about the program is made available to you:

• Safety rating (in the lower left corner). This explains the opinion other people have about IAR Embedded Workbench for ARM, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Click on the Read reviews button.
• Details about the app you want to remove, by clicking on the Properties button.

For example you can see that for IAR Embedded Workbench for ARM:

• The web site of the program is: http://www.iar.com
• The uninstall string is: C:\Program Files\InstallShield Installation Information\{F0205D4B-57DA-43AA-B491-DEB3C2ADC176}\setup.exe

7. Click the Uninstall button. A confirmation window will come up. Confirm the removal by pressing Uninstall. Advanced Uninstaller PRO will uninstall IAR Embedded Workbench for ARM.


8. After removing IAR Embedded Workbench for ARM, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to proceed with the cleanup. All the items of IAR Embedded Workbench for ARM which have been left behind will be found and you will be asked if you want to delete them. By uninstalling IAR Embedded Workbench for ARM using Advanced Uninstaller PRO, you are assured that no registry entries, files or folders are left behind on your PC.

Your computer will remain clean, speedy and able to take on new tasks.

Disclaimer

This page is not a piece of advice to uninstall IAR Embedded Workbench for ARM by IAR Systems from your computer, nor are we saying that IAR Embedded Workbench for ARM by IAR Systems is not a good application for your computer. This text simply contains detailed info on how to uninstall IAR Embedded Workbench for ARM in case you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.