SolidCAM2019

A way to uninstall SolidCAM2019 from your computer

You can find on this page details on how to remove SolidCAM2019 for Windows. The Windows release was developed by SolidCAM. Further information on SolidCAM can be seen here. More details about the program SolidCAM2019 can be seen at www.solidcam.com. Usually the SolidCAM2019 program is found in the C:\Program Files\SolidCAM2019 folder, depending on the user's option during install. The full command line for uninstalling SolidCAM2019 is C:\Program Files (x86)\InstallShield Installation Information\{B39680F4-E619-41CE-AB68-F8FD0F02CFFC}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you might get a notification for administrator rights. SolidCAM2019's primary file takes around 643.49 KB (658936 bytes) and is called SolidCAME.exe.

The following executables are installed along with SolidCAM2019. They take about 225.10 MB (236035552 bytes) on disk.

• 7za.exe (1.09 MB)
• AboutSC.exe (255.99 KB)
• AboutSCe.exe (246.49 KB)
• Activation.exe (151.99 KB)
• ChooseLang.exe (662.49 KB)
• ConnectManager.exe (1.55 MB)
• CrashSender1402.exe (1.17 MB)
• DocEdit.exe (770.49 KB)
• dogma12.exe (1.27 MB)
• dogma23.exe (1.51 MB)
• dogma24.exe (776.59 KB)
• DrawTools.exe (1.45 MB)
• MachineIdEditor.exe (61.49 KB)
• machsim.exe (456.50 KB)
• mirage.exe (644.09 KB)
• openpart.exe (1,007.49 KB)
• ProgressIndicator.exe (620.49 KB)
• scautom.exe (68.99 KB)
• SendEMail.exe (1.24 MB)
• Solidcam.exe (41.39 MB)
• SolidCAME.exe (643.49 KB)
• Splash.exe (601.94 KB)
• TPE.exe (2.16 MB)
• unzip.exe (200.00 KB)
• Viewer.exe (626.50 KB)
• WireEdmDbEditor.exe (44.00 KB)
• zip.exe (284.00 KB)
• NcEditor.exe (1.44 MB)
• NcEditorCrashReport.exe (12.50 KB)
• CamE_BuildZoneArea.exe (304.50 KB)
• CamE_ChainBitangentPts1.exe (237.50 KB)
• CamE_ChainBitangentPts2.exe (243.00 KB)
• CamE_ChainCtrs.exe (393.50 KB)
• CamE_ClipBox.exe (262.50 KB)
• CamE_CmdInterpreter.exe (554.50 KB)
• CamE_ComputeBox.exe (388.50 KB)
• CamE_ConvexCutters.exe (1.35 MB)
• CamE_CutRes1.exe (248.50 KB)
• CamE_CutRes2.exe (253.00 KB)
• CamE_DetectZone.exe (792.00 KB)
• CamE_Lead.exe (1.10 MB)
• CamE_LimitRemachZcut.exe (682.00 KB)
• CamE_MidCurve3d.exe (500.00 KB)
• CamE_ParamUtils.exe (563.00 KB)
• CamE_PartCollisionCheck.exe (751.50 KB)
• CamE_RemoveSmallSlices.exe (166.50 KB)
• CamE_RestMachiningAreaClip.exe (184.00 KB)
