Process Modeling (HYSYS) V7.0

How to uninstall Process Modeling (HYSYS) V7.0 from your system

This page contains detailed information on how to remove Process Modeling (HYSYS) V7.0 for Windows. The Windows version was developed by AspenTech. You can find out more on AspenTech or check for application updates here. Detailed information about Process Modeling (HYSYS) V7.0 can be seen at http://www.aspentech.com. Process Modeling (HYSYS) V7.0 is usually installed in the C:\Program Files\AspenTech\Aspen HYSYS V7.0 folder, however this location may differ a lot depending on the user's decision when installing the application. You can remove Process Modeling (HYSYS) V7.0 by clicking on the Start menu of Windows and pasting the command line MsiExec.exe /X{AAF97693-066B-44D2-987D-94DCFD883A13}. Keep in mind that you might receive a notification for admin rights. hysys.exe is the programs's main file and it takes about 328.00 KB (335872 bytes) on disk.

Process Modeling (HYSYS) V7.0 contains of the executables below. They occupy 1.86 MB (1953504 bytes) on disk.

• apropconnect.exe (368.00 KB)
• dataman.exe (392.00 KB)
• hmc.exe (96.00 KB)
• hysys.exe (328.00 KB)
• icserver.exe (540.00 KB)
• regextn.exe (47.72 KB)
• viewed.exe (136.00 KB)

...click to view all...

The current web page applies to Process Modeling (HYSYS) V7.0 version 22.0.0 only. After the uninstall process, the application leaves some files behind on the PC. Part_A few of these are shown below.

You should delete the folders below after you uninstall Process Modeling (HYSYS) V7.0:

• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0

Generally, the following files remain on disk:

• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\air_liq.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\amines.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\aplusint.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\apropconnect.exe
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\apropconnectps.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\arrayestim.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\arrayoptim.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\aspenhydraulics.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\aspenhydraulicsreferenceguide.chm
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSDynModelingV7_0-Ref.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\aspenhysysgettingstarted.chm
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSOLIIFV7_0-Ref.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSRefiningCatCracker-OpsV7_0.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSRefiningTranObjExtV7_0.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSRefiningV7_0-Ops.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSSimBasisV7_0-Ref.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSUpstreamV7_0-Opt.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSV7_0-Cust.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSV7_0-Ops.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSV7_0-Tutorial.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\AspenHYSYSV7_0-Usr.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Aspentech.HYSYS.Interop.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\atmodel.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\autogen.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\azpn9.pkf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\baseobj.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\bender.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\blackoilprops.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\blending.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\caserdr.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\comthermo.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\autoexec.xml
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\ext_dlls.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\ext_map.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\headers.mdl
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\headers_mdl_map.xml
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\hysysmap.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\icar_map.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\icar_map_imp.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\icar_map_met.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\icrprts.fmt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\icunits.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\picasso.mdl
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\strintab.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\unitlist.txt
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Config\unitpref.xml
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\CorrMan.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\dataman.exe
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\datasvr2.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\dbrprops.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\dcsdef32.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\ddearr32.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\ddecli32.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\index.dcs
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\ddedemo.doc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\Excel\xlddetag.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\Excel\xldemo.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\Excel\xldemo.xls
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\pid.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\pidexec.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\pidreset.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\pidstart.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\pidstop.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\tparrplt.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\42\tparrset.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\pid.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\pidexec.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\pidreset.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\pidstart.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\pidstop.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\tparrplt.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\52\tparrset.m
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\DCS\Samples\DDE\MatLab\mlbdemo.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\dforrtd.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\dlpack.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\dxsinterface.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\eo_reference.chm
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\EOSMCLoadGen.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\CleanFuels.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\CleanFuels.EDF
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\Example Gasoline Fractionator.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\FPE 2001.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\FPE 2002.pdf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\Nrtltstcf.dat
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\Nrtltstcf.idx
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\tst.dat
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\tst.idx
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\CleanFuels\Txy Plot Utility.xls
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\OLGALink_v6.dll
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\olgalink_v6.edf
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample1\HYSYS\processtestFinal.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample1\OLGA\process-test.inp
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample1\OLGA\processtest.tab
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample1\OLGA\process-test100103134946.snp
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample2\HYSYS\OLGALinkSample2.hsc
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample2\OLGA\OLGALinkSample2.inp
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample2\OLGA\OLGALinkSample2.tab
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\HYSYS OLGA Link\Sample2\OLGA\OLGALinkSample2111903083301.snp
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\pipesimlink\Empty.bps
• C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\Extensions\pipesimlink\PsmElnk.dll

