GT Designer3 (GOT1000)

How to uninstall GT Designer3 (GOT1000) from your computer

GT Designer3 (GOT1000) is a Windows program. Read below about how to remove it from your PC. It is developed by MITSUBISHI ELECTRIC CORPORATION. Go over here where you can get more info on MITSUBISHI ELECTRIC CORPORATION. Click on http://www.mitsubishielectric.com/fa/ to get more information about GT Designer3 (GOT1000) on MITSUBISHI ELECTRIC CORPORATION's website. The program is often found in the C:\Program Files (x86)\MELSOFT directory (same installation drive as Windows). The full command line for removing GT Designer3 (GOT1000) is RunDll32. Note that if you will type this command in Start / Run Note you might receive a notification for administrator rights. GTD3_Startup.exe is the GT Designer3 (GOT1000)'s primary executable file and it takes circa 319.00 KB (326656 bytes) on disk.

GT Designer3 (GOT1000) contains of the executables below. They occupy 261.78 MB (274492671 bytes) on disk.

• CommentConv.exe (58.50 KB)
• DataTransfer.exe (432.00 KB)
• DtComm.exe (36.00 KB)
• DtComm2000.exe (39.00 KB)
• excommgt.exe (28.00 KB)
• rcconv.exe (44.00 KB)
• rcconv2000.exe (34.00 KB)
• ResourceConverter.exe (52.00 KB)
• ResourceConverter2000.exe (46.50 KB)
• DocumentConverter.exe (340.00 KB)
• gacutil.exe (80.00 KB)
• ECMonitoringLogger.exe (56.00 KB)
• ECMonitoringLoggerW.exe (62.50 KB)
• VLINKS.exe (108.00 KB)
• ESIniCommTimeoutSet.exe (204.00 KB)
• ESInitCommPingCountSet.exe (23.50 KB)
• Gppw.exe (1.81 MB)
• GD2.exe (452.00 KB)
• GD2IntelliToolsSCPrtcl.exe (532.00 KB)
• GX Works2 FastBoot.exe (172.00 KB)
• GX Works2 Progress.exe (80.00 KB)
• GX Works2 Service.exe (60.00 KB)
• GX Works2 Startup.exe (92.00 KB)
• MELHLP.exe (228.00 KB)
• IOSystem.exe (816.00 KB)
• SimManager.exe (76.00 KB)
• FXSimRun2.exe (296.00 KB)
• QnSimRun2.exe (1.19 MB)
• QuteSimRun.exe (1.09 MB)
• gtcnv2.exe (2.85 MB)
• BkupRstrDataConv.exe (51.50 KB)
• ColInfo.exe (538.50 KB)
• GTD2MES.exe (968.00 KB)
• GTD3.exe (13.14 MB)
• GTD3Progress.exe (400.50 KB)
• A900.exe (2.52 MB)
• GSS3.exe (339.00 KB)
• GT1000.exe (2.66 MB)
• GT1100.exe (6.61 MB)
• GT1200.exe (6.79 MB)
• GT1400.exe (7.13 MB)
• GT1500.exe (6.82 MB)
• GT1600.exe (7.05 MB)
• SDEB.exe (2.55 MB)
• SDEB_gt10.exe (9.09 MB)
• SDEB_GT11.exe (9.38 MB)
• SDEB_GT12.exe (9.89 MB)
• SDEB_gt14.exe (9.71 MB)
• SDEB_GT15.exe (9.57 MB)
• SDEB_GT16.exe (9.90 MB)
• gssb2j.exe (58.50 KB)
• gssbrs.exe (59.50 KB)
• GSS3_Startup.exe (305.00 KB)
• GTD3_Startup.exe (319.00 KB)
• GTD3_2000.exe (15.05 MB)
• GTD2MES.exe (960.00 KB)
• GS2100.exe (7.05 MB)
• GSS3.exe (339.00 KB)
• GT2100.exe (7.05 MB)
• GT2300.exe (9.01 MB)
• GT2500.exe (9.04 MB)
• GT2700.exe (9.09 MB)
• SDEB.exe (246.50 KB)
• SDEB_GT21.exe (246.50 KB)
• gssb2j.exe (54.50 KB)
• gssbrs.exe (56.00 KB)
• GTD2MES.exe (912.00 KB)
• GS Installer.exe (2.20 MB)
• GTD2MES.exe (900.00 KB)
• MMSserve.exe (2.04 MB)
• ProfileManagement.exe (69.50 KB)
• gacutil.exe (100.50 KB)
• GX Works2 Progress.exe (80.00 KB)
• PMConfig.exe (172.00 KB)
• PMInst.exe (92.00 KB)
• MT2OSC2 Progress.exe (180.00 KB)
• OSC2.exe (2.43 MB)
• SGT1000.exe (7.66 MB)
• SGTCMMND.exe (467.50 KB)
• IPaddress.exe (23.50 KB)
• sgtb2j.exe (58.50 KB)
• sgtbrs.exe (59.50 KB)
• SPI_710.exe (8.06 MB)
• SPI_761.exe (7.99 MB)
• SPI_766.exe (8.02 MB)
• SGT2000.exe (9.44 MB)
• SGTCMMND2.exe (504.00 KB)
• IPaddress.exe (23.50 KB)
• sgtb2j.exe (54.50 KB)
• sgtbrs.exe (55.50 KB)

