cncKad V16

A guide to uninstall cncKad V16 from your system

You can find on this page detailed information on how to remove cncKad V16 for Windows. It was developed for Windows by Metalix. You can read more on Metalix or check for application updates here. Further information about cncKad V16 can be found at http://www.Metalix.com. Usually the cncKad V16 program is installed in the C:\Metalix directory, depending on the user's option during setup. You can uninstall cncKad V16 by clicking on the Start menu of Windows and pasting the command line C:\Program Files (x86)\InstallShield Installation Information\{C5D5DF13-A1C0-4D70-A4D5-1594009B9BA7}\setup.exe. Note that you might be prompted for administrator rights. The application's main executable file is titled setup.exe and occupies 1.14 MB (1191936 bytes).

The following executables are incorporated in cncKad V16. They occupy 1.14 MB (1191936 bytes) on disk.

• setup.exe (1.14 MB)

The current web page applies to cncKad V16 version 16 alone. Some files, folders and Windows registry data will not be deleted when you remove cncKad V16 from your PC.

Folders found on disk after you uninstall cncKad V16 from your PC:

• C:\Metalix

Check for and delete the following files from your disk when you uninstall cncKad V16:

• C:\Metalix\cncKad.16\AcIdViewObj_4.00_10.tx
• C:\Metalix\cncKad.16\ANDB.dll
• C:\Metalix\cncKad.16\Anschl.bmp
• C:\Metalix\cncKad.16\AutoNest.exe
• C:\Metalix\cncKad.16\AutoNest.tlb
• C:\Metalix\cncKad.16\AutoNestn.exe
• C:\Metalix\cncKad.16\AutoNestStarter.exe
• C:\Metalix\cncKad.16\AutoPunch.dll
• C:\Metalix\cncKad.16\Bar_Bending_Library\T111.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T121.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T122.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T123.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T131.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T132.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T133.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T134.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T141.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T151.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T152.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T153.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T211.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T221.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T222.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T223.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T231.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T232.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T233.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T241.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T251.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T252.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T253.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T311.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T312.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T314.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T321.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T322.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T411.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T412.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T421.bmp
• C:\Metalix\cncKad.16\Bar_Bending_Library\T422.bmp
• C:\Metalix\cncKad.16\BCGCBPRO2320u100.dll
• C:\Metalix\cncKad.16\BMPLib.dll
• C:\Metalix\cncKad.16\Bwerkz.bmp
• C:\Metalix\cncKad.16\Clean_Metalix_Reg_V16.reg
• C:\Metalix\cncKad.16\ClientOps.dll
• C:\Metalix\cncKad.16\CLIWrapper.dll
• C:\Metalix\cncKad.16\cmax40.dll
• C:\Metalix\cncKad.16\Cnc1Ara.txt
• C:\Metalix\cncKad.16\Cnc1bul.txt
• C:\Metalix\cncKad.16\cnc1chi.txt
• C:\Metalix\cncKad.16\cnc1chi_default.txt
• C:\Metalix\cncKad.16\cnc1chi_Hans.txt
• C:\Metalix\cncKad.16\cnc1cht.txt
• C:\Metalix\cncKad.16\cnc1cze.txt
• C:\Metalix\cncKad.16\Cnc1dan.txt
• C:\Metalix\cncKad.16\cnc1dut.txt
• C:\Metalix\cncKad.16\Cnc1eng.txt
• C:\Metalix\cncKad.16\Cnc1eng1.txt
• C:\Metalix\cncKad.16\Cnc1fin.txt
• C:\Metalix\cncKad.16\Cnc1fre.txt
• C:\Metalix\cncKad.16\CNC1GER.TXT
• C:\Metalix\cncKad.16\cnc1grk.txt
• C:\Metalix\cncKad.16\CNC1HEB.TXT
• C:\Metalix\cncKad.16\Cnc1hun.txt
• C:\Metalix\cncKad.16\Cnc1ita.txt
• C:\Metalix\cncKad.16\cnc1jpn.txt
• C:\Metalix\cncKad.16\Cnc1kor.txt
• C:\Metalix\cncKad.16\cnc1pol.txt
• C:\Metalix\cncKad.16\CNC1POR.TXT
• C:\Metalix\cncKad.16\cnc1rom.txt
• C:\Metalix\cncKad.16\Cnc1rus.txt
• C:\Metalix\cncKad.16\cnc1slo.txt
• C:\Metalix\cncKad.16\cnc1slv.txt
• C:\Metalix\cncKad.16\cnc1spa.txt
• C:\Metalix\cncKad.16\Cnc1swe.txt
• C:\Metalix\cncKad.16\cnc1tai.TXT
• C:\Metalix\cncKad.16\Cnc1tha.txt
• C:\Metalix\cncKad.16\cnc1tur.txt
• C:\Metalix\cncKad.16\Cnc1vie.txt
• C:\Metalix\cncKad.16\cncKadStarter.exe
• C:\Metalix\cncKad.16\cncKadThumbnail.dll
• C:\Metalix\cncKad.16\Cncmsg.dll
• C:\Metalix\cncKad.16\CSH.DLL
• C:\Metalix\cncKad.16\CutToolpath.dll
• C:\Metalix\cncKad.16\demo1l.dft
• C:\Metalix\cncKad.16\demo2l.dft
• C:\Metalix\cncKad.16\demo3l.dft
• C:\Metalix\cncKad.16\demo4l.dft
• C:\Metalix\cncKad.16\demo5l.dft
• C:\Metalix\cncKad.16\demo6l.dft
• C:\Metalix\cncKad.16\demo7l.dft
• C:\Metalix\cncKad.16\demo8l.dft
• C:\Metalix\cncKad.16\demo9l.dft
• C:\Metalix\cncKad.16\DevExpress.BonusSkins.v15.1.dll
• C:\Metalix\cncKad.16\DevExpress.BonusSkins.v16.1.dll
• C:\Metalix\cncKad.16\DevExpress.Data.v15.1.dll
• C:\Metalix\cncKad.16\DevExpress.Data.v16.1.dll
• C:\Metalix\cncKad.16\DevExpress.Office.v15.1.Core.dll
• C:\Metalix\cncKad.16\DevExpress.Office.v16.1.Core.dll
• C:\Metalix\cncKad.16\DevExpress.Printing.v15.1.Core.dll

