GT Designer3 (GOT1000)

A guide to uninstall GT Designer3 (GOT1000) from your computer

This page contains complete information on how to uninstall GT Designer3 (GOT1000) for Windows. It was developed for Windows by MITSUBISHI ELECTRIC CORPORATION. More info about MITSUBISHI ELECTRIC CORPORATION can be read here. More information about GT Designer3 (GOT1000) can be seen at http://www.mitsubishielectric.com/fa/. The program is usually found in the C:\Program Files (x86)\MELSOFT directory. Keep in mind that this path can vary being determined by the user's choice. The full command line for uninstalling GT Designer3 (GOT1000) is RunDll32. Keep in mind that if you will type this command in Start / Run Note you may get a notification for administrator rights. GTD3_Startup.exe is the GT Designer3 (GOT1000)'s primary executable file and it takes about 317.50 KB (325120 bytes) on disk.

The executable files below are part of GT Designer3 (GOT1000). They occupy about 303.83 MB (318584546 bytes) on disk.

• emahelp.exe (655.00 KB)
• eManualViewer.exe (758.00 KB)
• mlcgwf64.exe (1.58 MB)
• mvdatsrv.exe (1.60 MB)
• mvdbconv.exe (1.03 MB)
• mvdbsrv.exe (1.08 MB)
• mvdlfile.exe (754.00 KB)
• mvdlfsrv.exe (1.24 MB)
• mviefile.exe (1.21 MB)
• mvprtsrv.exe (1.37 MB)
• mvreader.exe (3.39 MB)
• mvserver.exe (1.30 MB)
• mvupdate.exe (767.00 KB)
• gacutil.exe (80.00 KB)
• ECMonitoringLogger.exe (56.00 KB)
• ECMonitoringLoggerW.exe (64.00 KB)
• ECProjectDataBase3.exe (457.00 KB)
• VLINKS.exe (108.00 KB)
• DPinst64.exe (1.00 MB)
• ESIniCommTimeoutSet.exe (204.00 KB)
• ESInitCommPingCountSet.exe (12.00 KB)
• ESInitMonitorRetryCountSet.exe (12.00 KB)
• GD2.exe (492.00 KB)
• GD2IntelliToolsSCPrtcl.exe (592.00 KB)
• GX Works2 FastBoot.exe (172.00 KB)
• GX Works2 Progress.exe (80.00 KB)
• GX Works2 Service.exe (60.00 KB)
• GX Works2 Startup.exe (92.00 KB)
• MELHLP.exe (232.00 KB)
• IOSystem.exe (816.00 KB)
• SimManager.exe (76.00 KB)
• FXSimRun2.exe (296.00 KB)
• QnSimRun2.exe (1.04 MB)
• QnUDSimRun2.exe (1.05 MB)
• QnXSimRun2.exe (1.16 MB)
• QuteSimRun.exe (960.00 KB)
• GT10USBDriver_Uninst.exe (643.52 KB)
• BkupRstrDataConv.exe (51.50 KB)
• ColInfo.exe (545.00 KB)
• GTD2MES.exe (1.08 MB)
• GTD3.exe (13.28 MB)
• GTD3Progress.exe (400.50 KB)
• A900.exe (2.51 MB)
• GSS3.exe (337.00 KB)
• GT1000.exe (2.64 MB)
• GT1100.exe (6.60 MB)
• GT1200.exe (6.78 MB)
• GT1400.exe (7.12 MB)
• GT1500.exe (6.81 MB)
• GT1600.exe (7.04 MB)
• SDEB.exe (2.55 MB)
• SDEB_gt10.exe (9.22 MB)
• SDEB_GT11.exe (9.39 MB)
• SDEB_GT12.exe (9.90 MB)
• SDEB_gt14.exe (9.84 MB)
• SDEB_GT15.exe (9.57 MB)
• SDEB_GT16.exe (10.02 MB)
• gssb2j.exe (59.50 KB)
• gssbrs.exe (60.50 KB)
• GSS3_Startup.exe (305.00 KB)
• GTD3_Startup.exe (317.50 KB)
• GTD3_2000.exe (18.47 MB)
• GTDCsppTool.exe (432.00 KB)
• GTD2MES.exe (1.12 MB)
• GS2100.exe (9.57 MB)
• GSS3.exe (338.00 KB)
• GT2100.exe (9.57 MB)
• GT2300.exe (15.42 MB)
• GT2500.exe (15.53 MB)
• GT2700.exe (15.50 MB)
• SDEB.exe (290.50 KB)
• SDEB_GT21.exe (290.00 KB)
• gssb2j.exe (58.50 KB)
• gssbrs.exe (59.50 KB)
• GTD2MES.exe (1.07 MB)
• BthTase.exe (1.62 MB)
• GTD2MES.exe (1.05 MB)
• setup.exe (794.76 KB)
• TransInfo.exe (35.57 KB)
• MMSserve.exe (2.04 MB)
• ProfileManagement.exe (153.50 KB)
• GX Works2 Progress.exe (76.00 KB)
• PMConfig.exe (213.00 KB)
• PMConfigv2.exe (222.00 KB)
• PMInst.exe (121.00 KB)
• PMCS2 Progress.exe (61.00 KB)
• PMCS2Manager.exe (549.50 KB)
• FX5SSCSimRun.exe (175.00 KB)
• RD77GFSimRun.exe (79.00 KB)
• RD77MSSimRun.exe (72.00 KB)
• MT2OSC2 Progress.exe (175.00 KB)
• OSC2.exe (3.20 MB)
• SGT2000.exe (16.97 MB)
• SGT2000Main.exe (333.50 KB)
• SGT2000_MultiCH.exe (16.97 MB)
• SGTCMMND2.exe (559.00 KB)
• SGTEdgecrossLink.exe (31.50 KB)
• SGTLicenseAccept.exe (633.00 KB)
• SgtOaImpCmd.exe (73.00 KB)
• SGTProgress.exe (406.00 KB)
• SGTPXFunc.exe (640.00 KB)
• SGTPXFunc_MultiCH.exe (640.00 KB)
• IPaddress.exe (23.50 KB)
• sgtb2j.exe (58.50 KB)
• sgtbrs.exe (59.50 KB)
• SPI_710.exe (8.06 MB)
• SPI_761.exe (7.99 MB)
• SPI_768.exe (8.58 MB)

...click to view all...

