Ulead COOL 3D Studio SE

A guide to uninstall Ulead COOL 3D Studio SE from your system

This page contains detailed information on how to uninstall Ulead COOL 3D Studio SE for Windows. It is produced by Ulead Systems. You can read more on Ulead Systems or check for application updates here. Ulead COOL 3D Studio SE is typically set up in the C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE folder, subject to the user's option. The full command line for removing Ulead COOL 3D Studio SE is RunDll32. Note that if you will type this command in Start / Run Note you may get a notification for administrator rights. Ulead COOL 3D Studio SE's primary file takes around 1.78 MB (1863680 bytes) and its name is u3dedit4.exe.

Ulead COOL 3D Studio SE is composed of the following executables which occupy 1.82 MB (1904640 bytes) on disk:

• u3dedit4.exe (1.78 MB)
• ufpc3d40.exe (40.00 KB)

The current web page applies to Ulead COOL 3D Studio SE version 1.0 alone. Following the uninstall process, the application leaves leftovers on the PC. Part_A few of these are shown below.

You should delete the folders below after you uninstall Ulead COOL 3D Studio SE:

• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE
• C:\Users\%user%\AppData\Local\VirtualStore\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE

Files remaining:

• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Satellite\Satel000.BMP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Satellite\Satel001.BMP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Satellite\satellite.3DS
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Violin\Violi000.BMP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Violin\Violi001.BMP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Violin\Violi002.BMP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\3DSfiles\Violin\Violin.3DS
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\aemath.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\aematrix.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\C3DBump.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\c3dcone240.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\C3DFrustum40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\c3dmsg.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\c3ds_manual.pdf
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\c3dshape40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\C3DSHAPE40.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\C3dSubdivide.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\C3DTorus40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\DB.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\EFF.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\fun_ball.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\IJG.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Audio\PAS1_J13.wav
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Audio\PAS2_J05.wav
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Audio\PAS5_J08.wav
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Audio\PAS5_J11.wav
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Audio\PAS6_J18.wav
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav11_14.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav11_4.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav13_10.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav15_4.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav17_9.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav21_12.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav21_8.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\pav21_9.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\ss1_009.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\ss1_021.avi
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Materials\Video\Thumbs.db
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\OPASMgr.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Pal.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\PluginReg.ini
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\PLUGINS.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3DBEND40.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend40.up2
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000001.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000001.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000002.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000002.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000003.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000003.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000004.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000004.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000005.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000005.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000006.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000006.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000007.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000007.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000008.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000008.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000009.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000009.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000010.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Bend\C3dBend4000010.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\C3DBOARD40.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard40.up2
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000001.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000001.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000002.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000002.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000003.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000003.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000004.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000004.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000005.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000005.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000006.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000006.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000007.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000007.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000008.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000008.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000009.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000009.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000010.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Board\c3dboard4000010.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel40.dll
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBEVEL40.HLP
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel40.up2
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000001.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000001.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000002.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000002.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000003.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000003.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000004.ucd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000004.upd
• C:\Program Files (x86)\Ulead Systems\Ulead COOL 3D Studio SE\Plugins\Custom Bevel\C3DUSDBevel4000005.ucd

You will find in the Windows Registry that the following data will not be cleaned; remove them one by one using regedit.exe:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{A09A8701-451C-4DB3-89CB-BFA38224A097}

How to uninstall Ulead COOL 3D Studio SE with the help of Advanced Uninstaller PRO

Ulead COOL 3D Studio SE is an application released by the software company Ulead Systems. Some computer users decide to uninstall this program. This is difficult because deleting this manually takes some know-how regarding Windows internal functioning. The best QUICK practice to uninstall Ulead COOL 3D Studio SE is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, install it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and all around tool to maximize the performance of your PC.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire Advanced Uninstaller PRO's interface and wealth of functions available. Advanced Uninstaller PRO is a very good system optimizer.

3. Click on the General Tools button


4. Click on the Uninstall Programs tool


5. A list of the applications installed on your computer will be made available to you

6. Scroll the list of applications until you find Ulead COOL 3D Studio SE or simply activate the Search feature and type in "Ulead COOL 3D Studio SE". If it is installed on your PC the Ulead COOL 3D Studio SE application will be found automatically. Notice that after you click Ulead COOL 3D Studio SE in the list of applications, the following information regarding the application is made available to you:

• Star rating (in the lower left corner). This tells you the opinion other users have regarding Ulead COOL 3D Studio SE, from "Highly recommended" to "Very dangerous".
• Opinions by other users - Click on the Read reviews button.
• Technical information regarding the application you wish to remove, by clicking on the Properties button.

7. Click the Uninstall button. A confirmation window will appear. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then remove Ulead COOL 3D Studio SE.


8. After uninstalling Ulead COOL 3D Studio SE, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to perform the cleanup. All the items of Ulead COOL 3D Studio SE that have been left behind will be found and you will be able to delete them. By removing Ulead COOL 3D Studio SE using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your system.

Your Windows PC will remain clean, speedy and ready to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to uninstall Ulead COOL 3D Studio SE by Ulead Systems from your computer, we are not saying that Ulead COOL 3D Studio SE by Ulead Systems is not a good software application. This page simply contains detailed info on how to uninstall Ulead COOL 3D Studio SE supposing you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.