Tekla Structures 2023 Service Pack 4

A guide to uninstall Tekla Structures 2023 Service Pack 4 from your PC

This page contains thorough information on how to uninstall Tekla Structures 2023 Service Pack 4 for Windows. The Windows version was created by Trimble Solutions Corporation. Check out here for more details on Trimble Solutions Corporation. More information about the software Tekla Structures 2023 Service Pack 4 can be seen at https://www.tekla.com. The application is frequently found in the C:\Program Files\Tekla Structures folder. Take into account that this location can differ depending on the user's preference. You can uninstall Tekla Structures 2023 Service Pack 4 by clicking on the Start menu of Windows and pasting the command line MsiExec.exe /X{A05FB9B4-8F74-4DE9-B9FE-D28C70023F0F}. Note that you might get a notification for admin rights. TeklaExtensionPackage.BatchBuilder.exe is the Tekla Structures 2023 Service Pack 4's main executable file and it occupies approximately 19.55 KB (20024 bytes) on disk.

The executable files below are part of Tekla Structures 2023 Service Pack 4. They occupy an average of 304.68 MB (319478240 bytes) on disk.

• CatalogApplication.exe (38.55 KB)
• DBserver.exe (61.05 KB)
• DrawingCreator.exe (427.55 KB)
• FileSystemWatcherServer.exe (19.55 KB)
• IFCExporter.exe (447.05 KB)
• IFCPluginWorker-142_Loader.exe (28.55 KB)
• materia_grpc_server.exe (129.59 MB)
• ModelExporter.exe (740.05 KB)
• msxsl.exe (24.31 KB)
• ReferenceModelImportConfiguration.exe (46.05 KB)
• ReportExporter.exe (349.55 KB)
• SPMBenchmarker.exe (25.41 MB)
• Tekla.Technology.Scripting.Sandbox.exe (30.05 KB)
• TeklaExtensionPackage.BatchBuilder.exe (19.55 KB)
• TeklaExtensionPackage.Builder.exe (263.05 KB)
• TeklaExtensionPackage.Manager.exe (197.55 KB)
• TeklaExtensionPackage.TepAutoInstaller.exe (156.05 KB)
• TeklaExtensionPackage.WarehouseDownloadDispatcher.exe (21.55 KB)
• TeklaStructures.exe (13.41 MB)
• TeklaWarehouseDownloader.exe (192.05 KB)
• TeklaWarehouseInstaller.exe (527.55 KB)
• TsepFileDispatcher.exe (287.55 KB)
• TsepInstallerConsole.exe (98.05 KB)
• xs_cancel.exe (35.05 KB)
• albion.exe (3.16 MB)
• ayrshire.exe (2.55 MB)
• CMF.exe (2.85 MB)
• cold_rolled.exe (4.12 MB)
• concrete1.exe (4.78 MB)
• concrete2.exe (4.70 MB)
• concrete3.exe (6.23 MB)
• elematic.exe (2.86 MB)
• Etex.exe (2.75 MB)
• export.exe (1.38 MB)
• hispan.exe (2.52 MB)
• Kingspan.exe (3.69 MB)
• metsec.exe (2.92 MB)
• reid.exe (2.66 MB)
• steel1.exe (18.44 MB)
• steel2.exe (2.47 MB)
• steel3.exe (4.73 MB)
• steel4.exe (4.45 MB)
• steel5.exe (3.62 MB)
• steel6.exe (2.21 MB)
• steelSections.exe (2.56 MB)
