Tekla Structures 20.1 SR3 x64

How to uninstall Tekla Structures 20.1 SR3 x64 from your PC

This web page is about Tekla Structures 20.1 SR3 x64 for Windows. Below you can find details on how to uninstall it from your PC. It was created for Windows by Tekla Corporation. More information on Tekla Corporation can be seen here. More info about the application Tekla Structures 20.1 SR3 x64 can be found at http://www.Tekla.com. Tekla Structures 20.1 SR3 x64 is normally installed in the C:\Program Files\Tekla Structures folder, subject to the user's option. The full command line for removing Tekla Structures 20.1 SR3 x64 is MsiExec.exe /X{C587A3F1-58F3-46D2-9702-A5F97B639181}. Keep in mind that if you will type this command in Start / Run Note you might receive a notification for admin rights. Tekla Structures 20.1 SR3 x64's primary file takes about 110.35 KB (113000 bytes) and is named tekla_dstv2dxf.exe.

The following executables are installed beside Tekla Structures 20.1 SR3 x64. They take about 121.74 MB (127658072 bytes) on disk.

• albion.exe (1.89 MB)
• ayrshire.exe (1.73 MB)
• cold_rolled.exe (2.97 MB)
• concrete1.exe (2.97 MB)
• concrete2.exe (2.65 MB)
• concrete3.exe (2.59 MB)
• elematic.exe (1.01 MB)
• export.exe (940.93 KB)
• hispan.exe (1.71 MB)
• kingspan.exe (1.86 MB)
• metl-con.exe (2.31 MB)
• metsec.exe (1.87 MB)
• reid.exe (1.83 MB)
• Steel1.exe (13.43 MB)
• steel2.exe (1.57 MB)
• steel3.exe (3.46 MB)
• steel4.exe (2.65 MB)
• steel5.exe (2.24 MB)
• steel6.exe (1.15 MB)
• steelSections.exe (1.69 MB)
• tower.exe (1.09 MB)
• ultrazed.exe (1.99 MB)
• unitechnik.exe (1.76 MB)
• HelpViewer.exe (367.43 KB)
• msxsl.exe (24.31 KB)
• ReferenceModelImportConfiguration.exe (41.93 KB)
• Run.exe (42.43 KB)
• StartTemplateEditor.exe (98.93 KB)
• symed.exe (19.84 MB)
• TeklaStructures.exe (10.87 MB)
• xs_cancel.exe (22.43 KB)
• Floatie.exe (515.93 KB)
• AddSurfaceSymbols.exe (90.43 KB)
• CutLines.exe (90.93 KB)
• DefineMasterDrawing.exe (29.93 KB)
• DrawingAttributesConverter.exe (1.16 MB)
• Drawingtools.exe (79.93 KB)
• MasterDrawingCatalog.exe (31.43 KB)
• MomentConnectionSymbol.exe (93.43 KB)
• NodeAlignment.exe (117.43 KB)
• RebarLayeringMarker.exe (288.93 KB)
• RebarMeshViewCreator.exe (103.93 KB)
• SideSymbolsNumerical.exe (42.93 KB)
• SketchReports.exe (125.43 KB)
• TSDrawingTools.exe (86.93 KB)
• MultiPurposeDimensioning.exe (154.93 KB)
• MigrationWizard.exe (257.43 KB)
• AutomaticSplicingTool.exe (279.43 KB)
• ClashCheckManager.exe (337.43 KB)
• ContinuousBeamReinforcement.exe (3.64 MB)
• CopyGADrawing.exe (57.93 KB)
• CustomComponentDialogEditor.exe (349.43 KB)
• CustomInquiry.exe (200.43 KB)
• ExportSketchUp.exe (121.93 KB)
• HMSExport.exe (150.43 KB)
• ImportFromTeklaBIMsight.exe (126.43 KB)
• LayoutManager.exe (1.19 MB)
• NumberingSettingsByPhase.exe (92.93 KB)
• PDFReferenceModel.exe (81.43 KB)
• PropertySetDefinitions.exe (199.43 KB)
• Publish_to_Tekla_BIMsight.exe (131.43 KB)
• RebarClassificator.exe (71.43 KB)
• RebarShapeManager.exe (177.43 KB)
• SaveAsModelTemplate.exe (82.43 KB)
• Steps.exe (38.93 KB)
• Tube.NC.Export.exe (126.93 KB)
• DesignGroupNumbering.exe (125.93 KB)
• FontSetup.exe (25.93 KB)
• ObjectBrowser.exe (20.43 KB)
• DirectoryBrowser.exe (118.43 KB)
• SupportTool.exe (179.43 KB)
• cachegen.exe (139.43 KB)
• clashcheckldr.exe (42.93 KB)
• clashcheckworker_loader.exe (14.93 KB)
• ifcpluginworker_loader.exe (13.93 KB)
• importloader-150.exe (17.43 KB)
• importloader.exe (14.93 KB)
• webviewerpluginworker_loader.exe (14.93 KB)
• tekla_dstv2dxf.exe (110.35 KB)
• dwgviewer.exe (382.34 KB)
• installanchorservice.exe (157.37 KB)
• uninstallanchorservice.exe (157.37 KB)
• installanchorservice.exe (147.37 KB)
• uninstallanchorservice.exe (147.87 KB)
• convtemplate.exe (1.97 MB)
• StartTemplateEditor.exe (98.93 KB)
• tpled.exe (18.65 MB)

...click to view all...

