Publishers

RoboCell for Controller-USB RoboCell for Controller-USB





How to uninstall RoboCell for Controller-USB from your computer

RoboCell for Controller-USB is a computer program. This page is comprised of details on how to uninstall it from your PC. It was developed for Windows by Intelitek. Further information on Intelitek can be seen here. More details about RoboCell for Controller-USB can be found at . RoboCell for Controller-USB is frequently set up in the C:\hethongsxlinhhoat\robocell directory, however this location can vary a lot depending on the user's option when installing the program. The full command line for uninstalling RoboCell for Controller-USB is C:\Program Files (x86)\InstallShield Installation Information\{57A4AF2A-95F4-4ED9-B0A1-B038F9E034BA}\setup.exe. Keep in mind that if you will type this command in Start / Run Note you might get a notification for administrator rights. The program's main executable file is called setup.exe and it has a size of 784.00 KB (802816 bytes).

RoboCell for Controller-USB installs the following the executables on your PC, occupying about 784.00 KB (802816 bytes) on disk.

  • setup.exe (784.00 KB)


The information on this page is only about version 7.0.9.8 of RoboCell for Controller-USB. You can find below info on other releases of RoboCell for Controller-USB:

...click to view all...
Quite a few files, folders and Windows registry entries can be left behind when you are trying to remove RoboCell for Controller-USB from your computer.

Folders found on disk after you uninstall RoboCell for Controller-USB from your PC:
  • C:\Intelitek\RoboCell

The files below are left behind on your disk by RoboCell for Controller-USB when you uninstall it:
  • C:\Intelitek\RoboCell\BIN\_UnInstall.dll
  • C:\Intelitek\RoboCell\BIN\ASRS2_36CONF.INI
  • C:\Intelitek\RoboCell\BIN\ASRS36CONF.INI
  • C:\Intelitek\RoboCell\BIN\C4DLL.DLL
  • C:\Intelitek\RoboCell\BIN\CellSetup.eng
  • C:\Intelitek\RoboCell\BIN\CellSetup.exe
  • C:\Intelitek\RoboCell\BIN\CellSetup.ger
  • C:\Intelitek\RoboCell\BIN\CellSetup.ini
  • C:\Intelitek\RoboCell\BIN\CellSetup.KOR
  • C:\Intelitek\RoboCell\BIN\CellSetup.pol
  • C:\Intelitek\RoboCell\BIN\CellSetup.por
  • C:\Intelitek\RoboCell\BIN\CellSetup.spn
  • C:\Intelitek\RoboCell\BIN\CellSetup.VIT
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\Digits.pnt
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\Digits.SBP
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\DigitsOrg.pnt
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\DigitsOrg.sbp
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\UPPER.PNT
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\upper.SBP
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\UpperOrg.pnt
  • C:\Intelitek\RoboCell\BIN\CHAR\ENG\WELDING\UpperOrg.sbp
  • C:\Intelitek\RoboCell\BIN\Default.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Brc-5axis.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Brc-5axis.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\Brc-6axis.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Brc-6axis.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-3-station.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-3-station.o2b
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-4a-station.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-4a-station.o2b
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-4b-station.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-4b-station.o2b
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-8-station.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\CIM-8-station.o2b
  • C:\Intelitek\RoboCell\BIN\Demo\Er14.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Er14.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\Er2.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Er2.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\Er3DSim.eng
  • C:\Intelitek\RoboCell\BIN\Demo\Er4CellCnc1.3DC
  • C:\Intelitek\RoboCell\BIN\Demo\Er4CellCnc1.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\Er4CellCnc2.3DC
  • C:\Intelitek\RoboCell\BIN\Demo\Er4CellCnc2.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ER4u-Weld.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\ER4u-Weld-Tjoint.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ER4u-Weld-Write.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\Er9.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Er9.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ERSER.INI
  • C:\Intelitek\RoboCell\BIN\Demo\LANGUAGE.INI
  • C:\Intelitek\RoboCell\BIN\Demo\LevelFlowCtrl.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\MicroCIM.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\MicroCIM.o2b
  • C:\Intelitek\RoboCell\BIN\Demo\Mk3.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\Mk3.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\PressureCtrl.3dc
  • C:\Intelitek\RoboCell\BIN\Demo\ProcCtrl-LevelFlow.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ProcCtrl-Pressure.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ProcCtrl-Temper.dmo
  • C:\Intelitek\RoboCell\BIN\Demo\ReadMe.doc
  • C:\Intelitek\RoboCell\BIN\Demo\Simul3D.exe
  • C:\Intelitek\RoboCell\BIN\Demo\TemperCtrl.3dc
  • C:\Intelitek\RoboCell\BIN\Driver\ERUSB.cat
  • C:\Intelitek\RoboCell\BIN\Driver\ERUSB.inf
  • C:\Intelitek\RoboCell\BIN\Driver\ERUSB.sys
  • C:\Intelitek\RoboCell\BIN\Driver\ERUSBClsInst.dll
  • C:\Intelitek\RoboCell\BIN\Er2conf.ini
  • C:\Intelitek\RoboCell\BIN\Er3DSim.eng
  • C:\Intelitek\RoboCell\BIN\Er3DSim.ger
  • C:\Intelitek\RoboCell\BIN\Er3DSim.KOR
  • C:\Intelitek\RoboCell\BIN\Er3DSim.pol
  • C:\Intelitek\RoboCell\BIN\Er3DSim.por
  • C:\Intelitek\RoboCell\BIN\Er3DSim.spn
  • C:\Intelitek\RoboCell\BIN\Er3DSim.VIT
  • C:\Intelitek\RoboCell\BIN\ER4CONF.INI
  • C:\Intelitek\RoboCell\BIN\intelitek.Licensing.dll
  • C:\Intelitek\RoboCell\BIN\LANGUAGE.INI
  • C:\Intelitek\RoboCell\BIN\Licensing.pdf
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\ASRS2_36Ax1.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\ASRS2_36Ax2.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\ASRS2_36Ax3.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\ASRS2_36Ax4.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\CONV24.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\LSB100B.INI
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\LSB100S.INI
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\LSB150S.INI
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\LSB180B.INI
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\LT03.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\MK24_127.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\noc.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\Periph.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\ROB_ASRS2_36u.INI
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\RT24.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\XYT03X.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS2_36u\$Default\XYT03Y.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS36u\$Default\ASRS36Ax1.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS36u\$Default\ASRS36Ax2.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS36u\$Default\ASRS36Ax3.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS36u\$Default\ASRS36Ax4.ini
  • C:\Intelitek\RoboCell\BIN\Par\ASRS36u\$Default\CONV24.ini