• tower.exe (2.15 MB)
• TPP.exe (2.75 MB)
• ultrazed.exe (3.43 MB)
• unitechnik.exe (4.49 MB)
• AddSurfaceSymbols.exe (158.55 KB)
• CutLines.exe (159.55 KB)
• DefineMasterDrawing.exe (99.05 KB)
• DrawingAttributesConverter.exe (1.17 MB)
• MasterDrawingCatalog.exe (100.05 KB)
• MomentConnectionSymbol.exe (161.55 KB)
• NodeAlignment.exe (186.05 KB)
• SideSymbolsNumerical.exe (85.55 KB)
• SketchReports.exe (194.05 KB)
• MultiPurposeDimensioning.exe (292.55 KB)
• SpiralBeamDimensioningPluginRuleEditor.exe (119.05 KB)
• DrawRebarPullouts.exe (287.55 KB)
• Dwg.exe (43.05 KB)
• RebarLayeringMarker.exe (422.05 KB)
• RebarMeshViewCreator.exe (161.05 KB)
• TSDrawingTools.exe (238.05 KB)
• MigrationWizard.exe (279.05 KB)
• ClashCheckManager.exe (478.05 KB)
• ExportSketchUp.exe (189.55 KB)
• ImportFromTeklaBIMsight.exe (195.05 KB)
• pdf2xxx.exe (92.55 KB)
• PDFReferenceModel.exe (212.05 KB)
• PropertySetDefinitions.exe (424.05 KB)
• ps2xxx.exe (75.05 KB)
• Publish_to_Tekla_BIMsight.exe (200.05 KB)
• RebarClassificator.exe (140.05 KB)
• SaveAsModelTemplate.exe (152.55 KB)
• Tube.NC.Export.exe (195.05 KB)
• XMLtoTEZconverter.exe (23.05 KB)
• AutomaticSplicingTool.exe (325.55 KB)
• ContinuousBeamReinforcement.exe (3.76 MB)
• CustomComponentDialogEditor.exe (381.55 KB)
• DesignGroupNumbering.exe (106.05 KB)
• DPMPrinterCommand.exe (108.05 KB)
• HMSExport.exe (264.05 KB)
• LayoutManager.exe (1.15 MB)
• ObjectBrowser.exe (115.55 KB)
• PatternLineEditor.exe (657.55 KB)
• PublishAnnotationsToTrimbleConnect.exe (234.55 KB)
• RebarSplitAndCoupler.exe (321.05 KB)
• UpdateRebarAttributes.exe (145.05 KB)
• ShapeCleaner.exe (98.05 KB)
• Steps.exe (123.05 KB)
• TeklaConnectFolderSync.exe (200.05 KB)
• TrimbleConnectInteroperability.exe (105.05 KB)
• TrimbleConnector.exe (909.55 KB)
• DirectoryBrowser.exe (230.55 KB)
• DSTVtoDXFConverter.exe (625.55 KB)
• Tekla.Technology.UserFeedback.Client.exe (21.55 KB)
• PotreeConverter.exe (2.14 MB)
• PotreeConverter2.exe (3.04 MB)
• TzfImporter_cmd.exe (47.55 KB)
• sdeprocess.exe (6.61 MB)
• SupportTool.exe (355.05 KB)
• symed.exe (459.05 KB)
• StartTemplateEditor.exe (145.05 KB)
• TplEd.exe (2.16 MB)
• TrimbleConnectVisualizer.exe (661.05 KB)
• UnityCrashHandler64.exe (1.06 MB)
• installanchorservice.exe (368.02 KB)
• uninstallanchorservice.exe (368.52 KB)
• ImportLoader.exe (27.05 KB)
• ImportLoader.exe (29.05 KB)
• ImportLoader.exe (29.05 KB)
• IFCPluginWorker-142_Loader.exe (28.55 KB)
• ImportLoader.exe (33.55 KB)
• ImportLoader.exe (29.05 KB)
• ImportLoader.exe (26.05 KB)
• ImportLoader.exe (26.05 KB)
• ImportLoader.exe (26.05 KB)
• Convert.exe (94.55 KB)

