SIECA 132 Multithreaded API - V7.4.36.0

A guide to uninstall SIECA 132 Multithreaded API - V7.4.36.0 from your PC

SIECA 132 Multithreaded API - V7.4.36.0 is a software application. This page is comprised of details on how to uninstall it from your computer. It was developed for Windows by Sontheim Industrie Elektronik GmbH. You can read more on Sontheim Industrie Elektronik GmbH or check for application updates here. More details about the app SIECA 132 Multithreaded API - V7.4.36.0 can be found at www.s-i-e.de. Usually the SIECA 132 Multithreaded API - V7.4.36.0 application is placed in the C:\Program Files (x86)\Sontheim\MT_Api folder, depending on the user's option during setup. The full command line for removing SIECA 132 Multithreaded API - V7.4.36.0 is MsiExec.exe /I{78BC413D-B2F5-4026-A503-95D4C6EC6C01}. Note that if you will type this command in Start / Run Note you may get a notification for administrator rights. SIECA 132 Multithreaded API - V7.4.36.0's primary file takes around 60.00 KB (61440 bytes) and its name is SIECA132Switcher.exe.

The following executable files are contained in SIECA 132 Multithreaded API - V7.4.36.0. They take 2.18 MB (2287160 bytes) on disk.

• SIECA132Switcher.exe (60.00 KB)
• SIECE132.exe (328.00 KB)
• TraceRunner.exe (40.00 KB)
• DPInst64.exe (913.55 KB)
• SIECAREG.exe (52.00 KB)
• SIECATEST.exe (172.00 KB)
• SIECE132Svr.exe (60.00 KB)
• MT_APISW.exe (176.00 KB)
• KillPP.exe (64.00 KB)

...click to view all...

The information on this page is only about version 7.04.3600 of SIECA 132 Multithreaded API - V7.4.36.0. Following the uninstall process, the application leaves leftovers on the computer. Some of these are shown below.

Folders found on disk after you uninstall SIECA 132 Multithreaded API - V7.4.36.0 from your computer:

• C:\Program Files (x86)\Sontheim\MT_Api

The files below were left behind on your disk when you remove SIECA 132 Multithreaded API - V7.4.36.0:

• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\18112005.pub
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\CanApi2.dll
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\DIFx-License.txt
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\DPInst64.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanFox\Firmware\Curtis\canfox_1.M.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanFox\Firmware\IFM\canfox_1.M.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanFox232\Firmware\Curtis\canfox_1.M.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanFox232\Firmware\IFM\canfox_1.M.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanKLine\Firmware\siecankline_v1.H.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanKLine\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanKLine\sie_usb20_64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanKLine\sie_usb20_64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanKLine\sie_usb20_64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\Firmware\CANUSB_V2903.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\Firmware\CANUSB_V3A02_Curtis_V4304_Page2.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\Firmware\CANUSB_V3A03.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\Firmware\CANUSB_V4504.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\SieUsb64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\SieUsb64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB\SieUsb64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB20\Firmware\mobican_1.O.0.0.hex
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB20\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB20\sie_usb20_64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB20\sie_usb20_64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSB20\sie_usb20_64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBVH\Firmware\CANUSB_V4904.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBVH\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBVH\SieUsb64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBVH\SieUsbVH64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBVH\SieUsbVH64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBx4\Firmware\CANUSB2x4_V5000.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBx4\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBx4\Sie2x4Usb64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBx4\Sie2x4Usb64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\CanUSBx4\SieUsb64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\Firmware\Rev0\com168_app_v0.B0.0.0.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\Firmware\Rev0\com168v2_fpga_v0102.srec
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\Firmware\Rev1\com168_app_v0.B0.0.0.S19
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\Firmware\Rev1\com168v2_fpga_v0106.srec
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\Reinstall.bat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\SIEPowerCanPciII64.cat
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\SIEPowerCanPciII64.inf
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\PowerPCIv2\SIEPowerCanPciII64.sys
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Driver\STCanAPI_GlueLayer\canapi.dll
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\PlxApi631.dll
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\ReadMe.txt
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\SIECA132.DLL
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\SIECAREG.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\SIECATEST.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\SIECE132.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\SIECE132Svr.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Switcher\MDT_Search+Install.dll
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Switcher\MT_APISW.exe
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\Switcher\SIESW.msi
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\TraceLib.dll
• C:\Program Files (x86)\Sontheim\MT_Api\7.4.36.0\TraceRunner.exe
• C:\Program Files (x86)\Sontheim\MT_Api\SiE_usb.dll
• C:\Users\%user%\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\R5FQNWYJ\SIECA-132-Multithreaded-API---V7_4_43_0-87748045bb12c04891a0164ab14e2618-application[1].htm
• C:\Windows\Installer\{78BC413D-B2F5-4026-A503-95D4C6EC6C01}\MT_API.ico

