Siemens Totally Integrated Automation Portal V12 Siemens Totally Integrated Automation Portal V12

How to uninstall Siemens Totally Integrated Automation Portal V12 from your system

This page contains detailed information on how to remove Siemens Totally Integrated Automation Portal V12 for Windows. The Windows version was created by Siemens AG. Further information on Siemens AG can be seen here. Please follow if you want to read more on Siemens Totally Integrated Automation Portal V12 on Siemens AG's web page. Usually the Siemens Totally Integrated Automation Portal V12 program is installed in the C:\Program Files\Siemens\Automation\Portal V12 directory, depending on the user's option during install. C:\Program is the full command line if you want to remove Siemens Totally Integrated Automation Portal V12. Siemens Totally Integrated Automation Portal V12's main file takes around 395.50 KB (404992 bytes) and its name is Siemens.Automation.Portal.exe.

The executables below are part of Siemens Totally Integrated Automation Portal V12. They occupy about 6.90 MB (7239041 bytes) on disk.

  • InstallRootCertificate.exe (13.50 KB)
  • OleEditor.exe (71.00 KB)
  • Siemens.Automation.Diagnostics.Report.exe (421.00 KB)
  • Siemens.Automation.Engineering.ObjectModel.Generator.exe (387.50 KB)
  • Siemens.Automation.Generator.Framework.exe (5.50 KB)
  • Siemens.Automation.Manifest.Generator.exe (23.00 KB)
  • Siemens.Automation.MigrationFramework.exe (88.00 KB)
  • Siemens.Automation.ObjectFrame.FileStorage.FileCompressor.exe (15.50 KB)
  • Siemens.Automation.ObjectFrame.FileStorage.FS2XML.exe (24.00 KB)
  • Siemens.Automation.ObjectFrame.FileStorage.Preloader.exe (29.00 KB)
  • Siemens.Automation.ObjectFrame.FileStorage.Server.exe (900.50 KB)
  • Siemens.Automation.ObjectFrame.Generator.Console.exe (32.00 KB)
  • Siemens.Automation.OnlineHelp.Generator.exe (10.00 KB)
  • Siemens.Automation.OnlineHelp.Setup.exe (6.00 KB)
  • Siemens.Automation.OnlineHelp.Viewer.exe (20.00 KB)
  • Siemens.Automation.Portal.exe (395.50 KB)
  • Siemens.Automation.PortalPackageInstaller.exe (393.50 KB)
  • Siemens.Automation.PortalRenderer.exe (141.00 KB)
  • Siemens.Automation.RemoteAccess.s7wtssux.exe (19.00 KB)
  • Siemens.Automation.RemoteAccess.s7wtssvx.exe (151.50 KB)
  • Siemens.Simatic.Hmi.PackNGo.exe (444.00 KB)
  • Siemens.Simatic.Hwcn.Basics.ExternalTasks.exe (6.50 KB)
  • Siemens.Simatic.Hwcn.Interpreter.IG.Gsd.Generator.exe (15.50 KB)
  • Siemens.Simatic.Lang.MergeSysLib.exe (60.00 KB)
  • s7wndxlx.exe (2.32 MB)
  • s7wnfwlx.exe (580.09 KB)
  • HmiSRT.exe (436.22 KB) to view all...

The information on this page is only about version 12 of Siemens Totally Integrated Automation Portal V12. If you are manually uninstalling Siemens Totally Integrated Automation Portal V12 we suggest you to verify if the following data is left behind on your PC.

Folders found on disk after you uninstall Siemens Totally Integrated Automation Portal V12 from your computer:
  • C:\Program Files (x86)\Siemens\Automation\Portal V12

