Publishers

Thermolib 5.4.0 Thermolib 5.4.0





A way to uninstall Thermolib 5.4.0 from your computer

Thermolib 5.4.0 is a computer program. This page holds details on how to uninstall it from your PC. It is developed by EUtech Scientific Engineering GmbH. You can find out more on EUtech Scientific Engineering GmbH or check for application updates here. Click on to get more details about Thermolib 5.4.0 on EUtech Scientific Engineering GmbH's website. Thermolib 5.4.0 is commonly installed in the C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0 folder, but this location may vary a lot depending on the user's choice while installing the application. The full command line for removing Thermolib 5.4.0 is C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\uninstall.exe. Keep in mind that if you will type this command in Start / Run Note you may get a notification for admin rights. SoftwareActivation.exe is the Thermolib 5.4.0's main executable file and it occupies circa 549.00 KB (562176 bytes) on disk.

The executable files below are installed together with Thermolib 5.4.0. They occupy about 1.86 MB (1950720 bytes) on disk.

  • uninstall.exe (1.32 MB)
  • SoftwareActivation.exe (549.00 KB)


The information on this page is only about version 5.4.0.7262 of Thermolib 5.4.0. If planning to uninstall Thermolib 5.4.0 you should check if the following data is left behind on your PC.

Folders left behind when you uninstall Thermolib 5.4.0:
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0

Check for and remove the following files from your disk when you uninstall Thermolib 5.4.0:
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\th_CheckInstallation.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\th_CheckInstallation.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_GetPaths.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_GetPaths.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Open.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Open.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Setup.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Setup.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Uninstall.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Uninstall.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Version.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Thermolib_Version.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Bin\Version.txt
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\Bitmap.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\Contents.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\fc_PlotPressureSteps.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\rtwmakecfg.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\slblocks.m
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_Density_S.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_functions.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_Nasa_Liquid_S.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_Nasa_S.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_TpVaporFractions_S.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\targets\nidll\RTW_7.0\VC98\fc_TpxState_S.obj
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_BalanceS.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Density_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Density_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_ErrorDisplay.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_FlowDisplay_2.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_HpStateHeatExchange_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_HpStateHeatExchange_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Indicator.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_LibInternal.slx
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Nasa_Liquid_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Nasa_Liquid_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Nasa_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_Nasa_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SaturationPressure_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SaturationPressure_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SaturationTemperature_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SaturationTemperature_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SimStepSize_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SimStepSize_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SpState_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_SpState_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_StatePlot_S.p
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TpVaporFractions_PR_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TpVaporFractions_PR_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TpxState_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TpxState_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TrhoState_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_TrhoState_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_UrhoState_S.mexw32
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\th_UrhoState_S.mexw64
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\Thermolib.slx
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_BalanceS.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_Density_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_FlowDisplay_2.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_HpStateHeatExchange_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_Nasa_Liquid_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_Nasa_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_SaturationPressure_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_SaturationTemperature_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_SimStepSize_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_SpState_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_TpVaporFractions_PR_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_TpxState_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_TrhoState_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\blocks\tlc_c\th_UrhoState_S.tlc
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Compatibility\FClib4184.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Compatibility\FClibEmpty.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\BalanceTemplate.xls
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\ChemicalMediaData.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\ChemicalMediaData.xls
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\ComponentData.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\ComponentData.xls
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\ComponentsDatabase.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\Constants.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\Example_ComponentData.xls
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\FlowBus.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\LinksVersion3-2-4-1.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\LinksVersion3-3-2-6.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\LinksVersion4-0-3-4.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\LinksVersion4-1-2-0.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\Makros.xla
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\nasadat.htm
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\NasaGuide.htm
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\SensorBus.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\StateBus.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\SteamTable_dh_IG.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\UnitDefinition.mat
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Data\UnitDefinition.xls
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoAirConditioner.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoAirRefrigeration.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoCombinedCyclePowerPlant.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoElectricVehicle.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoGasTurbine.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoHeatPump.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoHeatPumpNH3.mdl
  • C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\Examples\Applications\DemoHeatPumpPressureFeedback.mdl

Use regedit.exe to manually remove from the Windows Registry the data below:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Thermolib5.4.0

Additional registry values that you should delete:
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2793064765-158144947-2540177924-1001\\Device\HarddiskVolume4\Program Files (x86)\EUtech SE\Thermolib\5.4.0\uninstall.exe


How to remove Thermolib 5.4.0 from your PC with Advanced Uninstaller PRO

Thermolib 5.4.0 is an application by the software company EUtech Scientific Engineering GmbH. Some people decide to remove it. Sometimes this is hard because uninstalling this by hand requires some skill regarding Windows program uninstallation. The best QUICK manner to remove Thermolib 5.4.0 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, add it. This is good because Advanced Uninstaller PRO is the best uninstaller and all around tool to maximize the performance of your computer.

DOWNLOAD NOW

  • go to Download Link
  • download the program by pressing the DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's design and wealth of features available. Advanced Uninstaller PRO is a very useful program.

3. Click on the General Tools category
Go to General Tools


4. Activate the Uninstall Programs button
Go to Uninstall Programs


5. A list of the programs existing on your computer will appear

6. Navigate the list of programs until you locate Thermolib 5.4.0 or simply activate the Search field and type in "Thermolib 5.4.0". If it exists on your system the Thermolib 5.4.0 program will be found very quickly. Notice that when you select Thermolib 5.4.0 in the list of applications, some data regarding the program is available to you:


  • Safety rating (in the left lower corner). This explains the opinion other users have regarding Thermolib 5.4.0, from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Click on the Read reviews button.
  • Technical information regarding the app you want to uninstall, by pressing the Properties button.
For instance you can see that for Thermolib 5.4.0:





  • The publisher is: http://www.eutech-scientific.de
  • The uninstall string is: C:\Program Files (x86)\EUtech SE\Thermolib\5.4.0\uninstall.exe
7. Press the Uninstall button. A window asking you to confirm will appear. accept the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will then remove Thermolib 5.4.0.
Uninstall Thermolib 5.4.0


8. After uninstalling Thermolib 5.4.0, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to go ahead with the cleanup. All the items that belong Thermolib 5.4.0 that have been left behind will be found and you will be asked if you want to delete them. By removing Thermolib 5.4.0 using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your system.

Your Windows PC will remain clean, speedy and able to run without errors or problems.

DOWNLOAD NOW


Disclaimer

This page is not a recommendation to uninstall Thermolib 5.4.0 by EUtech Scientific Engineering GmbH from your PC, nor are we saying that Thermolib 5.4.0 by EUtech Scientific Engineering GmbH is not a good application. This text simply contains detailed info on how to uninstall Thermolib 5.4.0 in case you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2017-02-10 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2017-02-10 04:58:44.967