Siemens NX

How to uninstall Siemens NX from your computer

You can find on this page details on how to remove Siemens NX for Windows. It is written by Siemens. More information on Siemens can be found here. More details about Siemens NX can be seen at http://www.siemens.com/plm. Siemens NX is usually installed in the C:\Program Files\Siemens\NX2007 directory, subject to the user's decision. The full command line for uninstalling Siemens NX is MsiExec.exe /I{D2D0FD15-3214-4A5E-8432-FCDE47B2145F}. Keep in mind that if you will type this command in Start / Run Note you might be prompted for admin rights. Siemens NX's primary file takes around 93.95 KB (96208 bytes) and its name is nxproe.exe.

The executable files below are installed together with Siemens NX. They take about 195.61 MB (205108448 bytes) on disk.

• nxproe.exe (93.95 KB)
• cgm2tiff.exe (31.48 KB)
• nxplot.exe (33.98 KB)
• nxplotadmin.exe (24.45 KB)
• adminprofiles.exe (62.48 KB)
• bpsplot_sdrc.exe (687.48 KB)
• dbmon.exe (17.23 KB)
• gerber.exe (29.98 KB)
• lpr64.exe (52.47 KB)
• mergeit.exe (140.59 KB)
• pamtopnm.exe (17.62 KB)
• pipeoutfile.exe (85.98 KB)
• pm_bps_executor.exe (668.09 KB)
• pnmtops.exe (34.62 KB)
• pnmztopnm.exe (130.48 KB)
• SDIPrintAdmin.exe (648.59 KB)
• sdisubmit.exe (228.05 KB)
• sdi_api.exe (674.09 KB)
• sdi_cgm2gerber.exe (2.44 MB)
• sdi_pm.exe (139.97 KB)
• tifftopnm.exe (37.62 KB)
• winplot.exe (244.04 KB)
• cgm2pdf.exe (233.48 KB)
• nxproe.exe (93.95 KB)
• glslangValidator.exe (838.78 KB)
• Radical.AssetKeysGenerator.exe (9.50 KB)
• Radical.AudioHelper.exe (89.50 KB)
• Radical.CefHelper.exe (6.00 KB)
• Radical.exe (52.44 KB)
• Radical.NetLaunch.exe (23.50 KB)
• Postino.exe (133.50 KB)
• post_builder.exe (96.95 KB)
• ug_clone.exe (26.35 KB)
• PLMXMLViewer.exe (1.41 MB)
• ptb2ss.exe (33.27 KB)
• routing_convert_apv_specifications.exe (35.45 KB)
• routing_convert_specifications.exe (36.48 KB)
• ss2ptb.exe (37.27 KB)
• update_fam_from_ptb.exe (60.48 KB)
• step203ug.exe (23.45 KB)
• step214ug.exe (23.45 KB)
• PublishTDPNative.exe (26.45 KB)
• PublishTDPTeamcenter.exe (27.98 KB)
• ifc.exe (83.45 KB)
• nxacis.exe (88.48 KB)
• step242.exe (44.45 KB)
• wavefrontobj.exe (81.45 KB)
• catiav4.exe (106.45 KB)
• getcid.exe (1.61 MB)
• LicensingTool.exe (15.07 MB)
• lictool.exe (482.94 KB)
• lmtools.exe (1.30 MB)
• lmutil.exe (1.12 MB)
• sentinel_installer.exe (8.01 MB)
• ugraf.exe (26.35 KB)

...click to view all...

This data is about Siemens NX version 20.27.3102.00003 only. You can find below info on other application versions of Siemens NX:

• 19.53.1700.00000
• 19.80.1700.00000
• 18.55.2900.0000

Following the uninstall process, the application leaves some files behind on the PC. Some of these are shown below.

Folders found on disk after you uninstall Siemens NX from your computer:

• C:\Program Files\Siemens\NX2007
• C:\Users\%user%\AppData\Local\Siemens\NX2007

The files below are left behind on your disk when you remove Siemens NX:

• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckFileExistence.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckFileExistence_Customization.dlx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckFileExistence_Customization.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckFileExistence_NXOpen.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckLoadOptions.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckLoadOptions_Customization.dlx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckLoadOptions_Customization.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckLoadOptions_NXOpen.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckRequiredEnvironmentVariables.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckRequiredEnvironmentVariables_Customization.dlx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckRequiredEnvironmentVariables_Customization.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\AutomatedTesting_CheckRequiredEnvironmentVariables_NXOpen.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\NXCheckers.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\application\rbn_automated_testing.rtb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\automated_testing.dfatbl
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckCustomerDefaults.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckFileExistence.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckJTData.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckLoadOptions.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckRequiredEnvironmentVariables.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\dfa\AutomatedTesting_CheckRequiredPartAttributes.dfa
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\automatedtesting_caselog.xsl
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\automatedtesting_checklog.xsl
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\automatedtesting_summary.xsl
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\AutomatedTestingStudio_ENV.bat
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\CheckerLogComparisonFilter.xml
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\CPP\ATS_JournalTest_HelloWorld\ATS_JournalTest_HelloWorld_CPP.cpp
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\CPP\ATS_JournalTest_HelloWorld\ATS_JournalTest_HelloWorld_CPP.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\CPP\ATS_JournalTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\Java\ATS_JournalTest_HelloWorld\ATS_JournalTest_HelloWorld_JAVA.java
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\Java\ATS_JournalTest_HelloWorld\ATS_JournalTest_HelloWorld_JAVA.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\JournalTest\Java\ATS_JournalTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\AtsUnitTestRegister.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CPP\ATS_UnitTest_HelloWorld\ATS_TestFile.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CPP\ATS_UnitTest_HelloWorld\ATS_UnitTest_HelloWorld.cpp
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CPP\ATS_UnitTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CPP\AtsUnitTestTemplate.cpp
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_HelloWorld\ATS_TestFile.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_HelloWorld\ATS_UnitTest_HelloWorld.cs
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_SimpleUDO\ATS_SimpleUDO.cs
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_SimpleUDO\ATS_UnitTest_SimpleUDO.cs
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\ATS_UnitTest_SimpleUDO\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\AtsUnitTestTemplate.cs
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\CSharp\RegisterAtsUnitTest.cs
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\ATS_UnitTest_HelloWorld\MANIFEST.MF
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\ATS_UnitTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\ATS_UnitTest_HelloWorld\Test\ATS_TestFile.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\ATS_UnitTest_HelloWorld\Test\ATS_UnitTest_HelloWorld.java
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\AtsUnitTestTemplate\Business\Color.java
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\AtsUnitTestTemplate\Business\ProvideArguments.java
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\AtsUnitTestTemplate\MANIFEST.MF
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Java\AtsUnitTestTemplate\Test\AtsUnitTestTemplate.java
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HelloWorld\ATS_TestFile.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HelloWorld\ATS_UnitTest_HelloWorld.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HighEndRendering\ATS_HighEndBulkRendering.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HighEndRendering\ATS_HighEndSingleFrameRendering.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HighEndRendering\ATS_UnitTest_HighEndRendering.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\ATS_UnitTest_HighEndRendering\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\Python\AtsUnitTestTemplate.py
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_CreateNote\ATS_CopyNote.prt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_CreateNote\ATS_CreateNote.vb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_CreateNote\ATS_UnitTest_CreateNote.vb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_CreateNote\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_HelloWorld\ATS_TestFile.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_HelloWorld\ATS_UnitTest_HelloWorld.vb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\ATS_UnitTest_HelloWorld\readme.txt
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\AtsUnitTestTemplate.vb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\examples\UnitTest\VB\RegisterAtsUnitTest.vb
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckCustomerDefaults.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckFileExistence.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckJTData.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckLoadOptions.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckRequiredEnvironmentVariables.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\AutomatedTesting_CheckRequiredPartAttributes.html
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\braz_portuguese\nx_automated_testing_braz_portuguese.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\czech\nx_automated_testing_czech.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\french\nx_automated_testing_french.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\german\nx_automated_testing_german.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\italian\nx_automated_testing_italian.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\japanese\nx_automated_testing_japanese.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\korean\nx_automated_testing_korean.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\polish\nx_automated_testing_polish.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\russian\nx_automated_testing_russian.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\simpl_chinese\nx_automated_testing_simpl_chinese.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\spanish\nx_automated_testing_spanish.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\localization\trad_chinese\nx_automated_testing_trad_chinese.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\manifest\automated_testing_env.dat
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\manifest\nx_automated_testing_core.cmf
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\manifest\nx_automated_testing_ui.cmf
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\nx_automated_testing.dpx
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\python\AtsUnitTest.pyc
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\schema\AutomatedTestCaseSchema.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\schema\AutomatedTestCaseSchema-2.0.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\schema\automatedtesting_log.xsd
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\schema\AutomatedTestSuiteSchema.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\schema\AutomatedUnitTestCaseSchema.json
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\startup\definitions_automated_testing.btn
• C:\Program Files\Siemens\NX2007\AUTOMATED_TESTING\tools\ATSUnitTestWizardCS.vsix

Generally the following registry keys will not be removed:

• HKEY_CURRENT_USER\Software\Siemens\NX 2007
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\51DF0D2D4123E5A44823CFED742B41F5
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{D2D0FD15-3214-4A5E-8432-FCDE47B2145F}
• HKEY_LOCAL_MACHINE\Software\Siemens\NX 2007
• HKEY_LOCAL_MACHINE\Software\Wow6432Node\Siemens\NX 2007

Use regedit.exe to delete the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\Siemens\NX2007\UGII\ugraf.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\Siemens\NX2007\UGII\ugraf.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\51DF0D2D4123E5A44823CFED742B41F5\ProductName
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\Siemens\NX2007\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{D2D0FD15-3214-4A5E-8432-FCDE47B2145F}\

How to remove Siemens NX from your PC with the help of Advanced Uninstaller PRO

Siemens NX is a program by Siemens. Sometimes, people want to erase this program. Sometimes this is efortful because performing this manually requires some know-how related to removing Windows applications by hand. One of the best EASY action to erase Siemens NX is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and all around utility to optimize your computer.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to admire the program's design and number of functions available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Click on the General Tools category


4. Activate the Uninstall Programs button


5. All the applications existing on your computer will be shown to you

6. Scroll the list of applications until you find Siemens NX or simply click the Search feature and type in "Siemens NX". If it exists on your system the Siemens NX app will be found automatically. Notice that after you click Siemens NX in the list of programs, some information regarding the program is shown to you:

• Star rating (in the left lower corner). This tells you the opinion other people have regarding Siemens NX, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details regarding the app you want to remove, by pressing the Properties button.

For example you can see that for Siemens NX:

• The publisher is: http://www.siemens.com/plm
• The uninstall string is: MsiExec.exe /I{D2D0FD15-3214-4A5E-8432-FCDE47B2145F}

7. Click the Uninstall button. A confirmation window will appear. Confirm the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will automatically remove Siemens NX.


8. After uninstalling Siemens NX, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of Siemens NX which have been left behind will be found and you will be asked if you want to delete them. By removing Siemens NX with Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your system.

Your PC will remain clean, speedy and able to take on new tasks.

Disclaimer

This page is not a recommendation to remove Siemens NX by Siemens from your PC, we are not saying that Siemens NX by Siemens is not a good application for your computer. This page only contains detailed instructions on how to remove Siemens NX in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.