• CamE_RestMachiningEquictr.exe (1.20 MB)
• CamE_RestMachiningRawArea.exe (168.50 KB)
• CamE_RestMachiningSlicesDiff.exe (976.50 KB)
• CamE_RestMachiningSlicesDiff2.exe (1.04 MB)
• CamE_RestMachiningSlicesDiffBull.exe (350.50 KB)
• CamE_ResToCcv.exe (17.00 KB)
• CamE_SampleLimitCurve.exe (463.00 KB)
• CamE_SliceStl.exe (254.50 KB)
• CamE_SmoothToolpath.exe (1.01 MB)
• CamE_SurfBoundary.exe (529.00 KB)
• CamE_SurfBoundaryColCheck.exe (768.50 KB)
• CamE_SurfBoundaryToolShift.exe (823.00 KB)
• CamE_SurfExtension.exe (844.50 KB)
• CamE_Utility.exe (490.50 KB)
• CamE_XYcut.exe (1.84 MB)
• CamE_XYcutBitangent.exe (151.00 KB)
• CamE_XYcutBoundary3d.exe (406.50 KB)
• CamE_XYcutExtend.exe (847.00 KB)
• CamE_XYScanCurveOffset.exe (233.00 KB)
• CamE_XYZGridSlice.exe (250.00 KB)
• CamE_Zcut.exe (924.00 KB)
• CamE_ZcutBitangent.exe (283.50 KB)
• CamE_ZcutClipOperations.exe (1.24 MB)
• CamE_ZcutCornersHandling.exe (1.83 MB)
• CamE_ZcutDiff.exe (370.00 KB)
• MSSmartMesh.exe (260.59 KB)
• 7za.exe (1.01 MB)
• AltovaXML.exe (8.28 MB)
• RunExcelMacro.exe (27.00 KB)
• gabiswengine.exe (22.27 MB)
• LocalSldService.exe (20.39 KB)
• propertyManagerUpload.exe (242.89 KB)
• setcatenv.exe (35.42 KB)
• sldbgproc.exe (77.39 KB)
• SLDEXITAPP.exe (1.38 MB)
• sldphotoshopcon.exe (85.89 KB)
• sldProcMon.exe (1.37 MB)
• sldSettingsAdmin.exe (234.39 KB)
• sldShellExtServer.exe (94.89 KB)
• SldToolboxConfigure.exe (8.77 MB)
• sldtoolboxupdater.exe (600.39 KB)
• sldworks.exe (1,013.39 KB)
• sldworks_fs.exe (311.39 KB)
• swShellFileLauncher.exe (361.89 KB)
• testconsole.exe (38.89 KB)
• UtlReportViewer.exe (231.39 KB)
• x264.exe (11.96 MB)
• pidcollector.exe (24.00 KB)
• innovahxreg.exe (61.54 KB)
• driveworksxpressdt.exe (15.50 KB)
• efdsolver.exe (3.21 MB)
• ffmpeg.exe (17.74 MB)
• swactwiz.exe (11.34 MB)
• swactwizhelpersc.exe (3.76 MB)
• swactwiz_s.exe (11.34 MB)
• swinstactsvc.exe (1.52 MB)
• swlicservinst.exe (361.89 KB)
• swinstactsvc.exe (1.15 MB)
• cwanalysisproc.exe (77.39 KB)
• cwmeshproc.exe (30.89 KB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• star.exe (14.56 MB)
• sldBenchmark.exe (3.99 MB)
• PropertyTabBuilder.exe (991.00 KB)
• sldrx.exe (2.29 MB)
• sldrxmm.exe (136.89 KB)
• sldimport.exe (220.50 KB)
• cnextmproc.exe (19.35 KB)
• spaxchildconnect.exe (22.32 KB)
• spaxchildprocess.exe (19.32 KB)
• spaxchilduconnectacis.exe (22.32 KB)
• spaxchilduconnectcgm.exe (21.82 KB)

