Slicer for Fusion 360

A way to uninstall Slicer for Fusion 360 from your PC

This web page is about Slicer for Fusion 360 for Windows. Below you can find details on how to uninstall it from your computer. The Windows release was created by Autodesk. You can read more on Autodesk or check for application updates here. Click on http://www.SlicerforFusion360.com to get more facts about Slicer for Fusion 360 on Autodesk's website. Slicer for Fusion 360 is usually installed in the C:\Program Files (x86)\Autodesk\Slicer for Fusion 360 folder, depending on the user's decision. Slicer for Fusion 360's complete uninstall command line is C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\Setup\Setup.exe /P {08A640FD-6997-4C08-9191-800ECE8B667E} /M Slicer /LANG en-us. SlicerforFusion360.exe is the Slicer for Fusion 360's primary executable file and it occupies close to 379.95 KB (389072 bytes) on disk.

The following executables are incorporated in Slicer for Fusion 360. They occupy 5.04 MB (5289872 bytes) on disk.

• senddmp.exe (1.84 MB)
• SlicerforFusion360.exe (379.95 KB)
• Setup.exe (958.38 KB)
• AcDelTree.exe (58.88 KB)

This info is about Slicer for Fusion 360 version 1.0.0.0 alone. Several files, folders and Windows registry entries can not be deleted when you want to remove Slicer for Fusion 360 from your computer.

You should delete the folders below after you uninstall Slicer for Fusion 360:

• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360

Check for and remove the following files from your disk when you uninstall Slicer for Fusion 360:

• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\AdWebServices.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\AutoCam.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\boost_chrono-vc110-mt-1_51.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\boost_filesystem-vc110-mt-1_51.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\boost_system-vc110-mt-1_51.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\boost_thread-vc110-mt-1_51.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\CGAL-vc110-mt-4.1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\configurations.xml
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\iconengines\qsvgicon4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qgif4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qico4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qjpeg4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qmng4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qsvg4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qtga4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\imageformats\qtiff4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libAG.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libBase.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libBoost.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libDataModel.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libDataModelGUI.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libDevIL.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libeay32.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libeay32_Ad_1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libGeometry.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libgmp-10.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libGraphics.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libGUI.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libHaru.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libHistory.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libImage.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libiomp5md.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libMaterials.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libMinizip.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libModeling.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libPacketFile.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libpng15.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libProlog.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libResources.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libSupport.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libTesselation.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libTransaction.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libUI.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\libZlib.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\log4cplusU_Ad_1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\mkl_core.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\mkl_intel_thread.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\mkl_p4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\mkl_p4m3.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\other_cgal.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\other_core.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\otherfab_base.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\otherfab_geom.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\phonon4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\plugins\crypto\qca-ossl_Ad_2.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\qca_Ad_2.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\qjson_Ad_0.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\qoauth_Ad_1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtCore_Ad_4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtCore4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtGui4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtNetwork_Ad_4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtNetwork4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtOpenGL4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtScript4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtSvg4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtWebKit4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtXml_Ad_4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtXml4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtXmlPatterns4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\QtXmlPatternsd4.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\SlicerforFusion360.exe
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\ssleay32.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\ssleay32_Ad_1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\WebServices.logconfig
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\xerces-c_3_1.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\zlib.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\CER\client.css
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\CER\exampleDesc.htm
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\CER\img\connecting.gif
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\CER\thankYou.htm
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\en-US\CER\exampleDesc.htm
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\en-US\CER\thankYou.htm
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\en-US\senddmpRes.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\en-US\SetupRes.dll
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\AdskLicense.ini
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Brazilian Portuguese.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Czech.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Dutch.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\English.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\European Portuguese.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\French.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\German.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Hungarian.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Italian.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Japanese.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Korean.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Polish.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Portuguese.txt
• C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\eula\Russian.txt

Registry that is not removed:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\DF046A80799680C4191908E0ECB866E7
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Slicer for Fusion 360

Open regedit.exe in order to remove the following values:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\SlicerforFusion360.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\bin\SlicerforFusion360.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\DF046A80799680C4191908E0ECB866E7\ProductName

A way to remove Slicer for Fusion 360 from your computer with Advanced Uninstaller PRO

Slicer for Fusion 360 is a program offered by the software company Autodesk. Sometimes, people want to remove it. This is efortful because deleting this by hand takes some know-how regarding removing Windows programs manually. One of the best EASY approach to remove Slicer for Fusion 360 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to clean your Windows computer.

DOWNLOAD NOW

• go to Download Link
• download the program by clicking on the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to admire Advanced Uninstaller PRO's design and number of features available. Advanced Uninstaller PRO is a powerful Windows tool.

3. Click on the General Tools button


4. Press the Uninstall Programs tool


5. A list of the programs installed on your PC will appear

6. Navigate the list of programs until you find Slicer for Fusion 360 or simply click the Search field and type in "Slicer for Fusion 360". The Slicer for Fusion 360 application will be found automatically. Notice that when you click Slicer for Fusion 360 in the list of programs, the following data about the application is made available to you:

• Safety rating (in the left lower corner). This explains the opinion other users have about Slicer for Fusion 360, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Technical information about the app you wish to remove, by clicking on the Properties button.

For instance you can see that for Slicer for Fusion 360:

• The publisher is: http://www.SlicerforFusion360.com
• The uninstall string is: C:\Program Files (x86)\Autodesk\Slicer for Fusion 360\Setup\Setup.exe /P {08A640FD-6997-4C08-9191-800ECE8B667E} /M Slicer /LANG en-us

7. Click the Uninstall button. A confirmation window will come up. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will then uninstall Slicer for Fusion 360.


8. After uninstalling Slicer for Fusion 360, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to perform the cleanup. All the items that belong Slicer for Fusion 360 which have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Slicer for Fusion 360 using Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your disk.

Your system will remain clean, speedy and ready to run without errors or problems.

Disclaimer

The text above is not a recommendation to remove Slicer for Fusion 360 by Autodesk from your PC, we are not saying that Slicer for Fusion 360 by Autodesk is not a good software application. This text only contains detailed instructions on how to remove Slicer for Fusion 360 in case you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.