SolidLink x64 2014 R1

A way to uninstall SolidLink x64 2014 R1 from your PC

This page is about SolidLink x64 2014 R1 for Windows. Below you can find details on how to uninstall it from your computer. It was developed for Windows by Vero Software Limited. Open here for more details on Vero Software Limited. More information about the application SolidLink x64 2014 R1 can be found at http://www.verosoftware.com. The application is frequently placed in the C:\Program Files\Common Files\Planit\2014.10\SolidLink directory. Take into account that this location can differ being determined by the user's preference. The full command line for uninstalling SolidLink x64 2014 R1 is MsiExec.exe /I{1074FF97-BF5D-4D92-8783-9F4421ECBE3B}. Note that if you will type this command in Start / Run Note you might get a notification for admin rights. SolidLink.exe is the programs's main file and it takes approximately 241.50 KB (247296 bytes) on disk.

SolidLink x64 2014 R1 installs the following the executables on your PC, taking about 486.02 KB (497688 bytes) on disk.

• SolidLink.exe (241.50 KB)
• CATSTART.exe (52.50 KB)
• chcatenv.exe (24.50 KB)
• delcatenv.exe (26.00 KB)
• readcatenv.exe (16.50 KB)
• setcatenv.exe (31.00 KB)
• SPAXSpawned.exe (14.02 KB)
• lumdevdi.exe (80.00 KB)

...click to view all...

The current web page applies to SolidLink x64 2014 R1 version 2014.10 only. Following the uninstall process, the application leaves leftovers on the PC. Some of these are listed below.

Folders remaining:

• C:\Program Files\Common Files\Planit\2014.10\SolidLink

The files below were left behind on your disk when you remove SolidLink x64 2014 R1:

• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\_TessImplDebug.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\_TessImplGeom.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\_TessImplPolygon.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\_TessImplTopology.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\AC0SPNewXML.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\AC0SPXML.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\AC0TLNK.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\atl80.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\BatchDataExchange.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\BatchDataExchangeBox.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\BatchFlow.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\BatchMonitor.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\BftierV5.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAAFreeStyleItf.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT2DPolygonClip.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlBaseServices.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlCtrlToolsOption.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlExportManager.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlExportServices.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlInterfaces.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlLightBaseServices.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlPubIDL.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlSaveAs.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CAT3DXmlTypeLib.tlb
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAdvancedMathematics.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAdvancedTopologicalOpe.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAdvancedTopologicalOpeLight.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAfrLicensing.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAfrMail.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnalysisInterface.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnalysisToolkit.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnalysisTypLib.tlb
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnAutomation.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnCheck.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnotationModeler.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnotationModelerUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnotationTypeLib.tlb
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAnnPackage.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATApplicationFrame.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAppliServices.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssCouMdl.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssemblyInterfaces.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssemblyProIDL.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssemblyTypeLib.tlb
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssPdmFact.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAssSelection.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAutoItf.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATAxisBody.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBasicTopologicalOpe.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatCAAGrid.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatchDll.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatchUtils.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatCliMonitor.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatProtocol.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBatSrvMonitor.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBBMagic.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBinaryXml.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWBeadUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWDimVisualization.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWError.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWGraph.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWHoleUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWIntegration.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWInterfaces.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWModel.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWOperators.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWRidgeUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWUIError.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWUtilitiesModel.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATBIWUtilitiesUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCacheSettings.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafAutomation.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafAutostart.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafCGMDocument.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafDocumentation.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafDynLicensing.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafErrorLogAddin.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafHPGLDocument.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafLicensing.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPCSAddin.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPrint.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPrintAutoCtrlToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPrintCtrlToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPrintToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPSDocument.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPublishCtrlToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafPublishToolsOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafRasterDocument.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafSearchUI.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafSoftKeyboard.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafSVGDocument.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCafVisuOptions.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCamClean.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCamController.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCamItf.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCamModel.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCamView.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCaptureTools.dll
• C:\Program Files\Common Files\Planit\2014.10\SolidLink\lib3dx\win_b64\code\bin\CATCaxModelConvert.dll

Registry keys:

• HKEY_CLASSES_ROOT\SolidLink.Document.2014.10
• HKEY_CURRENT_UserName\Software\Local AppWizard-Generated Applications\SolidLink
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\79FF4701D5FB29D47838F94412CEEBB3
• HKEY_LOCAL_MACHINE\Software\Hexagon\SolidLink
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{1074FF97-BF5D-4D92-8783-9F4421ECBE3B}
• HKEY_LOCAL_MACHINE\Software\Wow6432Node\Planit\SolidLink

Supplementary registry values that are not removed:

• HKEY_CLASSES_ROOT\Installer\Features\79FF4701D5FB29D47838F94412CEEBB3\SolidLink
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\79FF4701D5FB29D47838F94412CEEBB3\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Common Files\Planit\2014.10\SolidLink\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{1074FF97-BF5D-4D92-8783-9F4421ECBE3B}\

How to remove SolidLink x64 2014 R1 from your PC with the help of Advanced Uninstaller PRO

SolidLink x64 2014 R1 is an application released by Vero Software Limited. Some people decide to erase it. This can be troublesome because performing this by hand takes some knowledge related to Windows internal functioning. The best SIMPLE action to erase SolidLink x64 2014 R1 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, add it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and all around tool to optimize your Windows PC.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to get familiar with Advanced Uninstaller PRO's interface and wealth of tools available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Press the General Tools category


4. Click on the Uninstall Programs feature


5. All the applications installed on the PC will be made available to you

6. Navigate the list of applications until you find SolidLink x64 2014 R1 or simply activate the Search feature and type in "SolidLink x64 2014 R1". The SolidLink x64 2014 R1 application will be found very quickly. Notice that when you select SolidLink x64 2014 R1 in the list of apps, some information regarding the program is available to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other people have regarding SolidLink x64 2014 R1, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Press the Read reviews button.
• Technical information regarding the program you are about to uninstall, by pressing the Properties button.

For instance you can see that for SolidLink x64 2014 R1:

• The publisher is: http://www.verosoftware.com
• The uninstall string is: MsiExec.exe /I{1074FF97-BF5D-4D92-8783-9F4421ECBE3B}

7. Press the Uninstall button. A confirmation dialog will show up. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will uninstall SolidLink x64 2014 R1.


8. After uninstalling SolidLink x64 2014 R1, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to perform the cleanup. All the items that belong SolidLink x64 2014 R1 which have been left behind will be found and you will be able to delete them. By removing SolidLink x64 2014 R1 with Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your disk.

Your Windows PC will remain clean, speedy and able to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a recommendation to remove SolidLink x64 2014 R1 by Vero Software Limited from your PC, we are not saying that SolidLink x64 2014 R1 by Vero Software Limited is not a good application for your PC. This text only contains detailed instructions on how to remove SolidLink x64 2014 R1 supposing you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.