Publishers

SprutCAM 7 SprutCAM 7





A guide to uninstall SprutCAM 7 from your PC

You can find below details on how to uninstall SprutCAM 7 for Windows. The Windows version was developed by Sprut Technology. Open here where you can get more info on Sprut Technology. More info about the application SprutCAM 7 can be seen at . SprutCAM 7 is commonly set up in the C:\Program Files (x86)\Sprut Technology\SprutCAM 7 folder, however this location can vary a lot depending on the user's decision when installing the program. The full command line for removing SprutCAM 7 is C:\Program Files (x86)\Sprut Technology\SprutCAM 7\uninstall.exe. Note that if you will type this command in Start / Run Note you may be prompted for admin rights. SprutCAM.exe is the programs's main file and it takes around 180.00 KB (184320 bytes) on disk.

SprutCAM 7 is composed of the following executables which occupy 2.59 MB (2719088 bytes) on disk:

  • Inp.exe (525.50 KB)
  • SCModifier.exe (504.00 KB)
  • SprutCAM.exe (180.00 KB)
  • sprutpp.exe (845.00 KB)
  • uninstaller.exe (213.86 KB)
  • SprutTutorial.exe (387.00 KB)
...click to view all...

This info is about SprutCAM 7 version 7.0.8.37180 alone. You can find below info on other versions of SprutCAM 7:

...click to view all...
Quite a few files, folders and registry data can be left behind when you are trying to remove SprutCAM 7 from your computer.

Directories that were left behind:
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7
  • C:\Users\%user%\AppData\Roaming\SPRUT Technology\SprutCAM

Files remaining:
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\AddIns\AddinMgr.DLL
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\BuildMCD.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\ChrToCurve.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\CLDImport.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Codifier.dat
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Conv3.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Conv4.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\ExtConfigurator.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images.DLL
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\007.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\07.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\1.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\10.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\11.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\12.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\15.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\16-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\17-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\18-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\19-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\20-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\21-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\22-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\22-2048_1.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\22-2048_2.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\23-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\24-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\29-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\3.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\30-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\32-2048_1.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\32-2048_2.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\33-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\34-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\35-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\36-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\37-2048.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\4.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\6.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\6-1.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\7.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\8.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\9.jpg
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\Dark.bmp
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\Backgrounds\Light.bmp
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Images\env.bmp
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Inp.chm
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Inp.exe
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\inpd.DLL
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Key\SprutCAMLng.key
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\Key\Uninstall4NSIS.ini
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\ns_setup.log
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\NSManager.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\ParamList.dat
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\PS\Fontmap
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\PS\P.ps
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\PS\psdata.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\PS\psimport.dll
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\PS\xlatmap
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_0_15.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_100_1000.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_10002.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_10004.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_10100.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_1022.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_110_0.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_11003.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_11004.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_120_0.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_12006.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_12102.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_12103.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_130_0.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_13005.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_13006.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_140_0.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\sch_14000.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_15003.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_200_1009.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_200_1010.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_200_1011.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_200_1012.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_210_1012.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_300_1022.s_t
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_3000.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4011.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4022.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4030.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4031.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4032.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4035.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_4039.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5015.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5021.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5030.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5031.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5032.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5033.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5041.S_T
  • C:\Program Files (x86)\Sprut Technology\SprutCAM 7\pschema\SCH_5049.S_T

Frequently the following registry keys will not be uninstalled:
  • HKEY_CLASSES_ROOT\AppID\SprutCAM.DLL
  • HKEY_CLASSES_ROOT\SCKernel.SprutCAM_Application
  • HKEY_CLASSES_ROOT\SprutCAM..BitmapHandler
  • HKEY_CLASSES_ROOT\SprutCAM.SprutCAM
  • HKEY_CLASSES_ROOT\SprutCAM.SwDocument
  • HKEY_CLASSES_ROOT\stc.SprutCAM
  • HKEY_CURRENT_USER\Software\Sprut Technology\SprutCAM
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\SprutCAM 7
  • HKEY_LOCAL_MACHINE\Software\Sprut Technology\SprutCAM

Use regedit.exe to remove the following additional registry values from the Windows Registry:
  • HKEY_CLASSES_ROOT\.stc\stc.SprutCAM_backup
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Sprut Technology\SprutCAM 7\SprutCam.exe.FriendlyAppName
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2159360763-1134517242-3861980520-1001\\Device\HarddiskVolume4\Program Files (x86)\Sprut Technology\SprutCAM 7\SprutCAM.exe
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2159360763-1134517242-3861980520-1002\\Device\HarddiskVolume4\Program Files (x86)\Sprut Technology\SprutCAM 7\SprutCAM.exe


A way to erase SprutCAM 7 from your PC with Advanced Uninstaller PRO

SprutCAM 7 is an application released by the software company Sprut Technology. Frequently, computer users decide to remove this program. This is troublesome because deleting this manually requires some know-how regarding Windows internal functioning. One of the best EASY practice to remove SprutCAM 7 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and all around utility to clean your Windows PC.

DOWNLOAD NOW

  • navigate to Download Link
  • download the program by pressing the green DOWNLOAD button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's interface and wealth of features available. Advanced Uninstaller PRO is a powerful PC management program.

3. Press the General Tools category
Go to General Tools


4. Press the Uninstall Programs feature
Go to Uninstall Programs


5. A list of the programs existing on your computer will be made available to you

6. Navigate the list of programs until you find SprutCAM 7 or simply activate the Search feature and type in "SprutCAM 7". The SprutCAM 7 program will be found automatically. Notice that when you select SprutCAM 7 in the list of applications, the following data about the program is available to you:


  • Safety rating (in the lower left corner). The star rating explains the opinion other users have about SprutCAM 7, from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Press the Read reviews button.
  • Details about the app you want to uninstall, by pressing the Properties button.
For example you can see that for SprutCAM 7:





  • The web site of the program is: http://www.sprutcam.com
  • The uninstall string is: C:\Program Files (x86)\Sprut Technology\SprutCAM 7\uninstall.exe
7. Press the Uninstall button. A confirmation window will appear. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will uninstall SprutCAM 7.
Uninstall SprutCAM 7


8. After uninstalling SprutCAM 7, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to start the cleanup. All the items of SprutCAM 7 which have been left behind will be found and you will be able to delete them. By uninstalling SprutCAM 7 using Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or folders are left behind on your computer.

Your Windows PC will remain clean, speedy and ready to take on new tasks.

DOWNLOAD NOW


Geographical user distribution

  • Windows 7 (6.1)
  • 10.0
Software Application


Disclaimer

The text above is not a recommendation to uninstall SprutCAM 7 by Sprut Technology from your PC, nor are we saying that SprutCAM 7 by Sprut Technology is not a good application for your computer. This text only contains detailed instructions on how to uninstall SprutCAM 7 supposing you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2018-02-15 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2018-02-15 07:26:56.500