WinPCSIGN Basic 2012 WinPCSIGN Basic 2012



A way to uninstall WinPCSIGN Basic 2012 from your system

WinPCSIGN Basic 2012 is a software application. This page holds details on how to uninstall it from your PC. It was coded for Windows by SignMax. You can find out more on SignMax or check for application updates here. Further information about WinPCSIGN Basic 2012 can be seen at . WinPCSIGN Basic 2012 is usually set up in the C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012 directory, but this location can vary a lot depending on the user's choice when installing the program. The full command line for removing WinPCSIGN Basic 2012 is C:\Program Files (x86)\InstallShield Installation Information\{78ABD478-3EAF-4CFE-BA62-B5CD5143F922}\setup.exe -runfromtemp -l0x0009 -removeonly. Keep in mind that if you will type this command in Start / Run Note you may get a notification for admin rights. WinPCSIGN.exe is the WinPCSIGN Basic 2012's main executable file and it occupies close to 24.07 MB (25235456 bytes) on disk.

WinPCSIGN Basic 2012 installs the following the executables on your PC, occupying about 40.65 MB (42626337 bytes) on disk.



  • CreerLogodbs.exe (15.00 KB)
  • pdftk.exe (5.64 MB)
  • RegDelete.exe (32.00 KB)
  • Welcome to WinPCSIGN.exe (10.90 MB)
  • WinPCSIGN.exe (24.07 MB)


This info is about WinPCSIGN Basic 2012 version 12.2.3 only. Click on the links below for other WinPCSIGN Basic 2012 versions:

...click to view all...
A considerable amount of files, folders and Windows registry entries can be left behind when you want to remove WinPCSIGN Basic 2012 from your PC.

Directories that were found:
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012

Check for and delete the following files from your disk when you uninstall WinPCSIGN Basic 2012:
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\{87CC6B63-DD85-4604-8152-B2545D6975A3}\WinPCSIGN Basic 2012.msi
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\armdll32.dll
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\AWCODC32.DLL
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\AWDCXC32.DLL
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\AWDENC32.DLL
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\AWRESX32.DLL
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\AWVIEW32.DLL
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\Camera\DC265Ifr.ocx
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\Camera\DC265Ser.ocx
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\Camera\DC265USB.ocx
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CDRAPCLS.dll
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CDSDK.dll
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCED PD-2400.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCED PD-3000.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCED PD-4000.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCED PD-4800.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCED PD-6000.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCEDPD2400COM.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCEDPD3000COM.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCEDPD4000COM.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCEDPD4800COM.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ADVANCEDPD6000COM.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AIP0720.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AIP0800.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AIP1120.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AIP1360.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Allenda.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Allenda836.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AnaExpress.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ANAEXPRESS101E.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AnaExpressAE-60E.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AnaExpressAE-70.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\AnaExpressAE-75.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\APD ROUTER.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ARISAR20.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ARISAR50.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ARISAR75.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Aristo(HPGL).CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ARISTOAG130.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ArtCreation.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ArtSignAS1360.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ArtSignAS360.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ASY1360.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ASY360.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\ASY720.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BlackcatC.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BlackcatL.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BlackcatS.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BOBCAT.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BRIDGEC-24.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\BRIGEPRO.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CALCOMP1043.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CALCOMP1044.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CALCOMP1044GT.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Cameo.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CLIPPER.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CM200.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COMPACT-SIGN HC 751.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COMPACT-SIGN HF 1201.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COMPACT-SIGN HF 1202.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Copam.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COPAMCP2500.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COPAMCP4050.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COTEKCTK1100C.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COTEKCTK1350C.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COTEKCTK360C.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COTEKCTK720C.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COTEKCTK870C.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COUGARPLUS.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\COUGARPRO.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CraftRobo.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CREATIONPCUTCB730.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CREATIONPCUTCSB.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CREATIVECUTTERPRO.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CRPRO6000.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CSR4R466.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CSR7R700.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CSRTURBO.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Cutok DC240.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\Cutok DC330.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\CX 280.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DAISYCUT.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DESIGNTECH60.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DESIGNTECH60USB.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-100.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-130.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-150.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-40.cfg
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-60.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-70.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DGI OMEGA OM-80.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA C-12.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA C-24.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA C-48.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA DK1350.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA DK1700.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DIKA DK720.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DING SC1260.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DING SC630.CFG
  • C:\Program Files (x86)\SignMax\WinPCSIGN Basic 2012\CFG\DMPL.cfg

Usually the following registry keys will not be uninstalled:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\36B6CC7858DD406418252B45D596573A
  • HKEY_LOCAL_MACHINE\Software\SignMax\WinPCSIGN Basic 2012

Registry values that are not removed from your computer:
  • HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\36B6CC7858DD406418252B45D596573A\ProductName




A way to uninstall WinPCSIGN Basic 2012 using Advanced Uninstaller PRO

WinPCSIGN Basic 2012 is a program by SignMax. Sometimes, users try to uninstall this program. This can be easier said than done because deleting this manually requires some experience related to removing Windows programs manually. The best SIMPLE way to uninstall WinPCSIGN Basic 2012 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:

1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and all around tool to maximize the performance of your PC.

DOWNLOAD NOW

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire the program's interface and number of tools available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools category
Go to General Tools


4. Click on the Uninstall Programs tool
Go to Uninstall Programs


5. A list of the programs existing on your computer will appear

6. Scroll the list of programs until you find WinPCSIGN Basic 2012 or simply click the Search field and type in "WinPCSIGN Basic 2012". If it exists on your system the WinPCSIGN Basic 2012 application will be found very quickly. After you select WinPCSIGN Basic 2012 in the list , some data regarding the application is available to you:


  • Safety rating (in the left lower corner). The star rating tells you the opinion other users have regarding WinPCSIGN Basic 2012, from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Details regarding the program you want to uninstall, by pressing the Properties button.
For instance you can see that for WinPCSIGN Basic 2012:


  • The software company is: http://www.signmax.us
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{78ABD478-3EAF-4CFE-BA62-B5CD5143F922}\setup.exe -runfromtemp -l0x0009 -removeonly
7. Click the Uninstall button. A confirmation dialog will come up. Confirm the removal by clicking Uninstall. Advanced Uninstaller PRO will automatically remove WinPCSIGN Basic 2012.
Uninstall WinPCSIGN Basic 2012


8. After removing WinPCSIGN Basic 2012, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to perform the cleanup. All the items that belong WinPCSIGN Basic 2012 that have been left behind will be found and you will be able to delete them. By removing WinPCSIGN Basic 2012 with Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your computer.

Your system will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW

Geographical user distribution

  • Windows 7 (6.1)
  • 10.0
  • Windows XP (5.1)
  • Windows 8.1 (6.3)
Software Application


Disclaimer

This page is not a recommendation to uninstall WinPCSIGN Basic 2012 by SignMax from your computer, nor are we saying that WinPCSIGN Basic 2012 by SignMax is not a good application. This page simply contains detailed info on how to uninstall WinPCSIGN Basic 2012 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2016-09-21 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2016-09-21 06:25:25.207