...click to view all...

This web page is about GT Designer3 (GOT1000) version 1.130 alone. Click on the links below for other GT Designer3 (GOT1000) versions:

• 1.210
• 1.275
• 1.285
• 1.123
• 1.197
• 1.255
• 1.131
• 1.295
• 1.270
• 1.134
• 1.215
• 1.185
• 1.175
• 1.195
• 1.265
• 1.126
• 1.119
• 1.156
• 1.124
• 1.236
• 1.155
• 1.150
• 1.200
• 1.190
• 1.245
• 1.127
• 1.230
• 1.109
• 1.170
• 1.260
• 1.235
• 1.19
• 1.01
• 1.144
• 1.58
• 1.17
• 1.220
• 1.165
• 1.180
• 1.137
• 1.128
• 1.310
• 1.145
• 1.151
• 1.178
• 1.152
• 1.106
• 1.117
• 1.225
• 1.112
• 1.00.0000
• 1.181
• 1.104
• 1.280
• 1.40
• 1.290
• 1.113
• 1.205
• 1.108
• 1.118
• 1.54
• 1.160
• 1.103
• 1.136

...click to view all...
Quite a few files, folders and registry data will not be uninstalled when you remove GT Designer3 (GOT1000) from your PC.

Directories left on disk:

• C:\Program Files (x86)\MELSOFT

The files below remain on your disk by GT Designer3 (GOT1000) when you uninstall it:

• C:\Program Files (x86)\MELSOFT\appico_GTW3.ico
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_CABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_DABSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_EventManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMaker.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_LogMakerInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_SatelliteSupport.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZAppABS_StatusManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\ApplicationAbsorber\DZPlatform.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Common.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_CommonDeviceData2.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DataNavigatorThrough.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Device.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_DeviceAccessor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Diagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Monitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_MonitorStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_NetworkAnalyzer.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_OnLineUnitChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcClock.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFile.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcFunction.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcLabelData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryArrangement.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryClear.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcMemoryFormat.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcRemote.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_Operation_PlcStatus.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_PlcDiagnose.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\DZCommABS_SystemMonitor.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\CommunicationAbsorber\GFPRDevice.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\CTREESTD.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Ado.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGenerator.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CodeGeneratorAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CommonProjectData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Compiler_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompilerAdapter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CompressEncoder.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Converter_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_CrossReferenceData_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataCheckInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DataManager_IEC.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceComment.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceInit.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_DeviceMemory.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConv.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_GIDProjConvIF.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_Inside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_IParamData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_LibraryParser.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_MSFParameterOperation_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OnlineChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_OtherCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PackwinObject.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterCheck.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_ParameterData.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_936.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_949.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChange_RC_950.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCTypeChangeInside.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_1252.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_932.dll
• C:\Program Files (x86)\MELSOFT\DNaviZero\DataAbsorber\DZDataABS_PLCUpLoadDownLoad_RC_936.dll