The files below remain on your disk by Siemens Totally Integrated Automation Portal V12's application uninstaller when you removed it:
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\en\Siemens.Simatic.Hwcn.Diagnostic.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\en\Siemens.TechTrace.Controls.ChartControl.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\en\Siemens.TechTrace.Editor.Common.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\en\Siemens.TechTrace.Editor.UserInterface.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\fo\Siemens.Simatic.Hwcn.Diagnostic.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\fo\Siemens.TechTrace.Controls.ChartControl.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\fo\Siemens.TechTrace.Editor.Common.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\fo\Siemens.TechTrace.Editor.UserInterface.resources.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.Simatic.Hwcn.Diagnostic.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.Simatic.Hwcn.Interpreter.IG.Gsd.Generator.exe
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.TechTrace.Controls.ChartControl.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.TechTrace.Editor.Common.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.TechTrace.Editor.Interfaces.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.TechTrace.Editor.Model.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\Siemens.TechTrace.Editor.UserInterface.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\bin\TeeChart.dll
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\Acfs\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\ConfigObjectTypes\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\Custom\Diagnostic\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\Custom\LeanBL\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\generic\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\Hwcn\TableTypes\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\UI\Portal.bin
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Data\UI\Portal.fam
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTCrossREFenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTDiagPLCMenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHSP0017001enUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHSP0021001enUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHWC4SIenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHWCAsienUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHWCenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHWCSCenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTHWCSOSTenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTPEgeneralenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTPERefenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTPETeleServenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTSysDiagenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\CTTFTraceEditorenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\DiagPLCMenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorCONNenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorCPDiagenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorCPenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorDiapuenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorDiaRepenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorHWCNDiagenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorHWCNenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorNETenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorOAMenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorPCCPDiagenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorPEMigenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorPETeleServenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ErrorPNFunctionsenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\HSP0004001MainenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\HWC2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\HWCDiagenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\HWCMainenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\LanguageInfo.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\MenuDiagPLCMenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\MenuHWCNenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\MenuPETeleServenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEDevRefenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEGetStartMain2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEGlossaryenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEGUI2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEHelp2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEHSPMainenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEInstall2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEIntro2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEMenuenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEMigrationenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEOnline2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEProdOverviewenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PEProject2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\PETeleServenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ProgCPU12002MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\ReadMePE2MenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\SiemensAutomationHelpenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\en-US\TFTraceEditorenUS.chm
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Help\HelpParseInfo.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V11\PrintingSysLib.as11
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V11\System\PEData.idx
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V11\System\PEData.plf
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V12\PrintingSysLib.as12
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V12\System\PEData.idx
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\lib\Sys\PrintingSysLib_V12\System\PEData.plf
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\CardReaderService\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Commands\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\DlcManager\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\DomainGrid\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\FeedbackService\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\FolderService\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\FrameApplication\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\FrameApplicationPropertyEditor\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\GenericBrowser\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Global\Automation-CompatibilityCheck-DeploymentIdentifier.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Global\Automation-Edition-DeploymentIdentifier.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Global\Automation-Global-DeploymentIdentifier.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Global\Automation-Settings-DeploymentIdentifier.xml
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\IconService\Simatic.Common.mpk
  • C:\Program Files (x86)\Siemens\Automation\Portal V12\Meta\Model\Simatic.Common.mpk

Use regedit.exe to manually remove from the Windows Registry the keys below:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\Siemens Installer Assistant - TIAP12

How to remove Siemens Totally Integrated Automation Portal V12 using Advanced Uninstaller PRO

Siemens Totally Integrated Automation Portal V12 is an application offered by the software company Siemens AG. Sometimes, computer users try to uninstall this application. This can be efortful because uninstalling this by hand requires some experience regarding Windows internal functioning. One of the best QUICK procedure to uninstall Siemens Totally Integrated Automation Portal V12 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:

1. If you don't have Advanced Uninstaller PRO on your system, install it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to take care of your system.


  • navigate to Download Link
  • download the program by clicking on the green DOWNLOAD NOW button
  • set up Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and wealth of functions available. Advanced Uninstaller PRO is a very useful PC management program.

3. Press the General Tools category
Go to General Tools

4. Activate the Uninstall Programs feature
Go to Uninstall Programs

5. A list of the applications installed on your computer will appear

6. Navigate the list of applications until you find Siemens Totally Integrated Automation Portal V12 or simply activate the Search feature and type in "Siemens Totally Integrated Automation Portal V12". If it is installed on your PC the Siemens Totally Integrated Automation Portal V12 program will be found very quickly. When you click Siemens Totally Integrated Automation Portal V12 in the list of applications, the following information about the program is shown to you:

  • Safety rating (in the lower left corner). This tells you the opinion other users have about Siemens Totally Integrated Automation Portal V12, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Press the Read reviews button.
  • Details about the app you are about to uninstall, by clicking on the Properties button.
For instance you can see that for Siemens Totally Integrated Automation Portal V12:

  • The software company is:
  • The uninstall string is: C:\Program
7. Press the Uninstall button. A confirmation dialog will come up. Confirm the removal by pressing Uninstall. Advanced Uninstaller PRO will uninstall Siemens Totally Integrated Automation Portal V12.
Uninstall Siemens Totally Integrated Automation Portal V12

8. After uninstalling Siemens Totally Integrated Automation Portal V12, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to start the cleanup. All the items of Siemens Totally Integrated Automation Portal V12 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Siemens Totally Integrated Automation Portal V12 with Advanced Uninstaller PRO, you can be sure that no registry items, files or folders are left behind on your computer.

Your system will remain clean, speedy and ready to serve you properly.

Geographical user distribution

  • Windows XP (5.1)
  • Windows 7 (6.1)
  • Windows 8.1 (6.3)
  • Windows 8 (6.2)
  • 10.0
Software Application


This page is not a piece of advice to remove Siemens Totally Integrated Automation Portal V12 by Siemens AG from your PC, we are not saying that Siemens Totally Integrated Automation Portal V12 by Siemens AG is not a good application for your computer. This page only contains detailed info on how to remove Siemens Totally Integrated Automation Portal V12 supposing you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.

2016-06-19 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2016-06-19 16:54:02.310