Publishers

nanoCAD 5.0 nanoCAD 5.0





A way to uninstall nanoCAD 5.0 from your PC

This page contains thorough information on how to uninstall nanoCAD 5.0 for Windows. The Windows version was created by Nanosoft. You can find out more on Nanosoft or check for application updates here. Usually the nanoCAD 5.0 application is installed in the C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0 directory, depending on the user's option during install. The full command line for removing nanoCAD 5.0 is MsiExec.exe /X{6D4250F7-DB33-4530-A9BD-A9D66BA34586}. Note that if you will type this command in Start / Run Note you may get a notification for administrator rights. nCad.exe is the programs's main file and it takes close to 234.01 KB (239624 bytes) on disk.

The executables below are part of nanoCAD 5.0. They occupy about 3.75 MB (3933200 bytes) on disk.

  • nCad.exe (234.01 KB)
  • RegWizard.exe (3.52 MB)


The information on this page is only about version 5.0.2520.2000 of nanoCAD 5.0. You can find below a few links to other nanoCAD 5.0 versions:


If you are manually uninstalling nanoCAD 5.0 we recommend you to verify if the following data is left behind on your PC.

Folders found on disk after you uninstall nanoCAD 5.0 from your computer:
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0
  • C:\Users\%user%\AppData\Roaming\Nanosoft\nanoCAD Int 5.0

Files remaining:
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\arsbinop.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\arunstor.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\AutoSurfServices_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\baseRasterCmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\compfact.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\confman2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csabsview.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csalgo.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csbbox.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\cscbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\cscmdline.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csicore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csruler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\cssaver.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csve.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csviewscmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\csxml.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\D3DCompiler_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\d3dx9_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\dde5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ddot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\docbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\docdatacontainer.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\DwfCore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\DwfToolkit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\edc5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ET.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\events5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ExFieldEvaluator_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\binfmt.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\bmp5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\dwgoda.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\olebase.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\pcx5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\png.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\formats\tiff2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\geodata.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostcmdcenter.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostcommands.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostcurvefunctions.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostdbmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostdcl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hosteditors.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostentityintersection.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostevals.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostgeomutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostgldevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostgrips.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostgsmanager.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostiengine.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostIntegrator.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostkacmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostlisp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostmancmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostmatchprops.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostnorma.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostopm.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostplot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostplotdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostplusdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostsel.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostunderlay.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostvectorizerutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\hostxdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\htmlayout.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ilistctrl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\inspctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ioman5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ixvstorage.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\mapimgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\McCOM2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\McContour.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\mcCoreSymbols.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\McData.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\mcDDGate3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\mcDDLoader3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\McGeL.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\MCSBrowser.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\MCSParams.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\McTyp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\MechCtl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\modeler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ModelerGeometry_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\MT.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\mtedit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nanocmd1.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nanocmd2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nanocmd3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\ncauto.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nDimStyle3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\newbtns.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\newimagedlg.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nrxgate.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\nrxgatemgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\OdaX.tlb
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\OdaX_csd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\bin\OdOleItemHandler_csd.tx

Registry keys:
  • HKEY_CLASSES_ROOT\nanoCAD.Application
  • HKEY_CLASSES_ROOT\nanoCAD.Drawing.5.0
  • HKEY_CLASSES_ROOT\nanoCAD.Template.5.0
  • HKEY_CURRENT_USER\Software\Nanosoft\nanoCAD Int
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\7F0524D633BD03549ADB9A6DB63A5468
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{6D4250F7-DB33-4530-A9BD-A9D66BA34586}
  • HKEY_LOCAL_MACHINE\Software\Nanosoft\nanoCAD Int

Registry values that are not removed from your PC:
  • HKEY_CLASSES_ROOT\.dwg\OpenWithProgids\nanoCAD.Drawing.5.0
  • HKEY_CLASSES_ROOT\Installer\Features\7F0524D633BD03549ADB9A6DB63A5468\nanoCAD
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\nCad.exe.ApplicationCompany
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Nanosoft\nanoCAD en 5.0\nCad.exe.FriendlyAppName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\7F0524D633BD03549ADB9A6DB63A5468\ProductName


A way to remove nanoCAD 5.0 from your computer using Advanced Uninstaller PRO

nanoCAD 5.0 is a program marketed by Nanosoft. Sometimes, computer users try to uninstall this application. This can be hard because uninstalling this manually takes some know-how related to removing Windows programs manually. The best SIMPLE approach to uninstall nanoCAD 5.0 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and general utility to maximize the performance of your Windows system.

DOWNLOAD NOW

  • navigate to Download Link
  • download the setup by pressing the DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a powerful Windows tool.

3. Press the General Tools category
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. All the programs installed on your PC will be shown to you

6. Navigate the list of programs until you locate nanoCAD 5.0 or simply activate the Search field and type in "nanoCAD 5.0". The nanoCAD 5.0 application will be found automatically. After you click nanoCAD 5.0 in the list of applications, some information regarding the application is available to you:


  • Safety rating (in the lower left corner). This explains the opinion other users have regarding nanoCAD 5.0, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Press the Read reviews button.
  • Technical information regarding the app you are about to uninstall, by pressing the Properties button.
7. Click the Uninstall button. A confirmation window will appear. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will then uninstall nanoCAD 5.0.
Uninstall nanoCAD 5.0


8. After uninstalling nanoCAD 5.0, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to proceed with the cleanup. All the items that belong nanoCAD 5.0 that have been left behind will be found and you will be able to delete them. By removing nanoCAD 5.0 using Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your system.

Your PC will remain clean, speedy and ready to take on new tasks.



Geographical user distribution

  • Windows 7 (6.1)
  • 10.0
  • Windows 8.1 (6.3)
  • Windows Vista (6.0)
  • Windows XP (5.1)
  • Windows 8 (6.2)
Software Application


Disclaimer

This page is not a recommendation to uninstall nanoCAD 5.0 by Nanosoft from your computer, we are not saying that nanoCAD 5.0 by Nanosoft is not a good application. This text only contains detailed info on how to uninstall nanoCAD 5.0 supposing you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2016-06-20 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-06-20 07:54:49.333