spColumn v7.00

A way to uninstall spColumn v7.00 from your system

spColumn v7.00 is a software application. This page is comprised of details on how to uninstall it from your PC. It was coded for Windows by STRUCTUREPOINT, LLC. Open here where you can find out more on STRUCTUREPOINT, LLC. Click on https://www.StructurePoint.org to get more info about spColumn v7.00 on STRUCTUREPOINT, LLC's website. spColumn v7.00 is normally installed in the C:\Program Files (x86)\StructurePoint\spColumn directory, but this location can differ a lot depending on the user's option when installing the program. The full command line for uninstalling spColumn v7.00 is C:\Program Files (x86)\StructurePoint\spColumn\UNWISE.EXE C:\Program Files (x86)\StructurePoint\spColumn\INSTALL.LOG. Keep in mind that if you will type this command in Start / Run Note you may receive a notification for admin rights. spColumn v7.00's primary file takes around 4.77 MB (5005960 bytes) and is called spColumn.exe.

The executable files below are part of spColumn v7.00. They occupy an average of 6.74 MB (7071536 bytes) on disk.

• ACTIVATOR.EXE (897.63 KB)
• spColumn.exe (4.77 MB)
• UNWISE.EXE (177.13 KB)
• vregtool.exe (40.13 KB)
• wechoid.exe (689.63 KB)
• WiseUpdt.exe (212.63 KB)

...click to view all...

This info is about spColumn v7.00 version 7.00 alone. Following the uninstall process, the application leaves some files behind on the PC. Some of these are shown below.

Folders that were found:

• C:\Program Files (x86)\StructurePoint\spColumn
• C:\Users\%user%\AppData\Local\StructurePoint\spColumn

Check for and remove the following files from your disk when you uninstall spColumn v7.00:

• C:\Program Files (x86)\StructurePoint\spColumn\ACTIVATOR.EXE
• C:\Program Files (x86)\StructurePoint\spColumn\Caitf32.dll
• C:\Program Files (x86)\StructurePoint\spColumn\DocumentFormat.OpenXml.dll
• C:\Program Files (x86)\StructurePoint\spColumn\EULA.txt
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Batch File\Batch File Creation Guide.xls
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Batch File\Examples-Run from Program Installation Folder.bat
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Import File\Factored Loads.txt
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Import File\geometry.txt
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Import File\reinforcement.txt
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Import File\Service Loads.txt
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Circular Jacketed Steel Pile.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Circular Pile Reinforced Wall Uniaxial.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Circular Pipe Column.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Clover Shaped Column.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\C-Shaped Shear Wall.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Circular Jacketed Steel Pile.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Circular Pile Reinforced Wall Uniaxial.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Circular Pipe Column.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Clover Shaped Column.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\C-Shaped Shear Wall.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Hexagonal Bridge Pier.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\I-Shaped Beam Column.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\I-Shaped Shear Wall.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Oval Pier Jacketed Steel Pile.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Oval Shaped Column.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Precast Concrete Culvert-Viaduct.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Precast Underground Manhole.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Rectangular Bridge Pier Chamfered.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Rectangular Column with Circular Opening.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Rectangular Tube Column .cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Square Bridge Pier Rounded.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Square Jacketed Circular Pile.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\Square Tube Column Corner Feature.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\T-Shaped Column Pilaster Tied Uniaxial.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\CTI Files\U-Shaped Precast Trench.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Circular Jacketed Steel Pile.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Circular Pile Reinforced Wall Uniaxial.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Circular Pipe Column.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Clover Shaped Column.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\C-Shaped Shear Wall.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Hexagonal Bridge Pier.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\I-Shaped Beam Column.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\I-Shaped Shear Wall.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Oval Pier Jacketed Steel Pile.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Oval Shaped Column.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Precast Concrete Culvert-Viaduct.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Precast Underground Manhole.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Rectangular Bridge Pier Chamfered.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Rectangular Column with Circular Opening.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Rectangular Tube Column.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Square Bridge Pier Rounded.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Square Jacketed Circular Pile.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\Square Tube Column Corner Feature.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\T-Shaped Column Pilaster Tied Uniaxial.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\DXF Files\U-Shaped Precast Trench.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Hexagonal Bridge Pier.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\I-Shaped Beam Column.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\I-Shaped Shear Wall.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Oval Pier Jacketed Steel Pile.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Oval Shaped Column.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Precast Concrete Culvert-Viaduct.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Precast Underground Manhole.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Rectangular Bridge Pier Chamfered.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Rectangular Column with Circular Opening.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Rectangular Tube Column .col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Square Bridge Pier Rounded.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Square Jacketed Circular Pile.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\Square Tube Column Corner Feature.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\T-Shaped Column Pilaster Tied Uniaxial.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Irregular\U-Shaped Precast Trench.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example01.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example02.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example03.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example04.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example05.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\CTI Files\Example06.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example01.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example02.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example03.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example04.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example05.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\DXF Files\Example06.dxf
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example01.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example02.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example03.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example04.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example05.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Manual\Example06.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\Circular Caisson Investigation Tied Confinement Metric.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\Circular Column Other Confinement.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\Circular Column Tied Confinement.col
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Circular Caisson Investigation Tied Confinement Metric.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Circular Column Other Confinement.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\circular column spiral confinement.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Circular Column Tied Confinement.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Rectangular Bridge Pier Tied Uniaxial.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Square Column Slender Nonsway Frame.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Square Column Short Biaxial.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\CTI Files\Square Column Slender Sway Frame.cti
• C:\Program Files (x86)\StructurePoint\spColumn\Examples\Examples-Regular\DXF Files\Circular Caisson Investigation Tied Confinement Metric.dxf

