SolidCAM SolidShop Suite 2024.01.39 (x64)

A way to uninstall SolidCAM SolidShop Suite 2024.01.39 (x64) from your PC

This web page contains complete information on how to remove SolidCAM SolidShop Suite 2024.01.39 (x64) for Windows. It is developed by CIMCO. You can read more on CIMCO or check for application updates here. More details about SolidCAM SolidShop Suite 2024.01.39 (x64) can be found at https://www.cimco.com/. Usually the SolidCAM SolidShop Suite 2024.01.39 (x64) program is installed in the C:\Program Files\SolidCAM2024\Solidcam\SolidShop directory, depending on the user's option during setup. SolidCAM SolidShop Suite 2024.01.39 (x64)'s complete uninstall command line is C:\Program Files\SolidCAM2024\Solidcam\SolidShop\unins000.exe. SolidCAM SolidShop Suite 2024.01.39 (x64)'s main file takes around 24.25 MB (25424536 bytes) and is named VC_redist.x64.exe.

SolidCAM SolidShop Suite 2024.01.39 (x64) contains of the executables below. They occupy 515.02 MB (540039568 bytes) on disk.

• unins000.exe (3.56 MB)
• CIMCOEdit.exe (21.69 MB)
• CIMCOSimulation.exe (5.44 MB)
• GroovingKernelWrapper.exe (96.25 KB)
• dotNetFx40_Full_x86_x64.exe (48.11 MB)
• KeyManager.exe (343.24 KB)
• mariadb-dump.exe (4.57 MB)
• mariadb.exe (4.59 MB)
• VC_redist.x64.exe (24.25 MB)
• VC_redist.x86.exe (13.21 MB)
• DNCAdmin.exe (8.54 MB)
• DNCMax.exe (11.57 MB)
• DNCMaxCtrl.exe (2.74 MB)
• DNCMaxServiceManager.exe (6.94 MB)
• DNCServerRestartDaemon.exe (524.74 KB)
• DriverLetterScan.exe (21.74 KB)
• InstallHelper.exe (1.93 MB)
• ProtCitizen.exe (2.37 MB)
• modalrecv.exe (94.50 KB)
• ProtMitsubishi.exe (2.37 MB)
• Agent.exe (1.97 MB)
• bktrans.exe (844.75 KB)
• bktransproc.exe (768.75 KB)
• HeidenhainDCOM.exe (2.86 MB)
• NportSim.exe (394.24 KB)
• QSET2.EXE (115.08 KB)
• node.exe (79.36 MB)
• CreateTable.exe (11.68 MB)
• MDCMax.exe (22.21 MB)
• MDCMaxCMD.exe (22.21 MB)
• wkhtmltopdf.exe (28.84 MB)
• NCBaseBackup.exe (12.05 MB)
• NCBaseConverter.exe (12.11 MB)
• NCBaseMerge.exe (12.11 MB)
• NCBaseServer.exe (12.09 MB)
• mariadb-admin.exe (997.91 KB)
• mariadb-check.exe (4.48 MB)
• mariadb-install-db.exe (3.12 MB)
• mariadb-upgrade.exe (1.15 MB)
• SoftwareManager.exe (800.74 KB)
• LicenseService.exe (340.24 KB)

...click to view all...

The current web page applies to SolidCAM SolidShop Suite 2024.01.39 (x64) version 2024.01.39 only. If you're planning to uninstall SolidCAM SolidShop Suite 2024.01.39 (x64) you should check if the following data is left behind on your PC.

Folders remaining:

• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop

Check for and remove the following files from your disk when you uninstall SolidCAM SolidShop Suite 2024.01.39 (x64):

• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\CIMCOEdit.exe
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\ConfigPaths.cfg
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ActiveDirectoryObjectPicker.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\AdvRenumbering.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Bindings.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\BrowseServers.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\CimcoAD.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\CIMCOSimulation.exe
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\CNCCalc.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\CycleMacro.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\DNCAdmin.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\DNCServerConfig.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\EditorConfig.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\FileDialogs.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\FileDirSelector.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Fileselector.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\glfw3.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\GroovingKernel.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\GroovingKernelWrapper.exe
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\HTKernel.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\HTSimulation.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\iconv-2.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Inspect.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\InspectConvert.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\InspectDll.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libcrypto-3-x64.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libcurl.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libglapi.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\liblzma.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libmariadb.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libssl-3-x64.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\libxml2.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\License.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Localization.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\LoginModuleAD.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\LoginModuleApi.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\LoginModuleCSV.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\LogonDialog.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\MachineConfigurationEditorDll.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\MachineSetup.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Microsoft.Xaml.Behaviors.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\MiscDialogs.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCBaseClient.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCBaseUpgrade.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCConverter.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCConverterNCIReader.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCConverterPost.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_APT.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_deckel.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_emco.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_fagor.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_fanuc.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_heidenhain.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_heidiso.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_hurco.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_iso.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_mach3.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_MazakIntegrex.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_mazakiso.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_millplus.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_nci.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_NUM.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_okuma.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_OSAI.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_robot.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_roeders.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_roedershh.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_siemens.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_simple.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_sodick.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_Thermwood.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_universalheidenhain.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_wire.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ncfilter_xilog.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCFunc.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NCFunc-transf.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\NewMachineConfigurationEditor.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Newtonsoft.Json.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\oci.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Office2016.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\oraociicus.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\osmesa.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\PostProcessor.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\PostProcessorDLL.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ProtocolConfig.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ReversePost.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\SendRecvFile.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\SimDownloader.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\SimulationWindow.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\System.ValueTuple.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ToolList.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\ToolManager.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\Xceed.Wpf.Toolkit.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Dll\zlib1.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceArSa.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceBg.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceCs.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceDa.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceDe.dll
• C:\Program Files\SolidCAM2024\SolidCAM\SolidShop\CIMCOEdit\Msg\External\ToolkitPro.ResourceEl.dll

You will find in the Windows Registry that the following keys will not be removed; remove them one by one using regedit.exe:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\F7B5A02F-ECB1-4CEA-9212-513613EB9F6F_is1

A way to erase SolidCAM SolidShop Suite 2024.01.39 (x64) with Advanced Uninstaller PRO

SolidCAM SolidShop Suite 2024.01.39 (x64) is a program released by CIMCO. Sometimes, computer users choose to erase this application. Sometimes this is efortful because doing this manually takes some experience related to removing Windows programs manually. One of the best SIMPLE solution to erase SolidCAM SolidShop Suite 2024.01.39 (x64) is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, install it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to optimize your system.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by pressing the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire the program's design and number of features available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Press the General Tools category


4. Press the Uninstall Programs feature


5. A list of the applications installed on the PC will appear

6. Scroll the list of applications until you find SolidCAM SolidShop Suite 2024.01.39 (x64) or simply activate the Search field and type in "SolidCAM SolidShop Suite 2024.01.39 (x64)". If it exists on your system the SolidCAM SolidShop Suite 2024.01.39 (x64) application will be found very quickly. Notice that after you select SolidCAM SolidShop Suite 2024.01.39 (x64) in the list of apps, the following data about the application is made available to you:

• Star rating (in the lower left corner). The star rating tells you the opinion other people have about SolidCAM SolidShop Suite 2024.01.39 (x64), from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Technical information about the application you want to remove, by pressing the Properties button.

For example you can see that for SolidCAM SolidShop Suite 2024.01.39 (x64):

• The web site of the program is: https://www.cimco.com/
• The uninstall string is: C:\Program Files\SolidCAM2024\Solidcam\SolidShop\unins000.exe

7. Click the Uninstall button. A confirmation dialog will show up. accept the removal by clicking the Uninstall button. Advanced Uninstaller PRO will uninstall SolidCAM SolidShop Suite 2024.01.39 (x64).


8. After uninstalling SolidCAM SolidShop Suite 2024.01.39 (x64), Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to perform the cleanup. All the items that belong SolidCAM SolidShop Suite 2024.01.39 (x64) which have been left behind will be detected and you will be able to delete them. By removing SolidCAM SolidShop Suite 2024.01.39 (x64) with Advanced Uninstaller PRO, you can be sure that no registry items, files or directories are left behind on your computer.

Your computer will remain clean, speedy and ready to take on new tasks.

Disclaimer

This page is not a recommendation to remove SolidCAM SolidShop Suite 2024.01.39 (x64) by CIMCO from your PC, we are not saying that SolidCAM SolidShop Suite 2024.01.39 (x64) by CIMCO is not a good application for your computer. This page only contains detailed info on how to remove SolidCAM SolidShop Suite 2024.01.39 (x64) supposing you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.