Frequently the following registry keys will not be uninstalled:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files (x86)|AspenTech|Aspen HYSYS V7.0|Aspentech.HYSYS.Interop.dll
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\39679FAAB6602D4489D749CDDF88A331
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\B363571DC71AD524A8B98DFFD4C456F6
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{AAF97693-066B-44D2-987D-94DCFD883A13}

Use regedit.exe to delete the following additional registry values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\AspenTech\Aspen HYSYS V7.0\hysys.exe
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\39679FAAB6602D4489D749CDDF88A331\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\B363571DC71AD524A8B98DFFD4C456F6\ProductName

A way to delete Process Modeling (HYSYS) V7.0 with the help of Advanced Uninstaller PRO

Process Modeling (HYSYS) V7.0 is a program offered by AspenTech. Frequently, computer users decide to erase it. This can be easier said than done because performing this by hand takes some skill regarding removing Windows applications by hand. The best SIMPLE manner to erase Process Modeling (HYSYS) V7.0 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around utility to take care of your Windows computer.

DOWNLOAD NOW

• visit Download Link
• download the program by clicking on the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to admire Advanced Uninstaller PRO's design and number of features available. Advanced Uninstaller PRO is a very good Windows optimizer.

3. Press the General Tools button


4. Activate the Uninstall Programs button


5. A list of the programs installed on your PC will be shown to you

6. Scroll the list of programs until you find Process Modeling (HYSYS) V7.0 or simply click the Search field and type in "Process Modeling (HYSYS) V7.0". If it is installed on your PC the Process Modeling (HYSYS) V7.0 app will be found automatically. Notice that after you click Process Modeling (HYSYS) V7.0 in the list of apps, the following data regarding the application is shown to you:

• Safety rating (in the left lower corner). This tells you the opinion other people have regarding Process Modeling (HYSYS) V7.0, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Press the Read reviews button.
• Details regarding the program you wish to remove, by clicking on the Properties button.

For example you can see that for Process Modeling (HYSYS) V7.0:

• The software company is: http://www.aspentech.com
• The uninstall string is: MsiExec.exe /X{AAF97693-066B-44D2-987D-94DCFD883A13}

7. Click the Uninstall button. A confirmation window will come up. accept the removal by clicking Uninstall. Advanced Uninstaller PRO will remove Process Modeling (HYSYS) V7.0.


8. After removing Process Modeling (HYSYS) V7.0, Advanced Uninstaller PRO will offer to run an additional cleanup. Press Next to proceed with the cleanup. All the items that belong Process Modeling (HYSYS) V7.0 that have been left behind will be detected and you will be able to delete them. By removing Process Modeling (HYSYS) V7.0 using Advanced Uninstaller PRO, you are assured that no registry entries, files or folders are left behind on your PC.

Your computer will remain clean, speedy and ready to take on new tasks.

Geographical user distribution

Disclaimer

This page is not a recommendation to remove Process Modeling (HYSYS) V7.0 by AspenTech from your PC, we are not saying that Process Modeling (HYSYS) V7.0 by AspenTech is not a good application for your computer. This text only contains detailed info on how to remove Process Modeling (HYSYS) V7.0 in case you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.