Use regedit.exe to manually remove from the Windows Registry the keys below:

• HKEY_CLASSES_ROOT\spColumn.Input.col
• HKEY_CLASSES_ROOT\spColumn.Input.cti
• HKEY_CURRENT_USER\Software\StructurePoint\spColumn
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\spColumn v7.00
• HKEY_LOCAL_MACHINE\Software\StructurePoint\spColumn
• HKEY_LOCAL_MACHINE\Software\Wise Solutions\WiseUpdate\Apps\spColumn v7.00

Registry values that are not removed from your computer:

• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-3696992676-565653483-353203390-1000\\Device\HarddiskVolume2\Program Files (x86)\StructurePoint\spColumn\UNWISE.EXE

A way to delete spColumn v7.00 from your PC with the help of Advanced Uninstaller PRO

spColumn v7.00 is a program released by STRUCTUREPOINT, LLC. Sometimes, computer users want to uninstall this program. This can be difficult because deleting this manually requires some know-how related to Windows internal functioning. The best SIMPLE manner to uninstall spColumn v7.00 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and general tool to clean your Windows computer.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's design and number of functions available. Advanced Uninstaller PRO is a very good Windows optimizer.

3. Press the General Tools category


4. Press the Uninstall Programs tool


5. All the programs existing on the PC will be made available to you

6. Scroll the list of programs until you locate spColumn v7.00 or simply click the Search field and type in "spColumn v7.00". The spColumn v7.00 application will be found automatically. Notice that when you select spColumn v7.00 in the list of applications, some data regarding the application is made available to you:

• Star rating (in the left lower corner). This explains the opinion other users have regarding spColumn v7.00, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information regarding the program you want to uninstall, by pressing the Properties button.

For instance you can see that for spColumn v7.00:

• The publisher is: https://www.StructurePoint.org
• The uninstall string is: C:\Program Files (x86)\StructurePoint\spColumn\UNWISE.EXE C:\Program Files (x86)\StructurePoint\spColumn\INSTALL.LOG

7. Press the Uninstall button. A confirmation window will appear. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will uninstall spColumn v7.00.


8. After removing spColumn v7.00, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to perform the cleanup. All the items of spColumn v7.00 which have been left behind will be found and you will be asked if you want to delete them. By removing spColumn v7.00 using Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your system.

Your PC will remain clean, speedy and able to run without errors or problems.

Disclaimer

The text above is not a piece of advice to remove spColumn v7.00 by STRUCTUREPOINT, LLC from your PC, nor are we saying that spColumn v7.00 by STRUCTUREPOINT, LLC is not a good application. This page only contains detailed info on how to remove spColumn v7.00 in case you decide this is what you want to do. Here you can find registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.