...click to view all...

The current page applies to Tekla Structures 2023 Service Pack 4 version 223.0.26918 alone. If you are manually uninstalling Tekla Structures 2023 Service Pack 4 we suggest you to check if the following data is left behind on your PC.

Folders remaining:

• C:\TeklaStructures

The files below remain on your disk when you remove Tekla Structures 2023 Service Pack 4:

• C:\TeklaStructures\2023.0\bin\Akit5.dll
• C:\TeklaStructures\2023.0\bin\AkitUI.dll
• C:\TeklaStructures\2023.0\bin\AkitUITests.exe.config
• C:\TeklaStructures\2023.0\bin\Analysis.dll
• C:\TeklaStructures\2023.0\bin\Antlr4.Runtime.Standard.dll
• C:\TeklaStructures\2023.0\bin\applications\rpc\albion\albion.exe
• C:\TeklaStructures\2023.0\bin\applications\rpc\albion\albion.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\albion\albion_resources.dll
• C:\TeklaStructures\2023.0\bin\applications\rpc\albion\application.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\ayrshire\application.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\ayrshire\ayrshire.exe
• C:\TeklaStructures\2023.0\bin\applications\rpc\ayrshire\ayrshire.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\ayrshire\ayrshire_resources.dll
• C:\TeklaStructures\2023.0\bin\applications\rpc\BW\application.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\BW\BW.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\CMF\application.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\CMF\CMF.exe
• C:\TeklaStructures\2023.0\bin\applications\rpc\CMF\CMF.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\CMF\cmf_resources.dll
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\albion_cc.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\albion_hcss.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\albion_restraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\ALBION_SIGMARestraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\AlbionSettings\HorizontalCladding.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Albionstandard.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\AlbionTrans.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\AlbionZsleeve.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\application.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Ayrshirestandard.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\AyrshireTrans.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Backmarks.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\beam.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\BlindBolt.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\boltdiam.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\brloc.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\brnam.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\BW_restraint2.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\BW_siderail.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Cleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\Backmarks.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\Cleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\CMF_eavesrestraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\CMF_restraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\CMF_siderail.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\EavesStanchion.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\ExtendedFirewall.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\FIREWALL.DAT
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\FirewallCleats.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\HEndBay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\HorizontalCladding.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\purlin_ties.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\Stay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\Stiffener.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\CMFSettings\Zsleeve.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\cold_rolled.exe
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\cold_rolled.inp
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\cold_rolled_resources.dll
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Duggans_Data.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EBCCleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\AntiSag.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\Backmarks.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\Cleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\EavesAntiSag.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\eavesrestraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\EavesStanchion.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\ExtendedFirewall.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\FIREWALL.DAT
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\FirewallCleats.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\HEndBay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\HorizontalCladding.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\purlin_ties.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\restraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\siderail.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\Stay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\Stiffener.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\EtexSettings\Zsleeve.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\ExtendedFirewall.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\FIREWALL.DAT
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\FirewallCleats.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Flat_AntiSag.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\FlatAntiSag.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\HEndBay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\hispan_restraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\Hispanstandard.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\HispanTrans.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\HisZCleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\HorizontalCladding.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\iendbay.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\AntiSag.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\Backmarks
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\Cleat.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\EavesStanchion.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\EavesStanchion1.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\ExtendedFirewall.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\FIREWALL.DAT
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\FlatRoof.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\HorizontalCladding.xml
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\Kingspan_eavesrestraint.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\Kingspan_Siderail.dat
• C:\TeklaStructures\2023.0\bin\applications\rpc\cold_rolled\KingspanSettings\Kingspan_Wall.dat

You will find in the Windows Registry that the following data will not be removed; remove them one by one using regedit.exe:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|TeklaStructures|2023.0|bin|applications|Tekla|Tools|symed|symed.exe
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{A05FB9B4-8F74-4DE9-B9FE-D28C70023F0F}

Use regedit.exe to remove the following additional registry values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures\2023.0\bin\TeklaStructures.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\TeklaStructures\2023.0\bin\TeklaStructures.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\TeklaStructures\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{A05FB9B4-8F74-4DE9-B9FE-D28C70023F0F}\

How to uninstall Tekla Structures 2023 Service Pack 4 from your PC with Advanced Uninstaller PRO

Tekla Structures 2023 Service Pack 4 is an application released by Trimble Solutions Corporation. Frequently, people try to remove this program. This can be easier said than done because deleting this by hand requires some advanced knowledge related to PCs. The best QUICK action to remove Tekla Structures 2023 Service Pack 4 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to maximize the performance of your Windows system.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with the program's design and number of features available. Advanced Uninstaller PRO is a very useful program.

3. Press the General Tools category


4. Press the Uninstall Programs tool


5. All the programs installed on the computer will appear

6. Navigate the list of programs until you locate Tekla Structures 2023 Service Pack 4 or simply click the Search field and type in "Tekla Structures 2023 Service Pack 4". If it is installed on your PC the Tekla Structures 2023 Service Pack 4 app will be found very quickly. Notice that after you click Tekla Structures 2023 Service Pack 4 in the list , some information regarding the application is available to you:

• Safety rating (in the left lower corner). This explains the opinion other users have regarding Tekla Structures 2023 Service Pack 4, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information regarding the app you want to remove, by pressing the Properties button.

For example you can see that for Tekla Structures 2023 Service Pack 4:

• The web site of the program is: https://www.tekla.com
• The uninstall string is: MsiExec.exe /X{A05FB9B4-8F74-4DE9-B9FE-D28C70023F0F}

7. Press the Uninstall button. A window asking you to confirm will come up. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will automatically remove Tekla Structures 2023 Service Pack 4.


8. After uninstalling Tekla Structures 2023 Service Pack 4, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to start the cleanup. All the items of Tekla Structures 2023 Service Pack 4 which have been left behind will be found and you will be able to delete them. By removing Tekla Structures 2023 Service Pack 4 using Advanced Uninstaller PRO, you are assured that no registry entries, files or directories are left behind on your disk.

Your computer will remain clean, speedy and ready to run without errors or problems.

Disclaimer

The text above is not a recommendation to remove Tekla Structures 2023 Service Pack 4 by Trimble Solutions Corporation from your computer, we are not saying that Tekla Structures 2023 Service Pack 4 by Trimble Solutions Corporation is not a good application for your PC. This page simply contains detailed instructions on how to remove Tekla Structures 2023 Service Pack 4 supposing you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.