Power Surfacing 2.4

A guide to uninstall Power Surfacing 2.4 from your computer

Power Surfacing 2.4 is a Windows application. Read below about how to remove it from your computer. It is written by nPower Software. Additional info about nPower Software can be found here. More data about the application Power Surfacing 2.4 can be seen at http://www.nPowerSoftware.com. The application is frequently located in the C:\Program Files\SolidWorks Corp\SolidWorks directory. Take into account that this location can differ being determined by the user's decision. The full uninstall command line for Power Surfacing 2.4 is C:\Program Files (x86)\InstallShield Installation Information\{095D75F1-B518-4897-8A7A-B947E497198A}\setup.exe. swspmanager.exe is the Power Surfacing 2.4's main executable file and it occupies circa 151.60 KB (155240 bytes) on disk.

The executable files below are installed beside Power Surfacing 2.4. They take about 148.14 MB (155334896 bytes) on disk.

DsgnChkRptView.exe (208.60 KB)
gabiswengine.exe (2.28 MB)
LicenseUtil.exe (4.50 KB)
LocalSldService.exe (15.10 KB)
propertyManagerUpload.exe (243.10 KB)
RTLibraryManager.exe (5.05 MB)
setcatenv.exe (38.10 KB)
sldbgproc.exe (44.60 KB)
sldCostingTemplateEditorAppU.exe (326.60 KB)
sldexitapp.exe (710.60 KB)
sldphotoshopcon.exe (78.10 KB)
sldProcMon.exe (101.10 KB)
sldShellExtServer.exe (59.60 KB)
sldu3d.exe (9.93 MB)
SLDWORKS.exe (2.24 MB)
sldworks_fs.exe (306.10 KB)
SW2010-2013.Activator.SSQ.exe (2.53 MB)
swShellFileLauncher.exe (351.60 KB)
swspmanager.exe (151.60 KB)
UtlReportViewer.exe (155.10 KB)
pidcollector.exe (24.00 KB)
innovahxreg.exe (61.54 KB)
circuitworks.exe (714.60 KB)
driveworksxpressdt.exe (16.50 KB)
Dsgnchkbldu.exe (2.16 MB)
DsgnChkDesignBinderu.exe (196.00 KB)
efdsolver.exe (473.13 KB)
photoview360.exe (579.34 KB)
photoview360_cl.exe (564.34 KB)
copyoptwiz.exe (3.56 MB)
lmutil.exe (1.54 MB)
MigrateDesignLib.exe (61.77 KB)
swactwiz.exe (8.65 MB)
swactwizhelpersc.exe (3.76 MB)
swactwiz_s.exe (8.65 MB)
swinstactsvc.exe (784.60 KB)
swlicservinst.exe (250.60 KB)
swlmutil.exe (2.99 MB)
swlmwiz.exe (8.20 MB)
ans2cos.exe (1.13 MB)
check.exe (196.29 KB)
cos2abq.exe (1.06 MB)
cos2ans.exe (825.07 KB)
cos2nas.exe (1.18 MB)
cos2pat.exe (791.57 KB)
cos2xds.exe (733.57 KB)
cwanalysisproc.exe (57.10 KB)
cwmeshproc.exe (28.60 KB)
dpost.exe (637.60 KB)
dstar.exe (3.63 MB)
fat.exe (1.05 MB)
ghs3d.exe (2.73 MB)
ghs3dv3.exe (2.42 MB)
hstar.exe (3.62 MB)
ids2cos.exe (1.16 MB)
nas2cos.exe (1.19 MB)
nstar.exe (5.40 MB)
ParametricObject.exe (180.60 KB)
pat2cos.exe (970.57 KB)
postans.exe (103.10 KB)
renum.exe (35.10 KB)
star.exe (11.23 MB)
stopt.exe (555.10 KB)
stres.exe (637.10 KB)
swactwiz.exe (6.60 MB)
swlicservinst.exe (250.60 KB)
cosmossupporttool.exe (249.29 KB)
material.exe (345.27 KB)
simulation cleaning utility.exe (363.07 KB)
sld3dViaUploader.exe (124.00 KB)
sldBenchmark.exe (194.50 KB)
PropertyTabBuilder.exe (860.00 KB)
sldrx.exe (1.77 MB)
sldrxmm.exe (107.60 KB)
GtReportManager.exe (203.00 KB)
DTSCoordinatorService.exe (75.10 KB)
DTSMonitor.exe (579.60 KB)
DTSServiceManager.exe (15.10 KB)
swBOEngine.exe (1.29 MB)
swScheduler.exe (2.42 MB)
drawcompare.exe (237.29 KB)
swvbaserver.exe (378.00 KB)
sldsetdocprop.exe (5.45 MB)
UpdateBrowserData.exe (365.10 KB)
SldToolboxConfigure.exe (7.83 MB)
sldtoolboxupdater.exe (280.50 KB)

