Yenka Server

How to uninstall Yenka Server from your PC

Yenka Server is a software application. This page is comprised of details on how to uninstall it from your PC. The Windows release was developed by Crocodile Clips Ltd. More information about Crocodile Clips Ltd can be read here. More info about the software Yenka Server can be seen at http://www.yenka.com. Usually the Yenka Server program is found in the C:\Program Files\Yenka\Server directory, depending on the user's option during setup. The entire uninstall command line for Yenka Server is RunDll32. Yenka.exe is the programs's main file and it takes close to 308.00 KB (315392 bytes) on disk.

Yenka Server contains of the executables below. They occupy 824.00 KB (843776 bytes) on disk.

• Yenka.exe (308.00 KB)
• assistant.exe (516.00 KB)

The current web page applies to Yenka Server version 2.1.0 only. You can find below info on other application versions of Yenka Server:

• 3.4.0

If you are manually uninstalling Yenka Server we recommend you to check if the following data is left behind on your PC.

You should delete the folders below after you uninstall Yenka Server:

• C:\Program Files\Yenka\Server

The files below remain on your disk by Yenka Server's application uninstaller when you removed it:

• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Character.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Crank.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Flywheel.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Gear pairs.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Generator.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Microswitch.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Motors.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Rack and pinion.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3D Solenoid.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\3rd party programming software.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\555 timer - pin functions.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\555 timer.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\7-segment display output table.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\7-segment display.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\8 resistors.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\About Yenka.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Action button.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adders.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding animation files.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding colours and images to shapes.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding contexts to models.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding movement to mechanisms.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Adding your own images to a shape.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Advanced pop-up settings.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Ammeter.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Analogue electronics.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\AND gate.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Animation.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Arranging objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Associations.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Attachment.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\banned variable names.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC (Revolution) commands.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC (STAMP) commands.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC hardware errors.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC software errors.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC viewer.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\BASIC.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Battery.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Bill of Materials.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Buffers and Drivers.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Building flowcharts.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Button.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Buzzer.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Call subroutine.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Can dispenser.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Capacitor.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Changing flowchart labels.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Changing mouse-click action.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Changing object properties.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Changing scale.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Changing the button on Custom logic objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Checkbox.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Choosing an object's 3D type.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Choosing topics.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Clock.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Closing the software.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Comparators.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Connecting mechanisms.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Constant current source.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Content pane.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Controlling animations with flowcharts.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Controlling the 3D camera.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Copying and pasting objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Counters - setting enable pin.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Counters - special features.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Counters.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Creating a printed circuit board (PCB).html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Creating and using models.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Creating nets.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Custom block.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Custom logic input.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Custom logic output.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Custom object.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Darlington driver.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Data selectors.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Decoders.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Delay (CT).html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Deleting objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Digital electronics.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Diode.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Disable interrupt.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Drop-down list.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\D-type flip-flop.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Edit box.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Editing gears.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Embedded microcontroller systems.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Example animation filenames.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Exclusive-NOR gate.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Exclusive-OR gate.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Executing flowcharts.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Exporting model data.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Exposing objects, controls or pads on the front of blocks.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Filament lamp.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Finding the circuit ground.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Finding your way around.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Flip-flops.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Flipping objects.html
• C:\Program Files\Yenka\Server\program files\Yenka\Locale\en_GB\Help\Float switch.html

Frequently the following registry data will not be removed:

• HKEY_LOCAL_MACHINE\Software\Crocodile Clips Ltd\Yenka Server
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{F94D2FC5-59E3-476B-B971-29886D4DACB9}

A way to erase Yenka Server from your PC using Advanced Uninstaller PRO

Yenka Server is an application by the software company Crocodile Clips Ltd. Some people choose to erase this application. Sometimes this is troublesome because removing this manually takes some knowledge regarding removing Windows programs manually. One of the best EASY approach to erase Yenka Server is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, add it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and all around tool to maximize the performance of your system.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to get familiar with Advanced Uninstaller PRO's design and number of features available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools button


4. Activate the Uninstall Programs tool


5. All the programs existing on your PC will appear

6. Navigate the list of programs until you locate Yenka Server or simply click the Search feature and type in "Yenka Server". If it is installed on your PC the Yenka Server application will be found very quickly. When you select Yenka Server in the list of apps, some information about the program is available to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other people have about Yenka Server, from "Highly recommended" to "Very dangerous".
• Opinions by other people - Click on the Read reviews button.
• Details about the application you want to remove, by pressing the Properties button.

For example you can see that for Yenka Server:

• The web site of the program is: http://www.yenka.com
• The uninstall string is: RunDll32

7. Press the Uninstall button. A confirmation page will come up. accept the uninstall by pressing Uninstall. Advanced Uninstaller PRO will uninstall Yenka Server.


8. After uninstalling Yenka Server, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to perform the cleanup. All the items of Yenka Server which have been left behind will be found and you will be asked if you want to delete them. By uninstalling Yenka Server using Advanced Uninstaller PRO, you are assured that no registry entries, files or directories are left behind on your disk.

Your PC will remain clean, speedy and able to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a piece of advice to uninstall Yenka Server by Crocodile Clips Ltd from your PC, nor are we saying that Yenka Server by Crocodile Clips Ltd is not a good software application. This page simply contains detailed instructions on how to uninstall Yenka Server in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.