Tekla Structures 20.0 Extension: Drawing Break Lines

How to uninstall Tekla Structures 20.0 Extension: Drawing Break Lines from your PC

You can find below details on how to remove Tekla Structures 20.0 Extension: Drawing Break Lines for Windows. It was developed for Windows by Tekla Corporation. More information on Tekla Corporation can be seen here. More information about Tekla Structures 20.0 Extension: Drawing Break Lines can be seen at http://www.Tekla.com. Tekla Structures 20.0 Extension: Drawing Break Lines is frequently set up in the C:\Program Files\Tekla Structures\20.0 folder, however this location may vary a lot depending on the user's option when installing the application. The full command line for removing Tekla Structures 20.0 Extension: Drawing Break Lines is MsiExec.exe /X{3B6AF680-594A-47E8-8A5B-A4F737B15B57}. Keep in mind that if you will type this command in Start / Run Note you may get a notification for admin rights.

Tekla Structures 20.0 Extension: Drawing Break Lines is comprised of the following executables which take 100.37 MB (105245392 bytes) on disk:

• albion.exe (1.72 MB)
• ayrshire.exe (1.64 MB)
• cold_rolled.exe (2.18 MB)
• concrete1.exe (2.61 MB)
• concrete2.exe (2.58 MB)
• concrete3.exe (2.28 MB)
• elematic.exe (1.04 MB)
• export.exe (1.12 MB)
• hispan.exe (1.61 MB)
• kingspan.exe (1.72 MB)
• metl-con.exe (1.75 MB)
• metsec.exe (1.76 MB)
• reid.exe (1.71 MB)
• Steel1.exe (10.35 MB)
• steel2.exe (1.59 MB)
• steel3.exe (2.84 MB)
• steel4.exe (2.29 MB)
• steel5.exe (1.95 MB)
• steel6.exe (1.13 MB)
• steelSections.exe (1.61 MB)
• tower.exe (1.08 MB)
• ultrazed.exe (1.85 MB)
• unitechnik.exe (1.72 MB)
• HelpViewer.exe (367.80 KB)
• msxsl.exe (24.31 KB)
• ReferenceModelImportConfiguration.exe (42.30 KB)
• Run.exe (42.80 KB)
• symed.exe (19.83 MB)
• Tekla.Warehouse.WindowsService.exe (14.80 KB)
• TeklaStructures.exe (10.45 MB)
• xs_cancel.exe (23.30 KB)
• Floatie.exe (517.30 KB)
• AddSurfaceSymbols.exe (90.80 KB)
• CutLines.exe (91.30 KB)
• DefineMasterDrawing.exe (30.30 KB)
• DrawingAttributesConverter.exe (1.16 MB)
• DrawingSymbolManager.exe (304.59 KB)
• Drawingtools.exe (80.30 KB)
• ExtensionGallery.exe (106.00 KB)
• MasterDrawingCatalog.exe (31.80 KB)
• MomentConnectionSymbol.exe (93.80 KB)
• NeighborGridsAndCompassMarks.exe (120.50 KB)
• NodeAlignment.exe (117.30 KB)
• RebarLayeringMarker.exe (289.30 KB)
• RebarMeshViewCreator.exe (103.80 KB)
• SideSymbolsNumerical.exe (43.30 KB)
• SketchReports.exe (125.80 KB)
• TSDrawingTools.exe (87.30 KB)
• WeldMarkMerge.exe (58.50 KB)
• WeldPathDrawing.exe (104.50 KB)
• DefaultFont.exe (127.50 KB)
• MultiPurposeDimensioning.exe (156.30 KB)
• MigrationWizard.exe (257.80 KB)
• AnchorRodTools.exe (90.08 KB)
• AttachPartWizard.exe (56.50 KB)
• AutomaticSplicingTool.exe (295.30 KB)
• BasePlateApplicator.exe (123.59 KB)
• BraceDrawing.exe (83.50 KB)
• ClashCheckManager.exe (337.80 KB)
• ComponentVariableImporter.exe (169.60 KB)
• ContinuousBeamReinforcement.exe (3.64 MB)
• CopyGADrawing.exe (58.30 KB)
• CustomComponentDialogEditor.exe (349.80 KB)
• CustomInquiry.exe (200.80 KB)
• DetailManager.exe (3.47 MB)
• ErectionSequencer.exe (112.59 KB)
• ExportSketchUp.exe (105.80 KB)
• FabricationProcessOrganizer.exe (88.00 KB)
• GridLayoutTool.exe (117.58 KB)
• HMSExport.exe (150.30 KB)
• ImportFromTeklaBIMsight.exe (126.80 KB)
• LayoutManager.exe (1.19 MB)
• MeshCuttingList.exe (125.50 KB)
• ModelDimensions.exe (71.58 KB)
• NumberingSettingsByPhase.exe (93.30 KB)
• OffsetCheck.exe (68.50 KB)
• OffsetGeneration.exe (135.00 KB)
• OffsetGenerationManager.exe (242.50 KB)
• PDFReferenceModel.exe (81.80 KB)
• pdfwriter.exe (144.00 KB)
• PhaseNumbering.exe (61.08 KB)
• PropertySetDefinitions.exe (198.80 KB)
• PublishTo3DPDF.exe (79.50 KB)
• Publish_to_Tekla_BIMsight.exe (131.80 KB)
• RebarClassificator.exe (71.30 KB)
• RebarShapeManager.exe (177.80 KB)
• ReferenceModelScale.exe (55.59 KB)
• RFIManager.exe (448.57 KB)
• SaveAsModelTemplate.exe (82.80 KB)
• Steps.exe (39.30 KB)
• Tube.NC.Export.exe (127.30 KB)
• u3dexport.exe (352.50 KB)
• WeldPreparation.exe (104.58 KB)
• WorkPlaneManager.exe (74.00 KB)
• CommentTool.exe (314.34 KB)
• DesignGroupNumbering.exe (126.30 KB)
• ModelCheckerSuite.exe (192.00 KB)
• FontSetup.exe (26.30 KB)
• ObjectBrowser.exe (20.80 KB)
• CopyWeldProperties.exe (18.50 KB)
• EditPrimaryProperties.exe (129.00 KB)
• EditSecondaryProperties.exe (41.00 KB)
• EditVertexes.exe (17.00 KB)
• ExtendWeld.exe (15.50 KB)
• GroupWelds.exe (19.00 KB)
• JoinWelds.exe (20.50 KB)
• Modeling.exe (197.50 KB)
• SplitWeld.exe (20.00 KB)
• SwitchMainToSecondary.exe (15.00 KB)
• UngroupWelds.exe (14.50 KB)
• WeldingTools.exe (29.00 KB)
• DirectoryBrowser.exe (118.80 KB)
• SupportTool.exe (153.80 KB)
• Sandbox.exe (26.30 KB)
• cachegen.exe (139.80 KB)
• clashcheckldr.exe (43.30 KB)
• clashcheckworker_loader.exe (15.30 KB)
• ifcpluginworker_loader.exe (14.30 KB)
• importloader-150.exe (17.80 KB)
• importloader.exe (15.30 KB)