...click to view all...

The information on this page is only about version 2.40.0075 of Power Surfacing 2.4. If planning to uninstall Power Surfacing 2.4 you should check if the following data is left behind on your PC.

Folders remaining:

C:\Program Files\SolidWorks Corp\SolidWorks

Check for and remove the following files from your disk when you uninstall Power Surfacing 2.4:

C:\Program Files\SolidWorks Corp\SolidWorks\3dviacomposer_lm.dll
C:\Program Files\SolidWorks Corp\SolidWorks\ac0spxml.dll
C:\Program Files\SolidWorks Corp\SolidWorks\admhoops.dll
C:\Program Files\SolidWorks Corp\SolidWorks\admhusk.dll
C:\Program Files\SolidWorks Corp\SolidWorks\admicon.dll
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\a.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\ambient.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\angle.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\b.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\c.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\camera.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\color.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cone_angle.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_f1.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_func.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_harmonic.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_spline.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_step.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cosmos_motion_vi.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\cwplot.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\diffuse.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\distance.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\ease_in.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\ease_in_out.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\ease_out.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\hiddengrey.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\hiddenremoved.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\hiddenvisible.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\light_off.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\light_on.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\mating.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\motion_task.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\move.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\move_no_solve.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\nocolor.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\perspective.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\pv_ambientlight_off.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\pv_ambientlight_on.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\reverse_direction.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\sectionview.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\shaded.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\shadededges.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\sketch.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\sketch_dim.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\snap.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\specularity.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\spot_exponent.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\stress_plot.png
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\transparency.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\viewp.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\viewstate_hidden.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\viewstate_shown.gif
C:\Program Files\SolidWorks Corp\SolidWorks\animator\data\images\wireframe.gif
C:\Program Files\SolidWorks Corp\SolidWorks\annotationcplu.dll
C:\Program Files\SolidWorks Corp\SolidWorks\AnnotationOperation.dll
C:\Program Files\SolidWorks Corp\SolidWorks\AnnotationUI.dll
C:\Program Files\SolidWorks Corp\SolidWorks\AnnotationWPF.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\apihelp.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\apihelp.chw
C:\Program Files\SolidWorks Corp\SolidWorks\api\cworksapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\cworksapivb6.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\dsgnchkapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\dsgnchkapivb6.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\emodelapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\emodelapivb6.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\emodeltoolkit.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\fworksapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\fworksapivb6.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi.hxc
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi.hxt
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi_a.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi_d.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi_f.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi_k.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_sldworksapi_n.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst.hxc
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst.hxt
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst_a.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst_d.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst_f.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst_k.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\col_swconst_n.hxk
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\innovahxreg.exe
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\sldworksapi.hxs
C:\Program Files\SolidWorks Corp\SolidWorks\api\HTMLHelp2x\swconst.hxs
C:\Program Files\SolidWorks Corp\SolidWorks\api\obsoleteapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\pdmworksapi.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\pdmworksapivb6.chm
C:\Program Files\SolidWorks Corp\SolidWorks\api\pidcollector.exe
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\PDMWorks.Interop.pdmworks.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.cosworks.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.dsgnchk.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.fworks.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.gtswutilities.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.sldcostingapi.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.sldtoolboxconfigureaddin.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.sldworks.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.sustainability.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.sw3dprinter.dll
C:\Program Files\SolidWorks Corp\SolidWorks\api\redist\CLR2\SolidWorks.Interop.swbrowser.dll

