Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017

A guide to uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 from your PC

Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 is a Windows program. Read below about how to remove it from your computer. It was developed for Windows by nPower Software. Open here for more details on nPower Software. You can get more details on Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 at http://www.nPowerSoftware.com. Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 is frequently installed in the C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS folder, however this location may differ a lot depending on the user's choice when installing the program. The complete uninstall command line for Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 is C:\Program Files (x86)\InstallShield Installation Information\{966EA065-37A7-4D1B-B721-620C5DA308D1}\setup.exe. Treehouse.exe is the programs's main file and it takes around 2.26 MB (2368000 bytes) on disk.

The executable files below are part of Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017. They take an average of 199.91 MB (209621448 bytes) on disk.

• DsgnChkRptView.exe (209.90 KB)
• gabiswengine.exe (22.27 MB)
• LocalSldService.exe (20.40 KB)
• nPowerTranslator.exe (733.25 KB)
• propertyManagerUpload.exe (248.90 KB)
• QuadizeWithCurvature.exe (3.30 MB)
• RTLibraryManager.exe (5.42 MB)
• setcatenv.exe (35.42 KB)
• sldbgproc.exe (46.40 KB)
• sldCostingTemplateEditorAppU.exe (335.90 KB)
• SLDEXITAPP.exe (1.20 MB)
• sldphotoshopcon.exe (68.90 KB)
• sldProcMon.exe (418.90 KB)
• sldShellExtServer.exe (67.40 KB)
• SldToolboxConfigure.exe (8.55 MB)
• sldtoolboxupdater.exe (603.40 KB)
• sldu3d.exe (523.40 KB)
• SLDWORKS.exe (848.40 KB)
• sldworks_fs.exe (308.40 KB)
• swShellFileLauncher.exe (359.90 KB)
• swspmanager.exe (151.40 KB)
• UtlReportViewer.exe (166.40 KB)
• pidcollector.exe (24.00 KB)
• cefsharp.browsersubprocess.exe (16.90 KB)
• circuitworks.exe (841.00 KB)
• driveworksxpressdt.exe (17.00 KB)
• Dsgnchkbldu.exe (2.12 MB)
• DsgnChkDesignBinderu.exe (209.50 KB)
• efdsolver.exe (2.64 MB)
• ffmpeg.exe (11.73 MB)
• IwSwStreamManager.exe (15.75 KB)
• myproducts.exe (2.02 MB)
• foundrycrashhandler.exe (1.00 MB)
• photoview360.exe (698.39 KB)
• photoview360_cl.exe (682.39 KB)
• ShellingAPI.exe (41.73 KB)
• LeggacyUpgrader.exe (21.74 KB)
• nPowerTranslator.exe (728.75 KB)
• QuadizeWithCurvature.exe (3.30 MB)
• copyoptwiz.exe (3.59 MB)
• swactwiz.exe (9.47 MB)
• swactwizhelpersc.exe (3.76 MB)
• swactwiz_s.exe (9.47 MB)
• swinstactsvc.exe (1.20 MB)
• swlicservinst.exe (283.90 KB)
• swinstactsvc.exe (954.90 KB)
• ans2cos.exe (1.76 MB)
• check.exe (196.29 KB)
• check_net.exe (433.40 KB)
• cos2abq.exe (1.63 MB)
• cos2ans.exe (1.38 MB)
• cos2nas.exe (1.81 MB)
• cos2pat.exe (1.34 MB)
• cos2xds.exe (1.26 MB)
• cwanalysisproc.exe (63.40 KB)
• cwmeshproc.exe (32.40 KB)
• dpost.exe (1.21 MB)
• dstar.exe (3.32 MB)
• fat.exe (1.94 MB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• hstar.exe (3.39 MB)
• ids2cos.exe (1.70 MB)
• nas2cos.exe (1.81 MB)
• nstar.exe (515.90 KB)
• pat2cos.exe (1.48 MB)
• postans.exe (102.90 KB)
• pre1.exe (34.90 KB)
• renum.exe (34.90 KB)
• SOLIDWORKS Simulation Network Share.exe (1.38 MB)
• star.exe (21.30 MB)
• stopt.exe (554.90 KB)
• stres.exe (1.21 MB)
• sysinf.exe (122.90 KB)
• swactwiz.exe (7.00 MB)
• cosmossupporttool.exe (249.29 KB)
• material.exe (345.27 KB)
• simulation cleaning utility.exe (379.90 KB)
• sldBenchmark.exe (2.06 MB)
• PropertyTabBuilder.exe (991.00 KB)
• sldrx.exe (2.41 MB)
• sldrxET.exe (127.90 KB)
• sldrxmm.exe (120.90 KB)
• GtReportManager.exe (206.50 KB)
• sldimport.exe (49.50 KB)
• cnextmproc.exe (15.86 KB)
• spa_lic_app.exe (305.88 KB)
• DTSCoordinatorService.exe (79.40 KB)
• DTSMonitor.exe (574.90 KB)
• DTSServiceManager.exe (20.40 KB)
• swboengine.exe (1.45 MB)
• swScheduler.exe (3.95 MB)
• drawcompare.exe (237.29 KB)
• PresentationStudioThemeEditor.exe (2.29 MB)
• DatabaseConverter.exe (46.90 KB)
• sldsetdocprop.exe (8.34 MB)
• UpdateBrowserDatabase.exe (587.90 KB)
• Treehouse.exe (2.26 MB)

...click to view all...

This web page is about Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 version 6.1.0000 alone. Some files and registry entries are typically left behind when you uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017.

