nanoCAD Схемы 2.0

A way to uninstall nanoCAD Схемы 2.0 from your PC

nanoCAD Схемы 2.0 is a Windows application. Read more about how to uninstall it from your computer. It is developed by Nanosoft. You can read more on Nanosoft or check for application updates here. Usually the nanoCAD Схемы 2.0 program is placed in the C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0 folder, depending on the user's option during setup. The full command line for uninstalling nanoCAD Схемы 2.0 is MsiExec.exe /I{3F2453CB-F752-4C44-B188-76B3C314C337}. Keep in mind that if you will type this command in Start / Run Note you may get a notification for administrator rights. NCad.exe is the nanoCAD Схемы 2.0's primary executable file and it takes about 1.90 MB (1990432 bytes) on disk.

nanoCAD Схемы 2.0 installs the following the executables on your PC, taking about 5.32 MB (5574544 bytes) on disk.

• NCad.exe (1.90 MB)
• RegWizard.exe (3.42 MB)

The information on this page is only about version 2.0.1859.246 of nanoCAD Схемы 2.0. Many files, folders and Windows registry data will not be deleted when you are trying to remove nanoCAD Схемы 2.0 from your PC.

Directories that were left behind:

• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0
• C:\Users\%user%\AppData\Roaming\Nanosoft\nanoCAD Схемы 2.0

The files below remain on your disk by nanoCAD Схемы 2.0 when you uninstall it:

• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\arsbinop.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\arunstor.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\AutoSurfServices_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\compfact.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\confman2.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csabsview.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csalgo.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csbbox.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\cscbar.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\cscmdline.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csctl.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csicore.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csruler.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\cssaver.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csve.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csviewscmd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\csxml.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\dde5.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ddot.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\docbar.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\docdatacontainer.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\DWFCore.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\DwfToolkit.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\edc5.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ET.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\events5.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ExEvalWatchers_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ExFieldEvaluator_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\binfmt.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\bmp5.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\dwgoda.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\olebase.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\png.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\formats\tiff2.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\geodata.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostcommands.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostcurvefunctions.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hosteditors.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostentityintersection.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostevals.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostgldevice.gs
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostgrips.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostgsmanager.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostiengine.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostkacmd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostmancmd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostmatchprops.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostopm.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostplot.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostplotdevice.gs
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostsel.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\hostutils.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ilistctrl.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\inspctl.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ioman5.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ixvstorage.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\McCOM2.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\McContour.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\mcCoreSymbols.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\McData.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\mcDDGate3.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\mcDDLoader3.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\McGeL.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\MCSBrowser.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\MCSParams.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\McTyp.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\MechCtl.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\modeler.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ModelerGeometry_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\MT.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\mtedit.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\nanocmd1.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\nanocmd2.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\nanocmd3.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\ncauto.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\nDimStyle3.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\newbtns.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\newimagedlg.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\OdaX.tlb
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\OdaX_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\OdBagFiler_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\OdOleItemHandler_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\odpropmanager.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\odtraitsmodify.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\oeminfo.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\prefcmd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\progress.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\RecomputeDimBlock_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\script.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\shxfnt.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\styleman.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\tcrstor64.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_AcisBuilder_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_Alloc_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_Ave_csd.tx
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_BmpExport_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_Br_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_BrepRenderer_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_Db_csd.dll
• C:\Program Files (x86)\Nanosoft\nanoCAD Схемы 2.0\bin\TD_DbRoot_csd.dll

Registry that is not removed:

• HKEY_CLASSES_ROOT\nanoCAD_Schema.Drawing.2.0
• HKEY_CLASSES_ROOT\nanoCAD_Schema.Template.2.0
• HKEY_CURRENT_USER\Software\Nanosoft\nanoCAD Схемы
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BC3542F3257F44C41B88673B3C413C73
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{3F2453CB-F752-4C44-B188-76B3C314C337}
• HKEY_LOCAL_MACHINE\Software\Nanosoft\nanoCAD Схемы

Open regedit.exe to delete the registry values below from the Windows Registry:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BC3542F3257F44C41B88673B3C413C73\ProductName

How to erase nanoCAD Схемы 2.0 from your PC with Advanced Uninstaller PRO

nanoCAD Схемы 2.0 is an application offered by the software company Nanosoft. Some computer users decide to erase this program. This is difficult because deleting this manually requires some advanced knowledge related to Windows program uninstallation. The best SIMPLE way to erase nanoCAD Схемы 2.0 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to maximize the performance of your PC.

DOWNLOAD NOW

• navigate to Download Link
• download the program by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to admire the program's interface and wealth of features available. Advanced Uninstaller PRO is a very good PC management program.

3. Press the General Tools button


4. Click on the Uninstall Programs feature


5. A list of the applications existing on your PC will appear

6. Scroll the list of applications until you find nanoCAD Схемы 2.0 or simply click the Search feature and type in "nanoCAD Схемы 2.0". The nanoCAD Схемы 2.0 app will be found very quickly. When you select nanoCAD Схемы 2.0 in the list of programs, some information regarding the program is made available to you:

• Star rating (in the lower left corner). This tells you the opinion other users have regarding nanoCAD Схемы 2.0, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information regarding the application you wish to uninstall, by pressing the Properties button.

7. Press the Uninstall button. A confirmation dialog will appear. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will then uninstall nanoCAD Схемы 2.0.


8. After uninstalling nanoCAD Схемы 2.0, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to start the cleanup. All the items that belong nanoCAD Схемы 2.0 which have been left behind will be detected and you will be able to delete them. By removing nanoCAD Схемы 2.0 with Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or directories are left behind on your disk.

Your Windows computer will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

This page is not a piece of advice to uninstall nanoCAD Схемы 2.0 by Nanosoft from your computer, we are not saying that nanoCAD Схемы 2.0 by Nanosoft is not a good software application. This text simply contains detailed instructions on how to uninstall nanoCAD Схемы 2.0 supposing you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.