SOLIDWORKS 2024 SP0.1

How to uninstall SOLIDWORKS 2024 SP0.1 from your PC

SOLIDWORKS 2024 SP0.1 is a Windows application. Read below about how to uninstall it from your computer. It is produced by SolidWorks Corporation. Take a look here where you can read more on SolidWorks Corporation. Detailed information about SOLIDWORKS 2024 SP0.1 can be found at http://www.solidworks.com. The application is usually found in the C:\Program Files\SOLIDWORKS Corp directory (same installation drive as Windows). The full command line for removing SOLIDWORKS 2024 SP0.1 is C:\WINDOWS\SolidWorks\IM_20240-40001-1100-100 (6)\sldim\sldIM.exe. Keep in mind that if you will type this command in Start / Run Note you might get a notification for admin rights. SLDWORKS.exe is the SOLIDWORKS 2024 SP0.1's primary executable file and it takes around 686.32 KB (702792 bytes) on disk.

SOLIDWORKS 2024 SP0.1 is comprised of the following executables which occupy 266.68 MB (279632856 bytes) on disk:

• eDrawingOfficeAutomator.exe (3.31 MB)
• eDrawings.exe (2.29 MB)
• edRemoteWindow.exe (2.35 MB)
• EModelViewer.exe (238.32 KB)
• DsgnChkRptView.exe (271.32 KB)
• gabiswengine.exe (22.27 MB)
• LocalSldService.exe (24.82 KB)
• mg-tetra.exe (100.39 KB)
• propertyManagerUpload.exe (247.32 KB)
• RTLibraryManager.exe (6.96 MB)
• SldBatchUploadPreprocessor.exe (405.82 KB)
• sldbgproc.exe (79.32 KB)
• sldCostingTemplateEditorAppU.exe (492.32 KB)
• SLDEXITAPP.exe (1.26 MB)
• sldProcMon.exe (1.49 MB)
• sldSettingsAdmin.exe (268.82 KB)
• SldToolboxConfigure.exe (9.13 MB)
• sldtoolboxupdater.exe (621.32 KB)
• SLDWORKS.exe (686.32 KB)
• sldworks_fs.exe (314.32 KB)
• swShellFileLauncher.exe (359.32 KB)
• swspmanager.exe (134.82 KB)
• testconsole.exe (40.82 KB)
• UtlReportViewer.exe (234.82 KB)
• x264.exe (11.96 MB)
• pidcollector.exe (24.00 KB)
• innovahxreg.exe (61.54 KB)
• circuitworks.exe (967.50 KB)
• driveworksxpressdt.exe (15.50 KB)
• Dsgnchkbldu.exe (2.19 MB)
• DsgnChkDesignBinderu.exe (245.50 KB)
• efdsolver.exe (1.36 MB)
• ffmpeg.exe (19.68 MB)
• myproducts.exe (2.00 MB)
• copyoptwiz.exe (6.00 MB)
• swactwiz.exe (10.94 MB)
• swactwizhelpersc.exe (3.76 MB)
• swactwiz_s.exe (10.94 MB)
• swinstactsvc.exe (1.67 MB)
• swlicservinst.exe (365.71 KB)
• check.exe (196.29 KB)
• check_net.exe (559.90 KB)
• cos2abq.exe (1.79 MB)
• cos2ans.exe (1.59 MB)
• cos2nas.exe (2.04 MB)
• cos2pat.exe (1.56 MB)
• cos2xds.exe (1.46 MB)
• cwanalysisproc.exe (105.82 KB)
• cwbcbfmesh.exe (86.32 KB)
• cwmeshproc.exe (46.32 KB)
• dpost.exe (1.47 MB)
• dstar.exe (2.61 MB)
• fat.exe (2.29 MB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• hstar.exe (2.81 MB)
• ids2cos.exe (1.84 MB)
• nstar.exe (726.32 KB)
• pre1.exe (38.32 KB)
• renum.exe (38.32 KB)
• SOLIDWORKS Simulation Network Share.exe (1.39 MB)
• star.exe (16.37 MB)
• stopt.exe (558.32 KB)
• stres.exe (1.46 MB)
• sysinf.exe (137.90 KB)
• smatoctoscaservermain.exe (121.03 KB)
• SMATrtOptResExportTool.exe (109.53 KB)
• SMATrtOptResImportTool.exe (108.53 KB)
• SMATrtOptResInfo.exe (120.03 KB)
• smatrttstructsmoothmain.exe (89.53 KB)
• smatsocosmosjobchecker.exe (92.53 KB)
• smatsocosmossetlc.exe (96.53 KB)
• smatsofeminclude.exe (128.53 KB)
• smatsofemmodif.exe (138.03 KB)
• smatsofemtoonf.exe (125.03 KB)
• smatsorestovtm.exe (127.03 KB)
• smatsotoscaopt.exe (78.03 KB)
• smatsotoscaprep.exe (87.53 KB)
• smatsotoscapython.exe (28.53 KB)
• python.exe (100.77 KB)
• pythonw.exe (99.27 KB)
• cosmossupporttool.exe (249.29 KB)
• material.exe (345.27 KB)
• simulation cleaning utility.exe (390.32 KB)
• sldBenchmark.exe (4.18 MB)
• PropertyTabBuilder.exe (1.29 MB)
• GtReportManager.exe (294.00 KB)
• sldimport.exe (223.00 KB)
• cnextmproc.exe (23.03 KB)
• spaxchildconnect.exe (25.78 KB)
• spaxchildprocess.exe (22.77 KB)
• spaxchilduconnectacis.exe (25.78 KB)
• spaxchilduconnectcgm.exe (25.27 KB)
• spaxchilduconnectps.exe (25.27 KB)
• DTSCoordinatorService.exe (81.32 KB)
• DTSMonitor.exe (993.32 KB)
• DTSServiceManager.exe (24.82 KB)
• swboengine.exe (4.01 MB)
• swScheduler.exe (6.78 MB)
• drawcompare.exe (237.29 KB)
• swxdesktophelper.exe (157.32 KB)
• PresentationStudioThemeEditor.exe (2.38 MB)
• DatabaseConverter.exe (50.82 KB)
• sldsetdocprop.exe (11.27 MB)
• UpdateBrowserDatabase.exe (625.82 KB)
• Treehouse.exe (2.98 MB)
• composerplayer.exe (25.25 MB)
• composersfx.exe (621.98 KB)
• composersfx.exe (517.98 KB)
• swinstactsvc.exe (1.28 MB)
• OfflineRenderer.exe (31.82 KB)
• OfflineRendererConsole.exe (30.32 KB)
• SLDWORKSVisualize.exe (137.82 KB)