Folders found on disk after you uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 from your PC:

• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS

The files below remain on your disk when you remove Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017:

• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\3dviacomposer_lm.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\ac0spxml.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\ACE.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admhoops.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admhusk.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admicon.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AdobePDFL.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AdobeXMP.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AGM.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\a.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ambient.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\angle.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\b.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\c.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\camera.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\color.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cone_angle.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_f1.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_func.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_harmonic.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_spline.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_step.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_vi.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cwplot.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\diffuse.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\distance.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_in.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_in_out.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_out.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddengrey.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddenremoved.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddenvisible.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\light_off.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\light_on.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\mating.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\motion_task.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\move.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\move_no_solve.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\nocolor.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\perspective.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\pv_ambientlight_off.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\pv_ambientlight_on.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\reverse_direction.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sectionview.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\shaded.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\shadededges.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sketch.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sketch_dim.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\snap.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\specularity.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\spot_exponent.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\stress_plot.png
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\transparency.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewp.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewstate_hidden.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewstate_shown.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\wireframe.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\annotationcplu.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationOperation.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationUI.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationWPF.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\API_GB.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\apihelp.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\apihelp.chw
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\cworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\cworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\dsgnchkapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\dsgnchkapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodelapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodelapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodeltoolkit.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\fworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\fworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\obsoleteapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pdmworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pdmworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pidcollector.exe
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\PDMWorks.Interop.pdmworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\redist.txt
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.cosworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.dsgnchk.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.fworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.gtswutilities.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sldcostingapi.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sldtoolboxconfigureaddin.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sldworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sustainability.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.sw3dprinter.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swbrowser.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swcommands.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swconst.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swdimxpert.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swdocumentmgr.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swmotionstudy.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.swpublished.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.SWRoutingLib.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\routingapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\routingapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\sldworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\sldworksapiprogguide.chm

Registry keys:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|api|redist|SolidWorks.Interop.cosworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|dznet.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|SldForum.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|sldxps.dll
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{966EA065-37A7-4D1B-B721-620C5DA308D1}
• HKEY_LOCAL_MACHINE\Software\nPower Software\Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017

Open regedit.exe to delete the values below from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~1\SOLIDW~1\SOLIDW~1\SWSHEL~1.EXE.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~1\SOLIDW~1\SOLIDW~1\SWSHEL~1.EXE.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer\Bin\composerplayer.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Composer\Bin\composerplayer.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks flow simulation\bincfw\efdsolver.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks flow simulation\bincfw\efdsolver.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize\SLDWORKSVisualize.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS Visualize\SLDWORKSVisualize.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks\photoview\photoview360.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks\photoview\photoview360.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\SLDWORKS.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\SLDWORKS.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks\swscheduler\dtsmonitor.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\program files\solidworks corp\solidworks\swscheduler\dtsmonitor.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CoordinatorServiceHost\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteSolverDispatcher\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{143F9A51-FA22-45C0-B1AF-DF0C7CC92BE2}C:\program files\solidworks corp\solidworks flow simulation\bincfw\efdsolver.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{E364FEAF-497C-45F8-92BA-652836C63A5A}C:\program files\solidworks corp\solidworks\photoview\photoview360.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{FB6575FB-DC4F-4229-A00C-9AA2B3B8E6B9}C:\program files\solidworks corp\solidworks\swscheduler\dtsmonitor.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{13F35374-A5D2-4863-8F54-FADD21304E49}C:\program files\solidworks corp\solidworks\swscheduler\dtsmonitor.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{920A6A59-70C7-44FD-B7FB-F3539993F5DD}C:\program files\solidworks corp\solidworks flow simulation\bincfw\efdsolver.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{B7194257-36B9-4039-8B5A-5403BF65B2D9}C:\program files\solidworks corp\solidworks\photoview\photoview360.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SWVisualize2017.BoostService\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SWVisualize2017.Queue.Server\ImagePath

How to erase Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 from your computer using Advanced Uninstaller PRO

Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 is an application released by the software company nPower Software. Frequently, people want to uninstall it. This can be easier said than done because deleting this manually requires some knowledge related to removing Windows applications by hand. One of the best QUICK way to uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, install it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and general tool to clean your PC.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with Advanced Uninstaller PRO's design and wealth of features available. Advanced Uninstaller PRO is a powerful Windows tool.

3. Press the General Tools button


4. Activate the Uninstall Programs tool


5. All the applications existing on the PC will appear

6. Navigate the list of applications until you locate Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 or simply activate the Search field and type in "Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017". The Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 app will be found very quickly. Notice that when you click Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 in the list , some information about the application is available to you:

• Star rating (in the lower left corner). The star rating explains the opinion other people have about Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other people - Press the Read reviews button.
• Details about the program you wish to uninstall, by pressing the Properties button.

For instance you can see that for Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017:

• The web site of the program is: http://www.nPowerSoftware.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{966EA065-37A7-4D1B-B721-620C5DA308D1}\setup.exe

7. Press the Uninstall button. A confirmation page will appear. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017.


8. After removing Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to start the cleanup. All the items that belong Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 which have been left behind will be detected and you will be asked if you want to delete them. By removing Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 using Advanced Uninstaller PRO, you can be sure that no registry entries, files or folders are left behind on your system.

Your system will remain clean, speedy and able to serve you properly.

Disclaimer

This page is not a piece of advice to uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 by nPower Software from your computer, nor are we saying that Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 by nPower Software is not a good application for your computer. This text simply contains detailed info on how to uninstall Power Surfacing / Power Surfacing RE for SOLIDWORKS 2017 supposing you want to. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.