User Management Component

A way to uninstall User Management Component from your PC

This page contains complete information on how to remove User Management Component for Windows. It was coded for Windows by Siemens AG. Take a look here for more details on Siemens AG. You can see more info on User Management Component at http://www.siemens.com/automation/service&support. Usually the User Management Component program is placed in the C:\Program Files\Siemens\Automation\UserManagement directory, depending on the user's option during setup. The full command line for removing User Management Component is C:\Program. Keep in mind that if you will type this command in Start / Run Note you might get a notification for administrator rights. User Management Component's primary file takes about 465.34 KB (476512 bytes) and is named IPCSecCom.exe.

User Management Component installs the following the executables on your PC, taking about 32.04 MB (33596992 bytes) on disk.

• IPCSecCom.exe (465.34 KB)
• tia_111a_openssl.exe (539.84 KB)
• um.ELGSrv.exe (576.84 KB)
• um.ess.exe (716.84 KB)
• um.ffsyssrv.exe (351.34 KB)
• um.jei.exe (813.84 KB)
• um.kei.exe (321.34 KB)
• um.piisrv.exe (695.84 KB)
• um.PostSetup64.exe (77.34 KB)
• um.RACRMSRV.exe (782.34 KB)
• um.ring.exe (955.84 KB)
• um.Ris.exe (1.08 MB)
• um.server.exe (2.02 MB)
• um.sso.exe (1.03 MB)
• um.ssrem.exe (831.34 KB)
• UMConf.exe (1.28 MB)
• UMCService.exe (333.34 KB)
• UMX.exe (619.84 KB)
• UPService.exe (192.84 KB)
• node.exe (16.84 MB)
• tia_111a_openssl.exe (480.84 KB)
• um.ess32.exe (657.34 KB)
• UMConf.exe (619.84 KB)

...click to view all...

The current web page applies to User Management Component version 16.0 only. For other User Management Component versions please click below:

• 15.14
• 15.0
• 15.15
• 19.0
• 16.06
• 2.1220
• 16.04
• 2.92
• 2.1102
• 2.1310
• 20.0
• 1.916
• 2.93
• 01.09.00.00
• 2.71
• 2.1000
• 2.1210
• 17.0
• 15.1
• 01.09.01.03
• 16.02
• 1.915
• 2.932
• 2.7
• 2.94
• 2.1200
• 18.0
• 2.1500
• 2.1120

...click to view all...
If you are manually uninstalling User Management Component we advise you to verify if the following data is left behind on your PC.

Folders remaining:

• C:\Program Files\Siemens\Automation\UserManagement

The files below remain on your disk when you remove User Management Component:

