Publishers

nanoCAD 5.1 nanoCAD 5.1





How to uninstall nanoCAD 5.1 from your system

nanoCAD 5.1 is a computer program. This page holds details on how to remove it from your computer. It was developed for Windows by Nanosoft. You can read more on Nanosoft or check for application updates here. nanoCAD 5.1 is typically installed in the C:\Program Files (x86)\Nanosoft\nanoCAD 5.1 directory, however this location can differ a lot depending on the user's option while installing the application. nanoCAD 5.1's full uninstall command line is MsiExec.exe /I{B01761B9-B734-4665-9F8F-49BE73A4AF37}. nCad.exe is the programs's main file and it takes close to 234.01 KB (239624 bytes) on disk.

The following executable files are incorporated in nanoCAD 5.1. They occupy 3.65 MB (3822200 bytes) on disk.

  • nCad.exe (234.01 KB)
  • RegWizard.exe (3.42 MB)


This data is about nanoCAD 5.1 version 5.1.2524.2017 alone. Click on the links below for other nanoCAD 5.1 versions:


Following the uninstall process, the application leaves some files behind on the PC. Part_A few of these are listed below.

Folders left behind when you uninstall nanoCAD 5.1:
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1

Generally, the following files are left on disk:
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\arsbinop.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\arunstor.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\AutoSurfServices_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\baseRasterCmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\compfact.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\confman2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csabsview.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csalgo.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csbbox.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cscbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cscmdline.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csicore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csruler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cssaver.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csve.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csviewscmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csxml.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\D3DCompiler_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\d3dx9_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\dde5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ddot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\docbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\docdatacontainer.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\DwfCore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\DwfToolkit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\edc5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ET.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\events5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ExFieldEvaluator_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\binfmt.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\bmp5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\dwgoda.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\olebase.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\pcx5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\png.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\tiff2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\geodata.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcmdcenter.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcommands.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcurvefunctions.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostdbmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostdcl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hosteditors.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostentityintersection.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostevals.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgeomutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgldevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgrips.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgsmanager.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostiengine.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostIntegrator.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostkacmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostlisp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmancmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmatchprops.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostnorma.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostopm.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplotdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplusdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostsel.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostunderlay.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostvectorizerutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostxdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\htmlayout.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ilistctrl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\inspctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ioman5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ixvstorage.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mapimgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McCOM2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McContour.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcCoreSymbols.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McData.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcDDGate3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcDDLoader3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McGeL.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MCSBrowser.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MCSParams.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McTyp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MechCtl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\modeler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ModelerGeometry_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MT.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mtedit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd1.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ncauto.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nDimStyle3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\newbtns.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\newimagedlg.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nrxgate.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nrxgatemgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdaX.tlb
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdaX_csd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdOleItemHandler_csd.tx

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_CLASSES_ROOT\nanoCAD.Application.5.0
  • HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\DOMStorage\nanocad.ru
  • HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\DOMStorage\www.nanocad.ru
  • HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\LowRegistry\DOMStorage\nanocad.ru
  • HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\LowRegistry\DOMStorage\www.nanocad.ru
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{B01761B9-B734-4665-9F8F-49BE73A4AF37}

Supplementary values that are not removed:
  • HKEY_CLASSES_ROOT\.dwg\OpenWithProgids\nanoCAD.Drawing.5.1
  • HKEY_CLASSES_ROOT\Installer\Features\9B16710B437B5664F9F894EB374AFA73\nanoCAD


A way to uninstall nanoCAD 5.1 using Advanced Uninstaller PRO

nanoCAD 5.1 is a program marketed by Nanosoft. Sometimes, computer users choose to uninstall it. Sometimes this is efortful because uninstalling this by hand takes some know-how regarding PCs. The best QUICK way to uninstall nanoCAD 5.1 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and general utility to optimize your Windows PC.

DOWNLOAD NOW

  • visit Download Link
  • download the program by clicking on the DOWNLOAD button
  • set up Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's design and wealth of functions available. Advanced Uninstaller PRO is a very useful system utility.

3. Click on the General Tools category
Go to General Tools


4. Activate the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs existing on your PC will be shown to you

6. Navigate the list of programs until you find nanoCAD 5.1 or simply click the Search feature and type in "nanoCAD 5.1". The nanoCAD 5.1 application will be found automatically. After you select nanoCAD 5.1 in the list of applications, some data about the application is available to you:


  • Star rating (in the lower left corner). This tells you the opinion other people have about nanoCAD 5.1, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Technical information about the application you are about to remove, by clicking on the Properties button.
7. Press the Uninstall button. A confirmation page will appear. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will uninstall nanoCAD 5.1.
Uninstall nanoCAD 5.1


8. After removing nanoCAD 5.1, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to proceed with the cleanup. All the items of nanoCAD 5.1 that have been left behind will be found and you will be asked if you want to delete them. By uninstalling nanoCAD 5.1 with Advanced Uninstaller PRO, you are assured that no registry entries, files or directories are left behind on your computer.

Your system will remain clean, speedy and ready to run without errors or problems.

DOWNLOAD NOW


Geographical user distribution

  • Windows 8 (6.2)
  • Windows 8.1 (6.3)
  • Windows 7 (6.1)
  • 10.0
  • Windows XP (5.1)
Software Application


Disclaimer

The text above is not a piece of advice to uninstall nanoCAD 5.1 by Nanosoft from your computer, we are not saying that nanoCAD 5.1 by Nanosoft is not a good application for your computer. This page simply contains detailed info on how to uninstall nanoCAD 5.1 in case you decide this is what you want to do. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2016-06-28 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-06-28 10:51:56.140