SprutCAM 2007

A guide to uninstall SprutCAM 2007 from your computer

SprutCAM 2007 is a Windows application. Read below about how to remove it from your computer. It was created for Windows by Sprut Technology. You can find out more on Sprut Technology or check for application updates here. Further information about SprutCAM 2007 can be seen at http://www.sprutcam.com. SprutCAM 2007 is typically installed in the C:\Program Files (x86)\Sprut Technology\SprutCAM 2007 folder, however this location may vary a lot depending on the user's option while installing the application. The full command line for uninstalling SprutCAM 2007 is C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\uninstall.exe. Keep in mind that if you will type this command in Start / Run Note you may receive a notification for administrator rights. The program's main executable file is named SprutCAM.exe and it has a size of 94.50 KB (96768 bytes).

The following executables are incorporated in SprutCAM 2007. They occupy 2.18 MB (2286618 bytes) on disk.

• Inp.exe (383.00 KB)
• SCModifier.exe (446.00 KB)
• SprutCAM.exe (94.50 KB)
• sprutpp.exe (845.00 KB)
• uninstall.exe (77.53 KB)
• SprutTutorial.exe (387.00 KB)

...click to view all...

The current web page applies to SprutCAM 2007 version 2007.5.54.32000 alone. If you are manually uninstalling SprutCAM 2007 we recommend you to verify if the following data is left behind on your PC.

Folders that were left behind:

• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007
• C:\Users\%user%\AppData\Local\Temp\SprutCAM
• C:\Users\%user%\AppData\Local\VirtualStore\Program Files (x86)\Sprut Technology\SprutCAM 2007
• C:\Users\%user%\AppData\Roaming\Sprut Technology\SprutCAM

The files below were left behind on your disk by SprutCAM 2007 when you uninstall it:

• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\BuildMCD.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\ChrToCurve.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\CLDImport.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Codifier.dat
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Conv3.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Conv4.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\ExtConfigurator.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\images.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Images\env.bmp
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Inp.chm
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Inp.exe
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\inpd.DLL
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Key\SprutCAMLng.key
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Key\Uninstall4NSIS.ini
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\ns_setup.log
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\NSManager.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\ParamList.dat
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\PS\Fontmap
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\PS\P.ps
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\PS\psdata.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\PS\psimport.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\PS\xlatmap
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_0_15.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_100_1000.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_10002.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_10004.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_10100.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_1022.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_110_0.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_11003.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_11004.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_120_0.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_12006.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_12102.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_12103.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_130_0.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_13005.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_13006.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_140_0.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\sch_14000.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_15003.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_200_1009.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_200_1010.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_200_1011.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_200_1012.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_210_1012.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_300_1022.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_3000.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4011.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4022.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4030.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4031.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4032.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4035.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_4039.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5015.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5021.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5030.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5031.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5032.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5033.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5041.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5049.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5050.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5051.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5053.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5054.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5056.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5057.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5058.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_5059.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_6020.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_6021.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_7002.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_7007.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_7014.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_7015.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_7016.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_8000.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_8002.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_8005.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_8008.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_8101.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_9001.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_9003.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_9008.s_t
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\pschema\SCH_9100.S_T
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\RhIO.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SCKernel.DLL
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SCModifier.exe
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SetupLog.txt
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SGMLib.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\sprutCAM.chm
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SprutCAM.exe
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\sprutpp.exe
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\SprutShellEx.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\STUB.DXF
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Supplement\CommonTypes.xml
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Supplement\LatheCalc.dll
• C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\Supplement\LatheWin.DLL

Additional registry values that you should delete:

• HKEY_CLASSES_ROOT\.stc\stc.SprutCAM_backup
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume2\Program Files (x86)\Sprut Technology\SprutCAM 2007\SCModifier.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume2\Program Files (x86)\Sprut Technology\SprutCAM 2007\SprutCAM.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume2\Users\UserName\AppData\Local\Temp\SprutCAM_Install.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume2\Users\UserName\Downloads\SprutCAM14Setup.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume4\Softwares\sprutcam\SprutCAM 2007\Crack\Patch.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-4081082472-3608206428-2174670080-1001\\Device\HarddiskVolume4\Softwares\sprutcam\SprutCAM 2007\SprutCAM_2007.5.54.32000_Downloadly.ir.exe

How to uninstall SprutCAM 2007 from your computer using Advanced Uninstaller PRO

SprutCAM 2007 is a program offered by Sprut Technology. Frequently, users try to erase this application. Sometimes this is difficult because doing this manually requires some know-how regarding removing Windows applications by hand. One of the best QUICK solution to erase SprutCAM 2007 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and all around utility to take care of your Windows computer.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to admire Advanced Uninstaller PRO's design and wealth of functions available. Advanced Uninstaller PRO is a very good package of utilities.

3. Click on the General Tools category


4. Activate the Uninstall Programs feature


5. All the programs existing on your computer will be made available to you

6. Navigate the list of programs until you locate SprutCAM 2007 or simply activate the Search field and type in "SprutCAM 2007". If it exists on your system the SprutCAM 2007 program will be found very quickly. Notice that when you click SprutCAM 2007 in the list of programs, some information about the application is made available to you:

• Safety rating (in the lower left corner). The star rating explains the opinion other people have about SprutCAM 2007, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details about the application you want to remove, by pressing the Properties button.

For instance you can see that for SprutCAM 2007:

• The web site of the application is: http://www.sprutcam.com
• The uninstall string is: C:\Program Files (x86)\Sprut Technology\SprutCAM 2007\uninstall.exe

7. Click the Uninstall button. A window asking you to confirm will appear. Confirm the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will automatically remove SprutCAM 2007.


8. After uninstalling SprutCAM 2007, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to perform the cleanup. All the items that belong SprutCAM 2007 that have been left behind will be found and you will be asked if you want to delete them. By uninstalling SprutCAM 2007 with Advanced Uninstaller PRO, you can be sure that no registry items, files or folders are left behind on your computer.

Your system will remain clean, speedy and ready to take on new tasks.

Geographical user distribution

Disclaimer

The text above is not a recommendation to uninstall SprutCAM 2007 by Sprut Technology from your PC, we are not saying that SprutCAM 2007 by Sprut Technology is not a good application for your PC. This page simply contains detailed info on how to uninstall SprutCAM 2007 in case you want to. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.