...click to view all...

This info is about SOLIDWORKS 2024 SP0.1 version 32.0.1.4 only. Following the uninstall process, the application leaves leftovers on the computer. Some of these are listed below.

Folders that were found:

• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager
• C:\Program Files (x86)\Common Files\SOLIDWORKS Shared
• C:\Users\%user%\AppData\Local\SolidWorks
• C:\Users\%user%\AppData\Local\Temp\SOLIDWORKS

Usually, the following files remain on disk:

• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\32.0\sldimdownloader.exe
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\32.0\xceedzip.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\chinese\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\chinese\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\chinese-simplified\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\chinese-simplified\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\czech\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\czech\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\english\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\english\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\french\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\french\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\german\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\german\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\italian\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\italian\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\japanese\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\japanese\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\korean\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\korean\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\polish\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\polish\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\portuguese-brazilian\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\portuguese-brazilian\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\russian\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\russian\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\spanish\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\spanish\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\turkish\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\lang\turkish\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\sldBgDwld.exe
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\xceedzip.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\eula.htm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\sldadminoptioneditorresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\sldim_download.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese\sldIMresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\eula.htm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\sldadminoptioneditorresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\sldim_download.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\chinese-simplified\sldIMresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\eula.htm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\install_guide.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\sldadminoptioneditorresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\sldBgDwldresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\sldim_download.chm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\czech\sldIMresu.dll
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\eula.htm
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\frameset.html
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\framesetstartup.html
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\header.html
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard1.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard10.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard11.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard12.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard13.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard14.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard15.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard16.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard2.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard3.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard4.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard5.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard6.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard7.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard8.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\billboard9.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\back.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\cancel.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\download.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\download_install.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\finish.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\help.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\install.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\next.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\pencilbutton.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\pencilbutton_disabled.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\pencilbutton_rollover.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\repair.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\buttons\retry_download.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\close.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\collapsible.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\diag-green-check.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\diag-red-x.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\expandable.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\footerbackground.jpg
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\grad.gif
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\i_imalert_32.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\icon_error.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\icon_info.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\icon_warning.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\info.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\installoptions_background.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\minus_tree.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\not_yet_attempted.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\placeholder.png
• C:\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\CheckForUpdates\lang\english\html\images\plus_tree.png

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Common Files|SOLIDWORKS Shared|DwgDocumentMgrNET4.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|api|redist|SolidWorks.Interop.cosworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|sldxps.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|SolidWorks.MacroBuilder.dll
• HKEY_CLASSES_ROOT\SOLIDWORKS Installation Manager
• HKEY_CLASSES_ROOT\SolidWorks.EvaluateGraphicsClient.24
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.CentroidPoint
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaAssembly
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaComputation
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaContributor
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaMeasurement
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaPart
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaSubAssembly
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaToleranceAnalysis
• HKEY_CLASSES_ROOT\SolidWorks.ToleranceAnalysisMinMax.TaTrace
• HKEY_CLASSES_ROOT\SolidWorks.VstaMacroBuilder
• HKEY_CURRENT_USER\Software\Dassault Systemes\SolidWorks Shared
• HKEY_CURRENT_USER\Software\SolidWorks
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\2FD1669E0B1EF324FBAFA1E60F1B03B7
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\682A28BFC66BBF644B567AA93A84C6D1
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\876202D57965EB544BFD2380BEEF4851
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\9F3C6F0A7B7044343A32D914BF8AEE6C
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BCA2E6AC6494A274A9C6F8C49F467D80
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BF466C9A76F55D749B9A78ACE067C2D7
• HKEY_LOCAL_MACHINE\Software\FLEXlm License Manager\SolidWorks Flexnet Server
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\SolidWorks Installation Manager 20240-40001-1100-100
• HKEY_LOCAL_MACHINE\Software\SolidWorks
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\EventLog\SOLIDWORKS-DTS
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Flexnet Server
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service

