SAS Stat Studio 3.1

A way to uninstall SAS Stat Studio 3.1 from your system

You can find below detailed information on how to uninstall SAS Stat Studio 3.1 for Windows. The Windows version was created by SAS. Additional info about SAS can be found here. More information about SAS Stat Studio 3.1 can be seen at http://www.SAS.com. SAS Stat Studio 3.1 is usually set up in the C:\Program Files\SAS\StatStudio\3.1 folder, however this location may vary a lot depending on the user's option when installing the application. The full command line for removing SAS Stat Studio 3.1 is RunDll32. Keep in mind that if you will type this command in Start / Run Note you might be prompted for admin rights. SAS Stat Studio 3.1's primary file takes around 1.92 MB (2016568 bytes) and is named StatStudio.exe.

The executables below are part of SAS Stat Studio 3.1. They occupy about 1.96 MB (2059888 bytes) on disk.

• IMLPlus.exe (42.30 KB)
• StatStudio.exe (1.92 MB)

This info is about SAS Stat Studio 3.1 version 3.1 only. A considerable amount of files, folders and registry data can not be removed when you want to remove SAS Stat Studio 3.1 from your PC.

Directories that were found:

• C:\Program Files\SAS\StatStudio\3.1

The files below remain on your disk by SAS Stat Studio 3.1's application uninstaller when you removed it:

• C:\Program Files\SAS\StatStudio\3.1\Classes\LinearFitPlot.class
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\air.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\baseball.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\business.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\Caribbean.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\CentralAmerica.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\climate.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\drug.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\fish.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\gpa.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\Hurricanes.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\iris.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\mining.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\miningx.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\neuralgia.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\patient.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\prdsale.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\ship.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\Data Sets\states48.sas7bdat
• C:\Program Files\SAS\StatStudio\3.1\install.xml
• C:\Program Files\SAS\StatStudio\3.1\Modules\BlendColors.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\BlendColors.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CalcMachineEpsilon.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CalcMachineEpsilon.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CoefficientPlot.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CoefficientPlot.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCode.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCode.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeLinesByGroups.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeLinesByGroups.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeObs.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeObs.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeObsByGroups.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ColorCodeObsByGroups.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ComputeSymPosDefMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ComputeSymPosDefMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CopyServerDataToDataObject.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CopyServerDataToDataObject.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateFullScatterMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateFullScatterMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateHilbertMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateHilbertMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateInvHilbertMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateInvHilbertMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreatePlotMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreatePlotMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateVandermondeMatrix.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\CreateVandermondeMatrix.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DateTimeToString.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DateTimeToString.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DateToString.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DateToString.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\Define2DGrid.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\Define2DGrid.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\Delay.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\Delay.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DeleteFile.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DeleteFile.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DeleteServerDataSets.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DeleteServerDataSets.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogBrowseForFolder.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogBrowseForFolder.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetDouble.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetDouble.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItem.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItem.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItems.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItems.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItemsEx.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetListItemsEx.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetOpenDataSetFileName.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetOpenDataSetFileName.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetSaveDataSetFileName.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetSaveDataSetFileName.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetString.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogGetString.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogModifyDouble.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoDialogModifyDouble.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoErrorMessageBoxOK.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoErrorMessageBoxOK.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoMessageBoxOK.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoMessageBoxOK.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoMessageBoxYesNo.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DoMessageBoxYesNo.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawInset.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawInset.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawLegend.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawLegend.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawLegendEx.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawLegendEx.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawPolygonsByGroups.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawPolygonsByGroups.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawWaveletLegend.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\DrawWaveletLegend.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\ExecuteOSProgram.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\ExecuteOSProgram.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\GetCurrentDirectory.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\GetCurrentDirectory.sxx
• C:\Program Files\SAS\StatStudio\3.1\Modules\GetGraphAreaDataCoordinates.sxs
• C:\Program Files\SAS\StatStudio\3.1\Modules\GetGraphAreaDataCoordinates.sxx

Registry keys:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{16E9A5ED-B62F-433A-B96A-12FE943AFF1B}
• HKEY_LOCAL_MACHINE\Software\SAS Institute Inc.\Stat Studio

How to delete SAS Stat Studio 3.1 from your PC with Advanced Uninstaller PRO

SAS Stat Studio 3.1 is an application by SAS. Sometimes, users choose to erase this program. This is efortful because performing this by hand requires some knowledge related to Windows internal functioning. One of the best QUICK manner to erase SAS Stat Studio 3.1 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, install it. This is good because Advanced Uninstaller PRO is a very potent uninstaller and all around tool to optimize your Windows PC.

DOWNLOAD NOW

• go to Download Link
• download the setup by clicking on the green DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a powerful package of utilities.

3. Press the General Tools button


4. Activate the Uninstall Programs tool


5. A list of the programs existing on your computer will be shown to you

6. Navigate the list of programs until you locate SAS Stat Studio 3.1 or simply activate the Search feature and type in "SAS Stat Studio 3.1". The SAS Stat Studio 3.1 application will be found very quickly. After you select SAS Stat Studio 3.1 in the list of apps, some information regarding the application is made available to you:

• Star rating (in the lower left corner). The star rating tells you the opinion other users have regarding SAS Stat Studio 3.1, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Technical information regarding the program you are about to uninstall, by clicking on the Properties button.

For instance you can see that for SAS Stat Studio 3.1:

• The software company is: http://www.SAS.com
• The uninstall string is: RunDll32

7. Press the Uninstall button. A confirmation page will come up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will then uninstall SAS Stat Studio 3.1.


8. After uninstalling SAS Stat Studio 3.1, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to go ahead with the cleanup. All the items of SAS Stat Studio 3.1 that have been left behind will be found and you will be able to delete them. By uninstalling SAS Stat Studio 3.1 using Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your PC.

Your computer will remain clean, speedy and able to run without errors or problems.

Geographical user distribution

Disclaimer

This page is not a recommendation to uninstall SAS Stat Studio 3.1 by SAS from your PC, we are not saying that SAS Stat Studio 3.1 by SAS is not a good application for your PC. This text only contains detailed info on how to uninstall SAS Stat Studio 3.1 in case you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.