Use regedit.exe to manually remove from the Windows Registry the keys below:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\D314CB875F2B62045A30594D6CCEC610
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{78BC413D-B2F5-4026-A503-95D4C6EC6C01}

Registry values that are not removed from your computer:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Sontheim\MT_Api\SIECE132.exe
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\D314CB875F2B62045A30594D6CCEC610\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SIECE132Svr_V7.04.3600\ImagePath

A way to erase SIECA 132 Multithreaded API - V7.4.36.0 using Advanced Uninstaller PRO

SIECA 132 Multithreaded API - V7.4.36.0 is an application released by the software company Sontheim Industrie Elektronik GmbH. Some computer users decide to erase it. This can be hard because uninstalling this manually takes some know-how regarding PCs. The best SIMPLE procedure to erase SIECA 132 Multithreaded API - V7.4.36.0 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, add it. This is a good step because Advanced Uninstaller PRO is one of the best uninstaller and all around utility to take care of your Windows computer.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to get familiar with the program's design and wealth of functions available. Advanced Uninstaller PRO is a powerful system optimizer.

3. Click on the General Tools category


4. Click on the Uninstall Programs button


5. A list of the programs existing on your computer will be made available to you

6. Scroll the list of programs until you find SIECA 132 Multithreaded API - V7.4.36.0 or simply activate the Search feature and type in "SIECA 132 Multithreaded API - V7.4.36.0". If it is installed on your PC the SIECA 132 Multithreaded API - V7.4.36.0 application will be found very quickly. When you select SIECA 132 Multithreaded API - V7.4.36.0 in the list of apps, some data regarding the program is shown to you:

• Star rating (in the left lower corner). This explains the opinion other people have regarding SIECA 132 Multithreaded API - V7.4.36.0, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Click on the Read reviews button.
• Technical information regarding the application you wish to remove, by clicking on the Properties button.

For instance you can see that for SIECA 132 Multithreaded API - V7.4.36.0:

• The web site of the application is: www.s-i-e.de
• The uninstall string is: MsiExec.exe /I{78BC413D-B2F5-4026-A503-95D4C6EC6C01}

7. Click the Uninstall button. A confirmation window will come up. Confirm the removal by clicking Uninstall. Advanced Uninstaller PRO will uninstall SIECA 132 Multithreaded API - V7.4.36.0.


8. After uninstalling SIECA 132 Multithreaded API - V7.4.36.0, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to start the cleanup. All the items that belong SIECA 132 Multithreaded API - V7.4.36.0 which have been left behind will be detected and you will be asked if you want to delete them. By removing SIECA 132 Multithreaded API - V7.4.36.0 with Advanced Uninstaller PRO, you are assured that no registry items, files or directories are left behind on your PC.

Your system will remain clean, speedy and ready to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a piece of advice to uninstall SIECA 132 Multithreaded API - V7.4.36.0 by Sontheim Industrie Elektronik GmbH from your PC, we are not saying that SIECA 132 Multithreaded API - V7.4.36.0 by Sontheim Industrie Elektronik GmbH is not a good application for your PC. This text simply contains detailed info on how to uninstall SIECA 132 Multithreaded API - V7.4.36.0 in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.