Registry keys:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|MELSOFT|RT ToolBox3|2DVision|en|MELFA_2DVS.resources.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|MELSOFT|RT ToolBox3|2DVision|ja|MELFA_2DVS.resources.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|MELSOFT|RT ToolBox3|2DVision|sma-NO|MELFA_2DVS.resources.dll
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{08A028CB-C02D-4EB6-A8D6-A3A340A0CBA7}

Use regedit.exe to delete the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\e-Manual Viewer\mvreader.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\e-Manual Viewer\mvreader.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GPPW2\GD2.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\GTD3_2000\GTD3_Startup.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\MRC2\MR2.EXE.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\MRC2\MR2.EXE.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\RT ToolBox3\MELFA_RT.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\RT ToolBox3\MELFA_RT.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\RT VisualBox\MELFA_RT-VB.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\RT VisualBox\RoboCom.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\MELSOFT\RT VisualBox\RoboCom.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\GX Works2 Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MELSOFT Mediative Server\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{897D59D2-56DB-4C5F-9F38-E30EE6A519B2}C:\program files (x86)\melsoft\gppw2\gd2.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{CD086306-FDC1-4F13-A40D-32F3EC51357F}C:\program files (x86)\melsoft\gppw2\gd2.exe

A way to erase GT Designer3 (GOT1000) from your PC using Advanced Uninstaller PRO

GT Designer3 (GOT1000) is an application marketed by MITSUBISHI ELECTRIC CORPORATION. Some computer users choose to remove it. Sometimes this is efortful because performing this manually requires some advanced knowledge regarding removing Windows programs manually. The best QUICK manner to remove GT Designer3 (GOT1000) is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to take care of your computer.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire the program's interface and number of functions available. Advanced Uninstaller PRO is a very useful system utility.

3. Press the General Tools button


4. Click on the Uninstall Programs tool


5. All the programs installed on the PC will appear

6. Navigate the list of programs until you locate GT Designer3 (GOT1000) or simply activate the Search field and type in "GT Designer3 (GOT1000)". If it exists on your system the GT Designer3 (GOT1000) application will be found very quickly. Notice that after you select GT Designer3 (GOT1000) in the list of apps, the following data about the program is made available to you:

• Safety rating (in the lower left corner). This tells you the opinion other people have about GT Designer3 (GOT1000), from "Highly recommended" to "Very dangerous".
• Reviews by other people - Press the Read reviews button.
• Technical information about the program you want to remove, by pressing the Properties button.

For example you can see that for GT Designer3 (GOT1000):

• The software company is: http://www.mitsubishielectric.com/fa/
• The uninstall string is: RunDll32

7. Press the Uninstall button. A window asking you to confirm will come up. Confirm the removal by pressing the Uninstall button. Advanced Uninstaller PRO will remove GT Designer3 (GOT1000).


8. After uninstalling GT Designer3 (GOT1000), Advanced Uninstaller PRO will offer to run a cleanup. Click Next to start the cleanup. All the items of GT Designer3 (GOT1000) which have been left behind will be found and you will be able to delete them. By uninstalling GT Designer3 (GOT1000) using Advanced Uninstaller PRO, you are assured that no registry entries, files or folders are left behind on your PC.

Your PC will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall GT Designer3 (GOT1000) by MITSUBISHI ELECTRIC CORPORATION from your computer, we are not saying that GT Designer3 (GOT1000) by MITSUBISHI ELECTRIC CORPORATION is not a good application for your PC. This page simply contains detailed instructions on how to uninstall GT Designer3 (GOT1000) in case you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.