You will find in the Windows Registry that the following keys will not be uninstalled; remove them one by one using regedit.exe:
  • HKEY_LOCAL_MACHINE\Software\Intelitek\RoboCell for Controller-USB
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{AEE4678A-65AA-4DCF-801D-3249CE81EBB0}

Open regedit.exe in order to remove the following registry values:
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{9E5B6577-A8BA-4B8C-953F-19BB569F6CFF}C:\intelitek\robocell\bin\scorbase.exe
  • HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{90E76817-403B-4BC6-A6BF-1EF14850F048}C:\intelitek\robocell\bin\scorbase.exe


How to delete RoboCell for Controller-USB with Advanced Uninstaller PRO

RoboCell for Controller-USB is an application offered by Intelitek. Frequently, computer users want to uninstall this program. Sometimes this is difficult because removing this manually takes some know-how related to Windows internal functioning. One of the best SIMPLE manner to uninstall RoboCell for Controller-USB is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, install it. This is good because Advanced Uninstaller PRO is an efficient uninstaller and all around tool to maximize the performance of your computer.

DOWNLOAD NOW

  • navigate to Download Link
  • download the program by clicking on the DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Start Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and number of functions available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Press the General Tools category
Go to General Tools


4. Press the Uninstall Programs tool
Go to Uninstall Programs


5. A list of the applications existing on the computer will be made available to you

6. Scroll the list of applications until you locate RoboCell for Controller-USB or simply click the Search feature and type in "RoboCell for Controller-USB". If it is installed on your PC the RoboCell for Controller-USB program will be found very quickly. Notice that after you select RoboCell for Controller-USB in the list of apps, the following information regarding the application is shown to you:


  • Safety rating (in the left lower corner). This explains the opinion other users have regarding RoboCell for Controller-USB, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other users - Press the Read reviews button.
  • Technical information regarding the app you wish to uninstall, by clicking on the Properties button.
For example you can see that for RoboCell for Controller-USB:





  • The web site of the application is: http://www.intelitek.com
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{57A4AF2A-95F4-4ED9-B0A1-B038F9E034BA}\setup.exe
7. Press the Uninstall button. A confirmation window will show up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will automatically uninstall RoboCell for Controller-USB.
Uninstall RoboCell for Controller-USB


8. After uninstalling RoboCell for Controller-USB, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to go ahead with the cleanup. All the items that belong RoboCell for Controller-USB that have been left behind will be found and you will be able to delete them. By uninstalling RoboCell for Controller-USB with Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your PC.

Your system will remain clean, speedy and ready to serve you properly.

DOWNLOAD NOW


Disclaimer

This page is not a recommendation to uninstall RoboCell for Controller-USB by Intelitek from your computer, nor are we saying that RoboCell for Controller-USB by Intelitek is not a good application for your computer. This text simply contains detailed info on how to uninstall RoboCell for Controller-USB supposing you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2019-08-18 / Written by Andreea Kartman for Advanced Uninstaller PRO

follow @DeeaKartman
Last update on: 2019-08-18 13:14:42.353