The information on this page is only about version 201.0.103.0 of Tekla Structures 20.1 SR3 x64. If you are manually uninstalling Tekla Structures 20.1 SR3 x64 we suggest you to check if the following data is left behind on your PC.

Folders remaining:

• C:\Program Files\Tekla Structures

The files below are left behind on your disk when you remove Tekla Structures 20.1 SR3 x64:

• C:\Program Files\Tekla Structures\20.1\applications\albion\albion.exe
• C:\Program Files\Tekla Structures\20.1\applications\albion\albion.inp
• C:\Program Files\Tekla Structures\20.1\applications\albion\albion_resources.dll
• C:\Program Files\Tekla Structures\20.1\applications\albion\application.inp
• C:\Program Files\Tekla Structures\20.1\applications\applications.inp
• C:\Program Files\Tekla Structures\20.1\applications\ayrshire\application.inp
• C:\Program Files\Tekla Structures\20.1\applications\ayrshire\ayrshire.exe
• C:\Program Files\Tekla Structures\20.1\applications\ayrshire\ayrshire.inp
• C:\Program Files\Tekla Structures\20.1\applications\ayrshire\ayrshire_resources.dll
• C:\Program Files\Tekla Structures\20.1\applications\bw\application.inp
• C:\Program Files\Tekla Structures\20.1\applications\bw\bw.inp
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\albion_cc.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\albion_hcss.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\albion_restraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\ALBION_SIGMARestraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Albionstandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\AlbionTrans.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\AlbionZsleeve.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\AntiSag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\application.inp
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Ayrshirestandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\AyrshireTrans.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Backmarks
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\beam.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\BlindBolt.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\boltdiam.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\brloc.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\brnam.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\BW_restraint2.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\BW_siderail.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Cleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\cold_rolled.exe
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\cold_rolled.inp
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\cold_rolled_resources.dll
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\COMMON.chm
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\EavesStanchion.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\EavesStanchion1.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\EBCCleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\ExtendedFirewall.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\FIREWALL.DAT
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\FirewallCleats.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\FlatAntiSag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\FlatRoof.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\HEndBay.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\hispan_restraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Hispanstandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\HispanTrans.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\HisZCleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\HorizontalCladding.xml
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\iendbay.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\King-EavesStanchion.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\King-EavesStanchion1.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\kingflatantisag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\kingk_antisag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\kingp_antisag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\KingSpanReport.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\KingSpanstandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\KingSpanTran.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\KingSpanTransfer.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\King-TiledRoof.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Metlcon_Siderail.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\MetlconHCSleeve.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\METL-CONreport.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\METL-CONTransfer.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\METL-CONtranssize.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsec_antisag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsec_antisagbutt.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsec_restraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsec_roof.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsec_siderail.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\MetsecCleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\MetsecPJRClearances.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsecreport.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsecstandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\metsectransfer.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\MezzanineFloor.edat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\MezzanineFloorMetsec.edat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\NormRoof.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\overlap.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\purlin_ties.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\pypbs.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\ReidCleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\ReidTrans.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Sizes.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\specpurlin.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Stay.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\stead_restraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Steadmans_siderail.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\steelSections_antisag.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\steelSections_antisagbutt.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\steelSections_restraint.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\steelSections_siderail.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\SteelSectionsCleat.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\steelSectionsstandard.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Stiffener.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\strbolt.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Strut.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\Stub.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\TiledRoof.dat
• C:\Program Files\Tekla Structures\20.1\applications\cold_rolled\ULTRA_PCR.dat

