Proficy HMI SCADA - iFIX 5.5

A way to uninstall Proficy HMI SCADA - iFIX 5.5 from your system

You can find on this page detailed information on how to remove Proficy HMI SCADA - iFIX 5.5 for Windows. It was developed for Windows by GE Intelligent Platforms. You can read more on GE Intelligent Platforms or check for application updates here. You can read more about about Proficy HMI SCADA - iFIX 5.5 at http://www.ge-ip.com. The program is usually found in the C:\Archivos de programa\Proficy\Proficy iFIX folder (same installation drive as Windows). The full command line for removing Proficy HMI SCADA - iFIX 5.5 is C:\Archivos de programa\InstallShield Installation Information\{8E2D0FDB-EF39-4AE0-A9E8-619E7575A17E}\Setup.exe. Keep in mind that if you will type this command in Start / Run Note you might be prompted for administrator rights. launch.exe is the Proficy HMI SCADA - iFIX 5.5's primary executable file and it takes about 130.38 KB (133504 bytes) on disk.

Proficy HMI SCADA - iFIX 5.5 is composed of the following executables which occupy 20.34 MB (21325971 bytes) on disk:

• aadback.exe (25.38 KB)
• AAMTCP.exe (108.38 KB)
• ADDFONT.EXE (48.68 KB)
• AlmFile.exe (95.38 KB)
• Almhis.exe (234.88 KB)
• Almodbc.exe (129.38 KB)
• AlmODBCConfig.exe (182.38 KB)
• ALMODBCDump.exe (20.88 KB)
• almprin.exe (102.88 KB)
• AlmQDump.exe (29.38 KB)
• almstat.exe (50.38 KB)
• Almsum.exe (72.88 KB)
• Alm_sync.exe (24.88 KB)
• AppValidator.exe (281.88 KB)
• AreaAsTg.exe (38.88 KB)
• BackupRestore.exe (40.38 KB)
• Btkcfg.exe (87.38 KB)
• BTKINIT.exe (26.88 KB)
• CCUpdateWebSpace.exe (37.38 KB)
• ClientAPIState.exe (256.88 KB)
• CLMSMIHandler.exe (64.88 KB)
• CLMWindowsService.exe (18.88 KB)
• ConfigureWizard.exe (92.38 KB)
• CONMGR.exe (114.88 KB)
• CONNECT.exe (26.38 KB)
• ConnectionWait.exe (68.38 KB)
• CreateWindowsGroups.exe (44.88 KB)
• CrossReference.exe (709.88 KB)
• CTALTDEL.EXE (76.68 KB)
• DataBaseManager.exe (989.88 KB)
• DataServerInstaller.exe (29.88 KB)
• DBADIAG.exe (38.88 KB)
• Dbasrv.exe (91.38 KB)
• DBBLOAD.exe (197.38 KB)
• DBBSAVE.exe (197.38 KB)
• Dbcvt.exe (126.88 KB)
• DBExporter.exe (64.88 KB)
• DVKTINST.EXE (80.68 KB)
• Edaquick.exe (49.38 KB)
• ERR2STR.exe (31.38 KB)
• FDKeyMacros.exe (225.88 KB)
• Fix.exe (337.38 KB)
• FixBackgroundServer.exe (140.38 KB)
• FixSchedulerService.exe (140.88 KB)
• FIXSRV.exe (104.38 KB)
• FixTohist.exe (110.38 KB)
• GrantUserFixServiceRights.exe (18.88 KB)
• hhupd.exe (716.16 KB)
• IFIX2IH.exe (64.07 KB)
• iFIXNotificationBG.exe (25.88 KB)
• iFIXNotificationFG.exe (89.88 KB)
• iFixOPCAESrv.exe (319.38 KB)
• ihFIXCollector.exe (611.68 KB)
• IMGLM.EXE (60.68 KB)
• IMGLOGON.EXE (96.68 KB)
• IMGSOUND.EXE (60.68 KB)
• IMGUTIL.EXE (84.68 KB)
• IOCNTRL.exe (131.88 KB)
• IOSCOPE.exe (114.88 KB)
• KeyMacroExporter.exe (29.88 KB)
• launch.exe (130.38 KB)
• LICENSE.EXE (164.68 KB)
• LICENSE2.EXE (164.68 KB)
• LifetimeDebug.exe (70.88 KB)
• ListSIMs.exe (58.88 KB)
• Login.exe (66.88 KB)
• MACROBAT.EXE (60.68 KB)
• Mission.exe (187.88 KB)
• MTS2.EXE (72.68 KB)
• MTSOPEN.EXE (229.63 KB)
• MTSSETUP.EXE (196.68 KB)
• MTSTUTOR.EXE (103.29 KB)
• MYTSOFT.EXE (565.18 KB)
• MYTSOFT2.EXE (72.68 KB)
• NAC.exe (83.38 KB)
• Nacdump.exe (40.38 KB)
• nam.exe (99.38 KB)
• Namdump.exe (41.38 KB)
• Nbastat.exe (22.88 KB)
• Nbdump.exe (22.88 KB)
• Nbsstat.exe (22.88 KB)
• Nbtask.exe (14.38 KB)
• Nbtest.exe (22.88 KB)
• NETDIAG.exe (278.38 KB)
• NETHIS.exe (230.88 KB)
• NNTABLE.exe (85.38 KB)
• NNTDUMP.exe (44.38 KB)
• OPC20iFIX.exe (375.88 KB)
• OpcDataSystemStats.exe (62.88 KB)
• OPCDidw.exe (751.16 KB)
• OPCDrv.exe (651.14 KB)
• OPCspoll.exe (71.09 KB)
• OPCUninstall.exe (195.09 KB)
• osxdiag.exe (29.88 KB)
• PCMHistory.exe (342.88 KB)
• PCMUtility.exe (180.88 KB)
• PictureConverter.exe (61.88 KB)
• PMON.EXE (230.88 KB)
• PNLWATCH.EXE (100.68 KB)
• Rcp.exe (683.38 KB)
• RCPDOWN.exe (389.38 KB)
• RCPUP.exe (384.88 KB)
• RegIODrivers.exe (63.88 KB)
• ScadaRoleMgr.exe (38.38 KB)
• ScadaSync.exe (212.88 KB)
• ScadaSyncMonitor.exe (147.88 KB)
• SCU.exe (1.29 MB)
• SECCFG.exe (1.36 MB)
• SecuritySynchronizer.exe (78.88 KB)
• SEETHRU.EXE (48.68 KB)
• sm2didw.exe (41.37 KB)
• sm2Spoll.exe (21.37 KB)
• SQLTODC.exe (391.38 KB)
• StartupProfileMgr.exe (172.88 KB)
• sumqdel.exe (44.38 KB)
• SVGExportHelper.exe (37.38 KB)
• SysAlertQMgr.exe (37.38 KB)
• SysAlertViewer.exe (60.88 KB)
• TagGroupEditor.exe (233.88 KB)
• Tcpdump.exe (94.88 KB)
• Tcptask.exe (227.88 KB)