...click to view all...

This info is about Tekla Structures 20.0 Extension: Drawing Break Lines version 20.0.1 alone. Some files and registry entries are typically left behind when you remove Tekla Structures 20.0 Extension: Drawing Break Lines.

You should delete the folders below after you uninstall Tekla Structures 20.0 Extension: Drawing Break Lines:

• C:\TeklaStructures20\20.0

Check for and delete the following files from your disk when you uninstall Tekla Structures 20.0 Extension: Drawing Break Lines:

• C:\TeklaStructures20\20.0\applications\albion\albion.exe
• C:\TeklaStructures20\20.0\applications\albion\albion.inp
• C:\TeklaStructures20\20.0\applications\albion\albion_resources.dll
• C:\TeklaStructures20\20.0\applications\albion\application.inp
• C:\TeklaStructures20\20.0\applications\applications.inp
• C:\TeklaStructures20\20.0\applications\ayrshire\application.inp
• C:\TeklaStructures20\20.0\applications\ayrshire\ayrshire.exe
• C:\TeklaStructures20\20.0\applications\ayrshire\ayrshire.inp
• C:\TeklaStructures20\20.0\applications\ayrshire\ayrshire_resources.dll
• C:\TeklaStructures20\20.0\applications\bw\application.inp
• C:\TeklaStructures20\20.0\applications\bw\bw.inp
• C:\TeklaStructures20\20.0\applications\cold_rolled\albion_cc.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\albion_hcss.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\albion_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ALBION_SIGMARestraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Albionstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\AlbionTrans.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\AlbionZsleeve.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\AntiSag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\application.inp
• C:\TeklaStructures20\20.0\applications\cold_rolled\Ayrshirestandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\AyrshireTrans.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Backmarks
• C:\TeklaStructures20\20.0\applications\cold_rolled\beam.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\BlindBolt.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\boltdiam.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\brloc.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\brnam.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\BW_restraint2.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\BW_siderail.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Cleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\cold_rolled.exe
• C:\TeklaStructures20\20.0\applications\cold_rolled\cold_rolled.inp
• C:\TeklaStructures20\20.0\applications\cold_rolled\cold_rolled_resources.dll
• C:\TeklaStructures20\20.0\applications\cold_rolled\COMMON.chm
• C:\TeklaStructures20\20.0\applications\cold_rolled\EavesStanchion.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\EavesStanchion1.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\EBCCleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ExtendedFirewall.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\FIREWALL.DAT
• C:\TeklaStructures20\20.0\applications\cold_rolled\FirewallCleats.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\FlatAntiSag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\FlatRoof.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\HEndBay.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\hispan_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Hispanstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\HispanTrans.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\HisZCleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\HorizontalCladding.xml
• C:\TeklaStructures20\20.0\applications\cold_rolled\iendbay.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\King-EavesStanchion.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\King-EavesStanchion1.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\kingflatantisag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\kingk_antisag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\kingp_antisag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\KingSpanReport.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\KingSpanstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\KingSpanTran.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\KingSpanTransfer.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\King-TiledRoof.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\METL-CONreport.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\METL-CONTransfer.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\METL-CONtranssize.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsec_antisag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsec_antisagbutt.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsec_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsec_roof.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsec_siderail.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\MetsecCleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\MetsecPJRClearances.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsecreport.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsecstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\metsectransfer.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\MezzanineFloor.edat
• C:\TeklaStructures20\20.0\applications\cold_rolled\MezzanineFloorMetsec.edat
• C:\TeklaStructures20\20.0\applications\cold_rolled\NormRoof.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\overlap.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\purlin_ties.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\pypbs.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ReidCleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ReidTrans.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Sizes.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\specpurlin.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Stay.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\stead_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\steelSections_antisag.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\steelSections_antisagbutt.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\steelSections_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\steelSections_siderail.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\SteelSectionsCleat.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\steelSectionsstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Stiffener.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\strbolt.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Strut.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\Stub.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\TiledRoof.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ULTRA_PCR.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\ultra_restraint.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\UltraZedstandard.dat
• C:\TeklaStructures20\20.0\applications\cold_rolled\UltraZedTrans.dat