Registry that is not removed:

• HKEY_CURRENT_USER\Software\Metalix\cncKad V16
• HKEY_LOCAL_MACHINE\Software\Metalix\cncKad
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{C5D5DF13-A1C0-4D70-A4D5-1594009B9BA7}

Open regedit.exe to remove the values below from the Windows Registry:

• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Metalix\cncKad.16\AutoNest.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Metalix\cncKad.16\AutoNestn.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Metalix\cncKad.16\cncKadStarter.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Metalix\cncKad.16\gkadw.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Metalix\cncKad.16\gkadwn.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Users\UserName\Desktop\PM\Metalix_cncKad_16.4.325x64\Metalix_cncKad_16.4.325x64\Bin\demo32.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Users\UserName\Desktop\PM\Metalix_cncKad_16.4.325x64\Metalix_cncKad_16.4.325x64\Bin\HaspUser_Installer\setup.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Users\UserName\Desktop\PM\Metalix_cncKad_16.4.325x64\Metalix_cncKad_16.4.325x64\cncKad.16\Disk1\CadLink.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2146941708-3657706823-1799807879-1001\\Device\HarddiskVolume3\Users\UserName\Desktop\PM\Metalix_cncKad_16.4.325x64\Metalix_cncKad_16.4.325x64\cncKad.16\Disk1\setup.exe

A way to remove cncKad V16 with Advanced Uninstaller PRO

cncKad V16 is an application by the software company Metalix. Frequently, people try to uninstall it. This is hard because doing this manually requires some skill related to removing Windows applications by hand. One of the best SIMPLE practice to uninstall cncKad V16 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, install it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to optimize your Windows system.

DOWNLOAD NOW

• visit Download Link
• download the program by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to get familiar with the program's interface and wealth of features available. Advanced Uninstaller PRO is a very useful Windows optimizer.

3. Click on the General Tools category


4. Click on the Uninstall Programs feature


5. All the programs existing on the computer will be shown to you

6. Navigate the list of programs until you locate cncKad V16 or simply click the Search feature and type in "cncKad V16". The cncKad V16 program will be found automatically. Notice that when you click cncKad V16 in the list , the following information about the program is shown to you:

• Star rating (in the lower left corner). The star rating tells you the opinion other people have about cncKad V16, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details about the app you want to remove, by pressing the Properties button.

For instance you can see that for cncKad V16:

• The web site of the program is: http://www.Metalix.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{C5D5DF13-A1C0-4D70-A4D5-1594009B9BA7}\setup.exe

7. Click the Uninstall button. A confirmation dialog will show up. Confirm the removal by pressing the Uninstall button. Advanced Uninstaller PRO will remove cncKad V16.


8. After removing cncKad V16, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to go ahead with the cleanup. All the items of cncKad V16 which have been left behind will be detected and you will be able to delete them. By uninstalling cncKad V16 using Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or directories are left behind on your PC.

Your Windows computer will remain clean, speedy and ready to take on new tasks.

Disclaimer

The text above is not a piece of advice to uninstall cncKad V16 by Metalix from your PC, nor are we saying that cncKad V16 by Metalix is not a good application. This text simply contains detailed instructions on how to uninstall cncKad V16 in case you want to. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.