...click to view all...

The current page applies to Proficy HMI SCADA - iFIX 5.5 version 5.50.10179 only. If you are manually uninstalling Proficy HMI SCADA - iFIX 5.5 we suggest you to check if the following data is left behind on your PC.

Folders left behind when you uninstall Proficy HMI SCADA - iFIX 5.5:

• C:\Program Files (x86)\Proficy\Proficy iFIX

Files remaining:

• C:\Program Files (x86)\Proficy\Proficy iFIX\_Config.ini
• C:\Program Files (x86)\Proficy\Proficy iFIX\_UNODBC.LOG
• C:\Program Files (x86)\Proficy\Proficy iFIX\{E774238A-1F0A-4CC5-81EF-849179900AEE}\Proficy HMI SCADA - iFIX.msi
• C:\Program Files (x86)\Proficy\Proficy iFIX\aadback.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AADWrapDlgAPI.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AADWrapFileAPI.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AAMTCP.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\Add Tags to iFix Collector.bat
• C:\Program Files (x86)\Proficy\Proficy iFIX\ADDON\DynamicRibbon.ini
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasCfgDlgRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasCfgDlgTypers.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasDialogAAD.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasDialogAADRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasDialogBlocks.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasDialogBlocksRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmAreasFileAAD.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmCounters.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCX.ocx
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXCHS.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXDEU.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXENU.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXFRA.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXJPN.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXKOR.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXPLK.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlarmSummaryOCXRUS.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALM\200714.EVT
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALM\200721.EVT
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALM\201009.EVT
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALM\201010.EVT
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALM\EvtStamp.del
• C:\Program Files (x86)\Proficy\Proficy iFIX\Alm_sync.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALMCTMEM.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmData.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmFile.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\Almhis.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\almlib.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\Almodbc.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmODBCConfig.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmODBCConfigRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\ALMODBCDump.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\almprin.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmQDump.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\almstat.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\Almsum.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmSumMgr.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AlmSumMgrRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\APP\BuildDynamoInstall.grf
• C:\Program Files (x86)\Proficy\Proficy iFIX\APP\ChartGroupInstall.grf
• C:\Program Files (x86)\Proficy\Proficy iFIX\APP\iDetective.tbx
• C:\Program Files (x86)\Proficy\Proficy iFIX\APP\SQLERR.TXT
• C:\Program Files (x86)\Proficy\Proficy iFIX\APP\SysAlertQ.dat
• C:\Program Files (x86)\Proficy\Proficy iFIX\AppValConfig.ini
• C:\Program Files (x86)\Proficy\Proficy iFIX\AppValidator.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\AppValidatorRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AppValidatorUtilities.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AppValidatorUtilitiesRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\AreaAsTg.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\BackupRestore.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\BackupRestoreDll.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BackupRestoreRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BaseErrorsRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGCBPRO1210100.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGCBProResCHS.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGPStyle2007Aqua1210.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGPStyle2007Luna1210.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGPStyle2007Obsidian1210.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BCGPStyle2007Silver1210.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\Bitlib.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_AIS.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_AR2.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_BPL.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_CTR.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_D16.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_DR2.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_ETR.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_GAB.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\btk_gen.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_ITM.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_MDO.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_ODO.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_PAR.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_PI2.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_TDS.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_TXR.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTK_TXT.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\Btkcfg.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\BtkcfgRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\BTKINIT.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\btn32x10.ocx
• C:\Program Files (x86)\Proficy\Proficy iFIX\CCUpdateWebSpace.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\ChangeManagerDll.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\ChangeManagerDll.tlb
• C:\Program Files (x86)\Proficy\Proficy iFIX\ChangeManagerRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\CHECKHW.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\CleanSims.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\Cleansims.exe
• C:\Program Files (x86)\Proficy\Proficy iFIX\CleanSimsRes.dll
• C:\Program Files (x86)\Proficy\Proficy iFIX\ClientAPIState.exe