Supplementary registry values that are not removed:

• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|api|redist|SolidWorks.Interop.cosworks.dll\SolidWorks.Interop.cosworks,Version="32.0.1.4",Culture="neutral",FileVersion="32.0.1.4",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Assemblies\E:|App|Solid Work|SOLIDWORKS|SolidWorks.MacroBuilder.dll\SolidWorks.MacroBuilder,Version="32.0.1.4",Culture="neutral",FileVersion="32.0.1.4",ProcessorArchitecture="MSIL"
• HKEY_CLASSES_ROOT\Installer\Features\2FD1669E0B1EF324FBAFA1E60F1B03B7\SolidWorks
• HKEY_CLASSES_ROOT\Installer\Features\BF466C9A76F55D749B9A78ACE067C2D7\SolidWorks
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\SolidWorks_Flexnet_Server\server_install.bat.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Users\UserName\AppData\Local\Temp\SOLIDWORKS\Installation Manager Data\Remove_20240-40001-1100\sldIM.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Users\UserName\AppData\Local\Temp\SOLIDWORKS\Installation Manager Data\Remove_20240-40001-1100\sldIM.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\2FD1669E0B1EF324FBAFA1E60F1B03B7\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\682A28BFC66BBF644B567AA93A84C6D1\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\876202D57965EB544BFD2380BEEF4851\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\9F3C6F0A7B7044343A32D914BF8AEE6C\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BCA2E6AC6494A274A9C6F8C49F467D80\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\BF466C9A76F55D749B9A78ACE067C2D7\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2683658124-1811093171-65584026-1001\\Device\HarddiskVolume2\Program Files (x86)\Common Files\SOLIDWORKS Installation Manager\BackgroundDownloading\sldBgDwld.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2683658124-1811093171-65584026-1001\\Device\HarddiskVolume2\Users\UserName\AppData\Local\Temp\SOLIDWORKS\Installation Manager Data\Remove_20240-40001-1100\sldIM.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CoordinatorServiceHost\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\ewserver\DisplayName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\ewserver\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\MSSQL$TEW_SQLEXPRESS\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteSolverDispatcher\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Flexnet Server\DisplayName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Flexnet Server\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\Description
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\DisplayName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SolidWorks Licensing Service\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SQLAgent$TEW_SQLEXPRESS\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SQLTELEMETRY$TEW_SQLEXPRESS\ImagePath

How to remove SOLIDWORKS 2024 SP0.1 from your computer with the help of Advanced Uninstaller PRO

SOLIDWORKS 2024 SP0.1 is an application marketed by the software company SolidWorks Corporation. Some users choose to remove it. This can be troublesome because uninstalling this manually takes some advanced knowledge regarding Windows internal functioning. The best QUICK approach to remove SOLIDWORKS 2024 SP0.1 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, add it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and all around utility to take care of your PC.

DOWNLOAD NOW

• visit Download Link
• download the program by clicking on the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to get familiar with the program's design and wealth of features available. Advanced Uninstaller PRO is a powerful package of utilities.

3. Click on the General Tools category


4. Activate the Uninstall Programs tool


5. All the programs existing on the PC will appear

6. Navigate the list of programs until you find SOLIDWORKS 2024 SP0.1 or simply click the Search feature and type in "SOLIDWORKS 2024 SP0.1". If it is installed on your PC the SOLIDWORKS 2024 SP0.1 application will be found very quickly. After you select SOLIDWORKS 2024 SP0.1 in the list , some data regarding the program is made available to you:

• Star rating (in the lower left corner). This tells you the opinion other users have regarding SOLIDWORKS 2024 SP0.1, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details regarding the application you are about to remove, by clicking on the Properties button.

For instance you can see that for SOLIDWORKS 2024 SP0.1:

• The web site of the application is: http://www.solidworks.com
• The uninstall string is: C:\WINDOWS\SolidWorks\IM_20240-40001-1100-100 (6)\sldim\sldIM.exe

7. Press the Uninstall button. A confirmation page will show up. accept the uninstall by clicking Uninstall. Advanced Uninstaller PRO will then remove SOLIDWORKS 2024 SP0.1.


8. After uninstalling SOLIDWORKS 2024 SP0.1, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to perform the cleanup. All the items of SOLIDWORKS 2024 SP0.1 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling SOLIDWORKS 2024 SP0.1 using Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your computer.

Your system will remain clean, speedy and able to serve you properly.

Disclaimer

The text above is not a recommendation to remove SOLIDWORKS 2024 SP0.1 by SolidWorks Corporation from your PC, we are not saying that SOLIDWORKS 2024 SP0.1 by SolidWorks Corporation is not a good application for your PC. This text only contains detailed instructions on how to remove SOLIDWORKS 2024 SP0.1 in case you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.