Publishers

nanoCAD 2.0 nanoCAD 2.0





A way to uninstall nanoCAD 2.0 from your computer

nanoCAD 2.0 is a Windows application. Read below about how to remove it from your PC. It is written by Nanosoft. You can read more on Nanosoft or check for application updates here. nanoCAD 2.0 is normally installed in the C:\Program Files (x86)\Nanosoft\nanoCAD 2.0 directory, depending on the user's choice. You can uninstall nanoCAD 2.0 by clicking on the Start menu of Windows and pasting the command line MsiExec.exe /I{6FE110A0-65CA-4030-AEAC-BD2351482870}. Keep in mind that you might receive a notification for administrator rights. The application's main executable file occupies 233.64 KB (239248 bytes) on disk and is titled nCad.exe.

The following executables are installed beside nanoCAD 2.0. They occupy about 1.64 MB (1718560 bytes) on disk.

  • nCad.exe (233.64 KB)
  • RegWizard.exe (1.41 MB)


The information on this page is only about version 2.0.1595.1045 of nanoCAD 2.0. When you're planning to uninstall nanoCAD 2.0 you should check if the following data is left behind on your PC.

Folders that were left behind:
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1
  • C:\Users\%user%\AppData\Roaming\Nanosoft\nanoCAD 2.0
  • C:\Users\%user%\AppData\Roaming\Nanosoft\nanoCAD 5.1

The files below are left behind on your disk by nanoCAD 2.0's application uninstaller when you removed it:
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\arsbinop.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\arunstor.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\AutoSurfServices_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\baseRasterCmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\compfact.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\confman2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csabsview.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csalgo.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csbbox.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cscbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cscmdline.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csicore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csruler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\cssaver.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csve.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csviewscmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\csxml.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\D3DCompiler_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\d3dx9_43.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\dde5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ddot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\docbar.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\docdatacontainer.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\DwfCore.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\DwfToolkit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\edc5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ET.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\events5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ExFieldEvaluator_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\binfmt.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\bmp5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\dwgoda.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\olebase.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\pcx5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\png.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\formats\tiff2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\geodata.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcmdcenter.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcommands.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostcurvefunctions.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostdbmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostdcl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hosteditors.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostentityintersection.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostevals.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgeomutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgldevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgrips.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostgsmanager.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostiengine.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostIntegrator.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostkacmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostlisp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmancmd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmatchprops.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostmgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostnorma.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostopm.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplot.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplotdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostplusdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostsel.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostunderlay.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostvectorizerutils.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\hostxdevice.gs
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\htmlayout.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ilistctrl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\inspctl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ioman5.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ixvstorage.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mapimgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McCOM2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McContour.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcCoreSymbols.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McData.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcDDGate3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mcDDLoader3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McGeL.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MCSBrowser.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MCSParams.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\McTyp.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MechCtl.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\modeler.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ModelerGeometry_csd.tx
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\MT.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\mtedit.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd1.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd2.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nanocmd3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\ncauto.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nDimStyle3.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\newbtns.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\newimagedlg.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nrxgate.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\nrxgatemgd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdaX.tlb
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdaX_csd.dll
  • C:\Program Files (x86)\Nanosoft\nanoCAD 5.1\bin\OdOleItemHandler_csd.tx

Generally the following registry keys will not be removed:
  • HKEY_CLASSES_ROOT\nanoCAD.Application
  • HKEY_CLASSES_ROOT\nanoCAD.Drawing.5.1
  • HKEY_CLASSES_ROOT\nanoCAD.Template.5.1
  • HKEY_CURRENT_USER\Software\Nanosoft\nanoCAD
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\0A011EF6AC560304EACADB3215848207
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\9B16710B437B5664F9F894EB374AFA73
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{6FE110A0-65CA-4030-AEAC-BD2351482870}
  • HKEY_LOCAL_MACHINE\Software\Nanosoft\nanoCAD

Open regedit.exe in order to delete the following registry values:
  • HKEY_CLASSES_ROOT\.dwg\OpenWithProgids\nanoCAD.Drawing.2.0
  • HKEY_CLASSES_ROOT\.dwg\OpenWithProgids\nanoCAD.Drawing.5.1
  • HKEY_CLASSES_ROOT\Installer\Features\9B16710B437B5664F9F894EB374AFA73\nanoCAD
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\0A011EF6AC560304EACADB3215848207\ProductName
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\9B16710B437B5664F9F894EB374AFA73\ProductName
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-2797097536-211012328-567349260-1001\\Device\HarddiskVolume3\Program Files (x86)\Nanosoft\nanoCAD 5.1\nCad.exe


How to erase nanoCAD 2.0 from your computer with the help of Advanced Uninstaller PRO

nanoCAD 2.0 is an application offered by the software company Nanosoft. Sometimes, people try to uninstall it. This can be easier said than done because deleting this by hand requires some advanced knowledge related to removing Windows applications by hand. One of the best QUICK manner to uninstall nanoCAD 2.0 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to take care of your Windows system.

DOWNLOAD NOW

  • navigate to Download Link
  • download the setup by clicking on the green DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take your time to admire the program's design and wealth of tools available. Advanced Uninstaller PRO is a powerful system optimizer.

3. Click on the General Tools category
Go to General Tools


4. Press the Uninstall Programs tool
Go to Uninstall Programs


5. All the applications installed on the computer will be made available to you

6. Navigate the list of applications until you find nanoCAD 2.0 or simply click the Search feature and type in "nanoCAD 2.0". If it exists on your system the nanoCAD 2.0 app will be found automatically. When you click nanoCAD 2.0 in the list of apps, some data about the program is shown to you:


  • Star rating (in the left lower corner). The star rating tells you the opinion other people have about nanoCAD 2.0, from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Technical information about the app you wish to remove, by clicking on the Properties button.
7. Click the Uninstall button. A confirmation page will show up. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will remove nanoCAD 2.0.
Uninstall nanoCAD 2.0


8. After uninstalling nanoCAD 2.0, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to go ahead with the cleanup. All the items of nanoCAD 2.0 which have been left behind will be detected and you will be able to delete them. By uninstalling nanoCAD 2.0 with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or directories are left behind on your computer.

Your Windows system will remain clean, speedy and ready to serve you properly.



Disclaimer

This page is not a recommendation to uninstall nanoCAD 2.0 by Nanosoft from your PC, we are not saying that nanoCAD 2.0 by Nanosoft is not a good application for your computer. This page simply contains detailed info on how to uninstall nanoCAD 2.0 supposing you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.

2016-06-03 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-06-03 17:47:02.470