Registry that is not uninstalled:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Tekla Structures|20.1|nt|bin|HelpViewer.exe
• HKEY_CLASSES_ROOT\Tekla.Structures.AssertTraceListener
• HKEY_CLASSES_ROOT\Tekla.Structures.ClashCheckOptions
• HKEY_CLASSES_ROOT\Tekla.Structures.ComponentOptions
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.AlongLineOrWithLeaderLineAndParentObjectAlongPartPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.AlongLineOrWithLeaderLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.AlongLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.AlongPartCenteredPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.AngleDimensionAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Arc+ArcAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ArrowheadAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.BaseLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.BaseLineWithArrowAtEndPointPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.BaseLineWithArrowAtStartPointPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Bolt+BoltAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CannotGetAttributeForPluginDueToInexistantFieldException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CannotGetAttributeForPluginException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CannotSetAttributeForPluginDueToInexistantFieldException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CannotSetAttributeForPluginException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Circle+CircleAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Cloud+CloudAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ContainerElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CurvedDimensionSetHandler
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CurvedDimensionSetOrthogonal+CurvedDimensionSetOrthogonalAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.CurvedDimensionSetRadial+CurvedDimensionSetRadialAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DetailMark+DetailMarkAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DetailMarkSymbolAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DetailMarkTagsAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DimensionSetBaseAttributes+CombinedDimensionAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DimensionSetBaseAttributes+DimensionFormatAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DimensionSetBaseAttributes+DimensionPlacingAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DimensionSetBaseAttributes+DimensionTextAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DrawingHandler
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.DrawingObject+NoAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.EdgeChamfer+EdgeChamferAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.EmbeddedObjectAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Events
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.FontAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.GADrawing
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Grid+GridAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.GridLine+GridLabel
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.GridLine+GridLineAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.InsidePartAlongPartOrWithLeaderLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.InsidePartAlongPartPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.InsidePartHorizontalOrWithLeaderLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.InsidePartHorizontalPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.IntList
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.InvalidPluginPickerInputException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LayoutAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LeaderLineAndParentObjectAlongPartPlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LeaderLinePlacingType
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Line+LineAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LineTypeAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LinkAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.LinkFrameAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.MarkSet+MarkSetAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.NewLineElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Part+PartAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PickerInputInterrupt
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PickerInterruptedException
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PlacingAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PlacingDirectionAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PlacingDistanceAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PlacingQuarterAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PluginPickerInput
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PointList
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PointPlacing
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Polygon+PolygonAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Polyline+PolylineAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PourBreak+PourBreakAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.PrintAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.RadiusDimensionAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Rectangle+RectangleAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReferenceModel+ReferenceModelAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReinforcementBase+ReinforcementGroupAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReinforcementBase+ReinforcementMeshAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReinforcementBase+ReinforcementSingleAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReinforcementBase+ReinforcementStrandAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReinforcementPulloutElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.ReportTemplateElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SectionMarkBase+SectionMarkAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SectionMarkBase+SectionMarkSymbol
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SectionMarkBase+SectionMarkTagAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SectionMarkBase+SectionMarkTagsAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Size
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SpaceElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.StraightDimension+StraightDimensionAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.StraightDimensionSet+StraightDimensionSetAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.StraightDimensionSetHandler
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.StringList
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Surfacing+SurfacingAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Symbol+SymbolAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SymbolElement
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.SymbolInfo
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.TemplateInfo
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Text+TextAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.TextFile+TextFileAttributes
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Tools.DrawingCoordinateConverter
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.Tools.InputDefinitionFactory
• HKEY_CLASSES_ROOT\Tekla.Structures.Drawing.UI.Events

Registry values that are not removed from your PC:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\1F3A785C3F852D6479205A9FB7361918\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\349DFD8375DD1BD4DB01BBA6417EA6CE\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Tekla Structures\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\WINDOWS\Installer\{C587A3F1-58F3-46D2-9702-A5F97B639181}\

A way to uninstall Tekla Structures 20.1 SR3 x64 from your PC with Advanced Uninstaller PRO

Tekla Structures 20.1 SR3 x64 is an application released by the software company Tekla Corporation. Frequently, users try to remove this application. This is troublesome because removing this by hand takes some experience related to PCs. The best SIMPLE approach to remove Tekla Structures 20.1 SR3 x64 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and general utility to take care of your Windows system.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to get familiar with the program's interface and number of functions available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools button


4. Click on the Uninstall Programs feature


5. A list of the programs installed on your computer will appear

6. Navigate the list of programs until you find Tekla Structures 20.1 SR3 x64 or simply activate the Search feature and type in "Tekla Structures 20.1 SR3 x64". The Tekla Structures 20.1 SR3 x64 program will be found very quickly. When you select Tekla Structures 20.1 SR3 x64 in the list of applications, the following data about the program is available to you:

• Safety rating (in the lower left corner). This tells you the opinion other users have about Tekla Structures 20.1 SR3 x64, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details about the app you want to remove, by pressing the Properties button.

For instance you can see that for Tekla Structures 20.1 SR3 x64:

• The web site of the application is: http://www.Tekla.com
• The uninstall string is: MsiExec.exe /X{C587A3F1-58F3-46D2-9702-A5F97B639181}

7. Press the Uninstall button. A window asking you to confirm will appear. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically uninstall Tekla Structures 20.1 SR3 x64.


8. After uninstalling Tekla Structures 20.1 SR3 x64, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to go ahead with the cleanup. All the items that belong Tekla Structures 20.1 SR3 x64 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Tekla Structures 20.1 SR3 x64 using Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your PC.

Your system will remain clean, speedy and ready to serve you properly.

Geographical user distribution

Disclaimer

This page is not a piece of advice to remove Tekla Structures 20.1 SR3 x64 by Tekla Corporation from your computer, nor are we saying that Tekla Structures 20.1 SR3 x64 by Tekla Corporation is not a good application. This page simply contains detailed info on how to remove Tekla Structures 20.1 SR3 x64 supposing you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.