Registry that is not uninstalled:

HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks eDrawings X64 Edition|eDrawingsGraphicsCardClient.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|api|redist|SolidWorks.Interop.cosworks.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|dznet.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|microsoft.office.interop.excel.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SldForum.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|sldxps.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.IRemoteInteropObjectContract.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.MacroBuilder.dll
HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SolidWorks Corp|SolidWorks|SolidWorks.Proxy.Sldworks.dll
HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{095D75F1-B518-4897-8A7A-B947E497198A}
HKEY_LOCAL_MACHINE\Software\nPower Software\Power Surfacing / Power Surfacing RE for SOLIDWORKS 2020
HKEY_LOCAL_MACHINE\Software\nPower Software\Power Surfacing 2.4

Supplementary registry values that are not removed:

HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~1\SOLIDW~1\SOLIDW~1\SLDWORKS.exe
HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\PROGRA~1\SOLIDW~1\SOLIDW~1\SWSHEL~1.EXE
HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SolidWorks Corp\SolidWorks eDrawings\EModelViewer.exe
HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SolidWorks Corp\SolidWorks\photoview\photoview360.exe
HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SolidWorks Corp\SolidWorks\SLDWORKS.exe
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteSolverDispatcher\ImagePath
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{76ED1160-83C5-4C80-9406-28A5EC5EF8FE}C:\program files\solidworks corp\solidworks\photoview\photoview360.exe
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{0DE72EE2-1A27-4664-B411-904F1C1610FC}C:\program files\solidworks corp\solidworks\photoview\photoview360.exe

How to delete Power Surfacing 2.4 from your computer with the help of Advanced Uninstaller PRO

Power Surfacing 2.4 is an application marketed by nPower Software. Frequently, computer users want to remove it. Sometimes this can be hard because uninstalling this manually takes some experience regarding PCs. The best SIMPLE practice to remove Power Surfacing 2.4 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:

1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and general tool to take care of your PC.

DOWNLOAD NOW

navigate to Download Link
download the setup by clicking on the green DOWNLOAD button
set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire Advanced Uninstaller PRO's design and wealth of functions available. Advanced Uninstaller PRO is a very useful Windows optimizer.

3. Click on the General Tools category
Go to General Tools

4. Click on the Uninstall Programs feature
Go to Uninstall Programs

5. A list of the applications existing on the computer will appear

6. Navigate the list of applications until you locate Power Surfacing 2.4 or simply click the Search feature and type in "Power Surfacing 2.4". The Power Surfacing 2.4 program will be found very quickly. After you select Power Surfacing 2.4 in the list of programs, some information about the program is available to you:

Star rating (in the left lower corner). The star rating tells you the opinion other people have about Power Surfacing 2.4, ranging from "Highly recommended" to "Very dangerous".
Opinions by other people - Click on the Read reviews button.
Details about the program you are about to remove, by clicking on the Properties button.

For instance you can see that for Power Surfacing 2.4:

The web site of the application is: http://www.nPowerSoftware.com
The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{095D75F1-B518-4897-8A7A-B947E497198A}\setup.exe

7. Press the Uninstall button. A confirmation window will appear. accept the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically uninstall Power Surfacing 2.4.

8. After uninstalling Power Surfacing 2.4, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to start the cleanup. All the items of Power Surfacing 2.4 which have been left behind will be found and you will be asked if you want to delete them. By removing Power Surfacing 2.4 with Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your system.

Your system will remain clean, speedy and able to serve you properly.

DOWNLOAD NOW

Disclaimer

This page is not a piece of advice to uninstall Power Surfacing 2.4 by nPower Software from your PC, nor are we saying that Power Surfacing 2.4 by nPower Software is not a good application. This page only contains detailed info on how to uninstall Power Surfacing 2.4 supposing you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.

2017-05-06 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu

Last update on: 2017-05-06 08:37:32.457

Publishers

Power Surfacing 2.4

A guide to uninstall Power Surfacing 2.4 from your computer

How to delete Power Surfacing 2.4 from your computer with the help of Advanced Uninstaller PRO

Disclaimer