The current page applies to GT Designer3 (GOT1000) version 1.220 only. Click on the links below for other GT Designer3 (GOT1000) versions:

• 1.210
• 1.275
• 1.130
• 1.285
• 1.123
• 1.197
• 1.255
• 1.131
• 1.295
• 1.270
• 1.134
• 1.215
• 1.185
• 1.175
• 1.195
• 1.265
• 1.126
• 1.119
• 1.156
• 1.124
• 1.236
• 1.155
• 1.150
• 1.200
• 1.190
• 1.245
• 1.127
• 1.230
• 1.109
• 1.170
• 1.260
• 1.235
• 1.19
• 1.01
• 1.144
• 1.58
• 1.17
• 1.165
• 1.180
• 1.137
• 1.128
• 1.310
• 1.145
• 1.151
• 1.178
• 1.152
• 1.106
• 1.117
• 1.225
• 1.112
• 1.00.0000
• 1.181
• 1.104
• 1.280
• 1.40
• 1.290
• 1.113
• 1.205
• 1.108
• 1.118
• 1.54
• 1.160
• 1.103
• 1.136

...click to view all...
Some files and registry entries are frequently left behind when you remove GT Designer3 (GOT1000).

Folders remaining:

• C:\Program Files (x86)\MELSOFT

Files remaining:

• C:\Program Files (x86)\MELSOFT\appico_GTW3.ico
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_CABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_DABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_EventManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMaker.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMakerInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_SatelliteSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_StatusManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZPlatform.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Common.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData2.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigatorThrough.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Device.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DeviceAccessor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Diagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Monitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_MonitorStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_NetworkAnalyzer.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_OnLineUnitChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcClock.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFile.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFunction.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcLabelData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryArrangement.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryClear.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryFormat.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcRemote.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_PlcDiagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_SystemMonitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\GFPRDevice.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\CTREESTD.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Ado.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGenerator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGeneratorAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CommonProjectData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompilerAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompressEncoder.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheckInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceComment.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceInit.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceMemory.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConv.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConvIF.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_IParamData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryParser.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OtherCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PackwinObject.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChangeInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_936.dll

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{08A028CB-C02D-4EB6-A8D6-A3A340A0CBA7}

Additional values that you should remove:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\e-Manual Viewer\mvreader.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\e-Manual Viewer\mvreader.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.EXE.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.EXE.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GX Simulator2\Common\SimManager.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GX Simulator2\Common\SimManager.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW3\GXW3.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW3\GXW3.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\GX Works2 Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MELSOFT Mediative Server\ImagePath

A way to remove GT Designer3 (GOT1000) from your computer with the help of Advanced Uninstaller PRO

GT Designer3 (GOT1000) is an application released by MITSUBISHI ELECTRIC CORPORATION. Frequently, users try to erase it. This is troublesome because deleting this manually takes some know-how regarding Windows internal functioning. One of the best QUICK solution to erase GT Designer3 (GOT1000) is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, install it. This is good because Advanced Uninstaller PRO is the best uninstaller and general tool to take care of your Windows PC.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with the program's design and wealth of features available. Advanced Uninstaller PRO is a very good package of utilities.

3. Press the General Tools category


4. Click on the Uninstall Programs tool


5. All the applications installed on the computer will appear

6. Navigate the list of applications until you find GT Designer3 (GOT1000) or simply click the Search feature and type in "GT Designer3 (GOT1000)". The GT Designer3 (GOT1000) application will be found very quickly. Notice that when you click GT Designer3 (GOT1000) in the list of apps, the following data about the application is available to you:

• Star rating (in the lower left corner). This explains the opinion other users have about GT Designer3 (GOT1000), from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information about the application you are about to uninstall, by pressing the Properties button.

For example you can see that for GT Designer3 (GOT1000):

• The web site of the program is: http://www.mitsubishielectric.com/fa/
• The uninstall string is: RunDll32

7. Click the Uninstall button. A window asking you to confirm will appear. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will uninstall GT Designer3 (GOT1000).


8. After removing GT Designer3 (GOT1000), Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to start the cleanup. All the items that belong GT Designer3 (GOT1000) which have been left behind will be found and you will be asked if you want to delete them. By removing GT Designer3 (GOT1000) using Advanced Uninstaller PRO, you can be sure that no registry items, files or folders are left behind on your PC.

Your computer will remain clean, speedy and ready to run without errors or problems.

Disclaimer

The text above is not a recommendation to remove GT Designer3 (GOT1000) by MITSUBISHI ELECTRIC CORPORATION from your PC, nor are we saying that GT Designer3 (GOT1000) by MITSUBISHI ELECTRIC CORPORATION is not a good application for your computer. This page simply contains detailed info on how to remove GT Designer3 (GOT1000) in case you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.