Registry that is not removed:

• HKEY_LOCAL_MACHINE\Software\GE Intelligent Platforms\Proficy HMI SCADA - iFIX 5.5
• HKEY_LOCAL_MACHINE\Software\GE Intelligent Platforms\Proficy HMI/SCADA iFIX (Chinese Simplified)
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{8E2D0FDB-EF39-4AE0-A9E8-619E7575A17E}

Open regedit.exe in order to remove the following values:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Proficy\Proficy iFIX\launch.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\FIX\ImagePath

How to delete Proficy HMI SCADA - iFIX 5.5 from your PC using Advanced Uninstaller PRO

Proficy HMI SCADA - iFIX 5.5 is an application by GE Intelligent Platforms. Some people want to erase this program. This is efortful because uninstalling this by hand requires some experience related to Windows internal functioning. One of the best EASY solution to erase Proficy HMI SCADA - iFIX 5.5 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, install it. This is a good step because Advanced Uninstaller PRO is one of the best uninstaller and general tool to take care of your computer.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the green DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with Advanced Uninstaller PRO's interface and number of tools available. Advanced Uninstaller PRO is a very good system utility.

3. Click on the General Tools category


4. Click on the Uninstall Programs feature


5. All the programs existing on the computer will be made available to you

6. Navigate the list of programs until you locate Proficy HMI SCADA - iFIX 5.5 or simply activate the Search field and type in "Proficy HMI SCADA - iFIX 5.5". The Proficy HMI SCADA - iFIX 5.5 app will be found very quickly. Notice that when you select Proficy HMI SCADA - iFIX 5.5 in the list , some information regarding the application is shown to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other users have regarding Proficy HMI SCADA - iFIX 5.5, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Click on the Read reviews button.
• Details regarding the application you want to remove, by pressing the Properties button.

For example you can see that for Proficy HMI SCADA - iFIX 5.5:

• The web site of the application is: http://www.ge-ip.com
• The uninstall string is: C:\Archivos de programa\InstallShield Installation Information\{8E2D0FDB-EF39-4AE0-A9E8-619E7575A17E}\Setup.exe

7. Press the Uninstall button. A confirmation dialog will show up. Confirm the removal by clicking Uninstall. Advanced Uninstaller PRO will automatically remove Proficy HMI SCADA - iFIX 5.5.


8. After uninstalling Proficy HMI SCADA - iFIX 5.5, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to start the cleanup. All the items of Proficy HMI SCADA - iFIX 5.5 which have been left behind will be found and you will be asked if you want to delete them. By removing Proficy HMI SCADA - iFIX 5.5 using Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your system.

Your system will remain clean, speedy and ready to run without errors or problems.

Geographical user distribution

Disclaimer

This page is not a piece of advice to remove Proficy HMI SCADA - iFIX 5.5 by GE Intelligent Platforms from your computer, nor are we saying that Proficy HMI SCADA - iFIX 5.5 by GE Intelligent Platforms is not a good application for your PC. This page simply contains detailed info on how to remove Proficy HMI SCADA - iFIX 5.5 in case you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.