...click to view all...

This info is about SolidCAM2019 version 19.00.0 only. Click on the links below for other SolidCAM2019 versions:

• 19.2.5
• 19.2.6
• 19.2.1
• 19.2.2
• 19.2.7
• 19.2.0
• 19.2.8
• 19.1.0
• 18.00.0
• 19.2.4

...click to view all...
If you are manually uninstalling SolidCAM2019 we suggest you to verify if the following data is left behind on your PC.

You should delete the folders below after you uninstall SolidCAM2019:

• C:\@WIN\SOFTWARES\SOLID WORKS

Generally, the following files are left on disk:

• C:\@WIN\SOFTWARES\SOLID WORKS\Documentation\Gpptool.chm
• C:\@WIN\SOFTWARES\SOLID WORKS\Documentation\scmill.chm
• C:\@WIN\SOFTWARES\SOLID WORKS\Documentation\scturn.chm
• C:\@WIN\SOFTWARES\SOLID WORKS\Documentation\scwire.chm
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\AltovaXML.exe
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\AltovaXML.inst
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\boost_regex-vc100-mt-1_47.dll
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool1.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool10.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool11.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool12.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool13.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool14.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool15.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool16.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool17.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool18.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool19.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool2.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool20.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool21.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool22.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool23.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool24.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool25.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool26.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool27.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool28.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool29.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool3.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool30.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool31.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool32.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool33.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool4.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool5.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool6.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool7.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool8.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\AHT_tool9.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\d.xml
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\d_schema.xsd
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\fixture.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\fixture1.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\fixture2.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\fixture3.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ISCAR LOGO.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\main_part.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\parser.csv
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\Sheet_Full_2010_RTF.sps
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\Sheet_Full_2012.sps
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\SolidCAM_logo.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\SW_SC.jpg
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_0.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_1.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_10.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_11.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_12.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_13.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_14.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_15.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_16.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_17.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_18.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_19.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_2.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_20.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_21.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_7.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_8.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_8c.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\mill_type_9.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_0.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_1.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_10.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_11.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_12.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_13.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_14.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_15.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_2.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_3.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_4.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_5.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_6.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_7.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_8.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\DesignFiles\ToolsImages\turn_type_9.png
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\d_schema.xsd
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLS_Excel2003.xls
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLS_Excel2007+.xls
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLS_Simplified_Excel2003.xls
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLSM_Excel2007+.xlsm
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLSM_Excel2010+.xlsm
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Default_XLSM_Simplified_Excel2007+.xlsm
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\More\Default_XLS_csv.xls
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\More\Jernej_XLS_ToolSheet.xls
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\More\Sheet_Full_HTML_Demo.xslt
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\parser.csv
• C:\@WIN\SOFTWARES\SOLID WORKS\Solidcam\_XmlDoc\Files\Sheet_Full_DOCX.xslt

You will find in the Windows Registry that the following data will not be cleaned; remove them one by one using regedit.exe:

• HKEY_CURRENT_USER\Software\SolidCAM\SolidCAM2019
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{B39680F4-E619-41CE-AB68-F8FD0F02CFFC}
• HKEY_LOCAL_MACHINE\Software\SolidCAM\SolidCAM2019

A way to remove SolidCAM2019 with Advanced Uninstaller PRO

SolidCAM2019 is a program marketed by SolidCAM. Frequently, computer users try to remove this program. This is troublesome because doing this by hand takes some know-how regarding PCs. The best QUICK practice to remove SolidCAM2019 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and all around utility to take care of your Windows PC.

DOWNLOAD NOW

• go to Download Link
• download the program by clicking on the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's interface and wealth of features available. Advanced Uninstaller PRO is a very useful package of utilities.

3. Press the General Tools category


4. Press the Uninstall Programs tool


5. All the applications existing on the computer will be shown to you

6. Scroll the list of applications until you find SolidCAM2019 or simply click the Search feature and type in "SolidCAM2019". The SolidCAM2019 program will be found automatically. After you click SolidCAM2019 in the list of applications, the following information regarding the application is shown to you:

• Star rating (in the left lower corner). The star rating explains the opinion other people have regarding SolidCAM2019, from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Technical information regarding the app you want to remove, by clicking on the Properties button.

For instance you can see that for SolidCAM2019:

• The publisher is: www.solidcam.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{B39680F4-E619-41CE-AB68-F8FD0F02CFFC}\setup.exe

7. Click the Uninstall button. A confirmation dialog will appear. Confirm the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will then remove SolidCAM2019.


8. After removing SolidCAM2019, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to start the cleanup. All the items of SolidCAM2019 which have been left behind will be detected and you will be able to delete them. By uninstalling SolidCAM2019 using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your disk.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a recommendation to uninstall SolidCAM2019 by SolidCAM from your PC, nor are we saying that SolidCAM2019 by SolidCAM is not a good application. This page simply contains detailed info on how to uninstall SolidCAM2019 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.