Publishers

TecnoPLOT TecnoPLOT





A guide to uninstall TecnoPLOT from your PC

This info is about TecnoPLOT for Windows. Below you can find details on how to uninstall it from your computer. The Windows version was created by Steel&Graphics. You can read more on Steel&Graphics or check for application updates here. More details about TecnoPLOT can be found at . The application is often placed in the C:\Steel\TecnoPLOT directory (same installation drive as Windows). The full command line for uninstalling TecnoPLOT is C:\Program Files (x86)\InstallShield Installation Information\{0D23AA3C-08FA-4152-8AD4-7282888AD316}\setup.exe. Note that if you will type this command in Start / Run Note you may get a notification for admin rights. The application's main executable file occupies 877.50 KB (898560 bytes) on disk and is titled setup.exe.

The executable files below are part of TecnoPLOT. They take about 877.50 KB (898560 bytes) on disk.

  • setup.exe (877.50 KB)


The current web page applies to TecnoPLOT version 16.02.04.2015 only. You can find below info on other application versions of TecnoPLOT:

...click to view all...
If you are manually uninstalling TecnoPLOT we advise you to check if the following data is left behind on your PC.

Folders left behind when you uninstall TecnoPLOT:
  • C:\Steel\TecnoPLOT

The files below were left behind on your disk when you remove TecnoPLOT:
  • C:\Steel\TecnoPLOT\Bin\Plugin\BARS.DBF
  • C:\Steel\TecnoPLOT\Bin\Plugin\Drv\Dstv.dll
  • C:\Steel\TecnoPLOT\Bin\Plugin\Drv\Dstv.INI
  • C:\Steel\TecnoPLOT\Bin\Plugin\PIECES.DBF
  • C:\Steel\TecnoPLOT\CFG_GEN.INI
  • C:\Steel\TecnoPLOT\DBHOLE.TXT
  • C:\Steel\TecnoPLOT\DBMAT.CDX
  • C:\Steel\TecnoPLOT\DBMAT.DBF
  • C:\Steel\TecnoPLOT\DBPROF.CDX
  • C:\Steel\TecnoPLOT\DBPROF.DBF
  • C:\Steel\TecnoPLOT\DBSPS.TXT
  • C:\Steel\TecnoPLOT\ForwardAPI.dll
  • C:\Steel\TecnoPLOT\help\Barcodes.chm
  • C:\Steel\TecnoPLOT\help\tecnoplot_esp.chm
  • C:\Steel\TecnoPLOT\help\tecnoplot_ita.chm
  • C:\Steel\TecnoPLOT\help\tecnoplot_usr.chm
  • C:\Steel\TecnoPLOT\Holes\Croce.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel01.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel02.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel03.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel04.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel05.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel06.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel07.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel08.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel09.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel10.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel11.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel12.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel13.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel14.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel15.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel16.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel17.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel18.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel19.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel20.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel21.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel22.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel23.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel24.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel25.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel26.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel27.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel28.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel29.dxf
  • C:\Steel\TecnoPLOT\Holes\Steel30.dxf
  • C:\Steel\TecnoPLOT\Lib\BaseHole.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_5.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_6.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_7.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_a.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_b.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_c.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_d.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_e.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_f.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_g.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_h.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_i.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_l.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_m.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_n.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_o.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_s.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_t.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_u.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_v.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_y.dxf
  • C:\Steel\TecnoPLOT\Lib\bend_z.dxf
  • C:\Steel\TecnoPLOT\Lib\Chamfer.dxf
  • C:\Steel\TecnoPLOT\Lib\Cutter.dxf
  • C:\Steel\TecnoPLOT\Lib\Educational.DXF
  • C:\Steel\TecnoPLOT\Lib\FoldDXedgeMM.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDXedgeMP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDXedgePM.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDXedgePP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDxLevel1M.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDxLevel1P.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDxLevel2M.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldDxLevel2P.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldPlateArcN.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldPlateArcP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldPlateN.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldPlateP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSXedgeMM.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSXedgeMP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSXedgePM.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSXedgePP.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSxLevel1M.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSxLevel1P.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSxLevel2M.dxf
  • C:\Steel\TecnoPLOT\Lib\FoldSxLevel2P.dxf
  • C:\Steel\TecnoPLOT\Lib\IpeWeld.dxf
  • C:\Steel\TecnoPLOT\Lib\Mark.DXF
  • C:\Steel\TecnoPLOT\Lib\Mcl_Table.dxf
  • C:\Steel\TecnoPLOT\Lib\Nfc.DXF
  • C:\Steel\TecnoPLOT\Lib\OpenM.dxf
  • C:\Steel\TecnoPLOT\Lib\OpenP.dxf
  • C:\Steel\TecnoPLOT\Lib\Origin.dxf

You will find in the Windows Registry that the following keys will not be uninstalled; remove them one by one using regedit.exe:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{0D23AA3C-08FA-4152-8AD4-7282888AD316}
  • HKEY_LOCAL_MACHINE\Software\Steel&Graphics\TecnoPLOT

Supplementary values that are not cleaned:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\D:\Engineering Programs\Autodesk AutoCAD\Steel_Graphics_TecnoMETAL_BIM_Suite_2015\Programs\New folder\patched\TecnoPLOT\PltWIN32.exe
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\D:\Engineering Programs\Autodesk AutoCAD\Steel_Graphics_TecnoMETAL_BIM_Suite_2015\Programs\patched files\TecnoPLOT\PltWIN32.exe


A way to delete TecnoPLOT from your PC with Advanced Uninstaller PRO

TecnoPLOT is a program offered by Steel&Graphics. Some computer users want to uninstall this program. Sometimes this is hard because deleting this by hand takes some knowledge related to removing Windows applications by hand. The best QUICK solution to uninstall TecnoPLOT is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, add it. This is good because Advanced Uninstaller PRO is the best uninstaller and general utility to maximize the performance of your Windows system.

DOWNLOAD NOW

  • visit Download Link
  • download the program by clicking on the DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire the program's interface and number of tools available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Press the General Tools button
Go to General Tools


4. Click on the Uninstall Programs feature
Go to Uninstall Programs


5. A list of the applications existing on your computer will be shown to you

6. Scroll the list of applications until you find TecnoPLOT or simply click the Search feature and type in "TecnoPLOT". The TecnoPLOT app will be found automatically. When you select TecnoPLOT in the list of programs, the following information about the program is shown to you:


  • Star rating (in the left lower corner). This explains the opinion other people have about TecnoPLOT, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Press the Read reviews button.
  • Technical information about the application you are about to remove, by clicking on the Properties button.
For example you can see that for TecnoPLOT:





  • The publisher is: http://www.Steel&graphics.com
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{0D23AA3C-08FA-4152-8AD4-7282888AD316}\setup.exe
7. Click the Uninstall button. A confirmation window will appear. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will uninstall TecnoPLOT.
Uninstall TecnoPLOT


8. After uninstalling TecnoPLOT, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to go ahead with the cleanup. All the items of TecnoPLOT that have been left behind will be found and you will be asked if you want to delete them. By removing TecnoPLOT with Advanced Uninstaller PRO, you are assured that no Windows registry items, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and able to serve you properly.



Disclaimer

This page is not a piece of advice to remove TecnoPLOT by Steel&Graphics from your computer, nor are we saying that TecnoPLOT by Steel&Graphics is not a good application for your PC. This page simply contains detailed info on how to remove TecnoPLOT in case you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.

2018-08-25 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2018-08-25 13:38:35.183