• C:\Program Files\Siemens\Automation\UserManagement\BIN\cpprest140_2_6.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\IdP_WebUI_configurator.bat
• C:\Program Files\Siemens\Automation\UserManagement\BIN\IPCSCHlp64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\IPCSecCom.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\platforms\qwindows.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\PluginDesign.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\REMOVE_IdP_WebUI_configuration.bat
• C:\Program Files\Siemens\Automation\UserManagement\BIN\Secon_UMC.xml
• C:\Program Files\Siemens\Automation\UserManagement\BIN\Siemens.UMC.ImportUser.ps1
• C:\Program Files\Siemens\Automation\UserManagement\BIN\SLUM_API64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\TCSS_RAC_Adapter_Client_Configuration.ps1
• C:\Program Files\Siemens\Automation\UserManagement\BIN\TCSS_RAC_Adapter_Server_Configuration.ps1
• C:\Program Files\Siemens\Automation\UserManagement\BIN\TCSS_Web_Adapter_Server_Configuration.ps1
• C:\Program Files\Siemens\Automation\UserManagement\BIN\Teamcenter_SSO64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\Teamcenter_SSOloader.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\TeamcenterPlugin.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\tia_111a_libcrypto64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\tia_111a_libssl64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\tia_111a_openssl.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.Atbhmi64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.atbipc64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.bckprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.broker64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.CbCrash64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.CBMLIB64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.CDKClass64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UM.CDKLIB64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.certlib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.CUBEHEAP64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.diagprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.discovery64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.DLLDEB64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.DSM64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ELGCli64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.elgsdk64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ELGSrv.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.elprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ess.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.fdblib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ffsyslib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ffsyssrv.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.FMCInfoM64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.fmcprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.FNDLANGUAGE64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.gpclib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.gpslib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.hcservice64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.healthprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.iowatraceprv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.jei.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.join64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.kei.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.OBCL64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.pii64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.piisrv.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.plugin_prv64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.PluginDevice.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.PostSetup64.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.prg64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.quelib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ra.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ra_b.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.racapi64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACAPP64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACCO64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UM.RACCustResMap64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACDLL64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.racfdb64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACGroupMap64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACLGN64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UM.RACMap64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACRMSRV.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.RACSYSDBWRP64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.restclient.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ring.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.Ris.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.rqmlib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.scrmin64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.SecurityClaimContext64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.serlib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.server.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.SITCRPT64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.SLogon64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.slvm_b64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.slvm64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.SQULIB64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.sso.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.sso_web.node
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.ssrem.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\um.TSHLib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UMConf.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UMCService.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UMX.exe
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UnWinderLib64.dll
• C:\Program Files\Siemens\Automation\UserManagement\BIN\UPService.exe
• C:\Program Files\Siemens\Automation\UserManagement\Documentation\UMC_FederationAdapterDeveloperManual.pdf
• C:\Program Files\Siemens\Automation\UserManagement\Documentation\UMC_InstallationManual.pdf
• C:\Program Files\Siemens\Automation\UserManagement\Documentation\UMC_Release_Notes.pdf
• C:\Program Files\Siemens\Automation\UserManagement\Documentation\UMC_SecurityConcept.pdf
• C:\Program Files\Siemens\Automation\UserManagement\Documentation\UMC_ServiceLayerAPIDeveloperManual.pdf

Use regedit.exe to manually remove from the Windows Registry the keys below:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\52FE4481F7584004E92B0BA69CB5C372
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Siemens Installer Assistant - UMC64

Additional registry values that you should clean:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\52FE4481F7584004E92B0BA69CB5C372\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\UMC Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\umscsvc\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\UP Service\ImagePath

How to delete User Management Component with the help of Advanced Uninstaller PRO

User Management Component is an application released by Siemens AG. Some computer users want to erase this application. Sometimes this is easier said than done because deleting this by hand takes some skill regarding Windows internal functioning. The best SIMPLE way to erase User Management Component is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to maximize the performance of your Windows computer.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with the program's interface and number of features available. Advanced Uninstaller PRO is a very useful PC management program.

3. Click on the General Tools category


4. Activate the Uninstall Programs tool


5. All the applications installed on the computer will be shown to you

6. Scroll the list of applications until you locate User Management Component or simply activate the Search feature and type in "User Management Component". If it is installed on your PC the User Management Component program will be found very quickly. Notice that after you click User Management Component in the list of programs, the following data regarding the program is available to you:

• Star rating (in the left lower corner). This explains the opinion other users have regarding User Management Component, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Technical information regarding the program you wish to remove, by pressing the Properties button.

For example you can see that for User Management Component:

• The software company is: http://www.siemens.com/automation/service&support
• The uninstall string is: C:\Program

7. Press the Uninstall button. A window asking you to confirm will come up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically uninstall User Management Component.


8. After uninstalling User Management Component, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to perform the cleanup. All the items that belong User Management Component that have been left behind will be found and you will be able to delete them. By uninstalling User Management Component using Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your disk.

Your computer will remain clean, speedy and ready to run without errors or problems.

Disclaimer

This page is not a recommendation to uninstall User Management Component by Siemens AG from your PC, nor are we saying that User Management Component by Siemens AG is not a good software application. This text simply contains detailed instructions on how to uninstall User Management Component in case you want to. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.