Generally the following registry data will not be uninstalled:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures20|20.0|nt|bin|HelpViewer.exe
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{3B6AF680-594A-47E8-8A5B-A4F737B15B57}

Additional values that you should clean:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures20\20.0\applications\steel1\Steel1.exe
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures20\20.0\applications\steel3\steel3.exe
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures20\20.0\nt\bin\HelpViewer.exe
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures20\20.0\nt\bin\TeklaStructures.exe
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures20\20.0\nt\TplEd\tpled.exe
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\TeklaStructures20\20.0\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{3B6AF680-594A-47E8-8A5B-A4F737B15B57}\

How to erase Tekla Structures 20.0 Extension: Drawing Break Lines with the help of Advanced Uninstaller PRO

Tekla Structures 20.0 Extension: Drawing Break Lines is a program by the software company Tekla Corporation. Sometimes, computer users want to uninstall this application. This can be difficult because performing this by hand requires some experience related to removing Windows applications by hand. The best EASY action to uninstall Tekla Structures 20.0 Extension: Drawing Break Lines is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, add it. This is a good step because Advanced Uninstaller PRO is the best uninstaller and general utility to take care of your computer.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with the program's design and wealth of functions available. Advanced Uninstaller PRO is a very good package of tools.

3. Press the General Tools button


4. Press the Uninstall Programs button


5. All the programs existing on the computer will be made available to you

6. Scroll the list of programs until you locate Tekla Structures 20.0 Extension: Drawing Break Lines or simply activate the Search feature and type in "Tekla Structures 20.0 Extension: Drawing Break Lines". If it is installed on your PC the Tekla Structures 20.0 Extension: Drawing Break Lines app will be found automatically. Notice that when you select Tekla Structures 20.0 Extension: Drawing Break Lines in the list of apps, the following information regarding the application is shown to you:

• Safety rating (in the left lower corner). This explains the opinion other people have regarding Tekla Structures 20.0 Extension: Drawing Break Lines, from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Technical information regarding the program you are about to uninstall, by pressing the Properties button.

For example you can see that for Tekla Structures 20.0 Extension: Drawing Break Lines:

• The publisher is: http://www.Tekla.com
• The uninstall string is: MsiExec.exe /X{3B6AF680-594A-47E8-8A5B-A4F737B15B57}

7. Press the Uninstall button. A window asking you to confirm will come up. accept the uninstall by clicking Uninstall. Advanced Uninstaller PRO will then uninstall Tekla Structures 20.0 Extension: Drawing Break Lines.


8. After uninstalling Tekla Structures 20.0 Extension: Drawing Break Lines, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to start the cleanup. All the items of Tekla Structures 20.0 Extension: Drawing Break Lines that have been left behind will be found and you will be asked if you want to delete them. By uninstalling Tekla Structures 20.0 Extension: Drawing Break Lines with Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or folders are left behind on your disk.

Your Windows system will remain clean, speedy and able to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a recommendation to remove Tekla Structures 20.0 Extension: Drawing Break Lines by Tekla Corporation from your computer, we are not saying that Tekla Structures 20.0 Extension: Drawing Break Lines by Tekla Corporation is not a good application. This text only contains detailed instructions on how to remove Tekla Structures 20.0 Extension: Drawing Break Lines supposing you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.