Power Shelling for SOLIDWORKS 2020

A guide to uninstall Power Shelling for SOLIDWORKS 2020 from your PC

This web page is about Power Shelling for SOLIDWORKS 2020 for Windows. Below you can find details on how to remove it from your computer. It was developed for Windows by nPower Software. More data about nPower Software can be found here. More details about Power Shelling for SOLIDWORKS 2020 can be seen at http://www.nPowerSoftware.com. The program is usually placed in the C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS folder (same installation drive as Windows). The full command line for removing Power Shelling for SOLIDWORKS 2020 is C:\Program Files (x86)\InstallShield Installation Information\{A0BDEF34-4269-448C-9C7C-0036BD57F7A6}\setup.exe. Note that if you will type this command in Start / Run Note you might receive a notification for administrator rights. SLDWORKS.exe is the programs's main file and it takes approximately 1,014.00 KB (1038336 bytes) on disk.

The executable files below are installed alongside Power Shelling for SOLIDWORKS 2020. They take about 234.75 MB (246149408 bytes) on disk.

• DsgnChkRptView.exe (278.50 KB)
• gabiswengine.exe (22.27 MB)
• LocalSldService.exe (20.50 KB)
• nPowerTranslator.exe (733.25 KB)
• propertyManagerUpload.exe (243.00 KB)
• QuadizeWithCurvature.exe (3.30 MB)
• RTLibraryManager.exe (6.32 MB)
• setcatenv.exe (35.42 KB)
• sldbgproc.exe (68.50 KB)
• sldCostingTemplateEditorAppU.exe (333.00 KB)
• SLDEXITAPP.exe (1.32 MB)
• sldphotoshopcon.exe (83.50 KB)
• sldProcMon.exe (1.33 MB)
• sldSettingsAdmin.exe (271.50 KB)
• sldShellExtServer.exe (86.00 KB)
• SldToolboxConfigure.exe (8.77 MB)
• sldtoolboxupdater.exe (601.00 KB)
• SLDWORKS.exe (1,014.00 KB)
• sldworks_fs.exe (311.00 KB)
• swShellFileLauncher.exe (359.50 KB)
• swspmanager.exe (132.50 KB)
• testconsole.exe (37.50 KB)
• UtlReportViewer.exe (236.00 KB)
• x264.exe (11.96 MB)
• pidcollector.exe (24.00 KB)
• innovahxreg.exe (61.54 KB)
• swCefSubProc.exe (313.00 KB)
• circuitworks.exe (919.00 KB)
• driveworksxpressdt.exe (15.50 KB)
• Dsgnchkbldu.exe (2.33 MB)
• DsgnChkDesignBinderu.exe (257.00 KB)
• efdsolver.exe (4.56 MB)
• ffmpeg.exe (17.74 MB)
• IwSwStreamManager.exe (15.75 KB)
• myproducts.exe (2.13 MB)
• foundrycrashhandler.exe (1.03 MB)
• photoview360.exe (744.88 KB)
• photoview360_cl.exe (728.88 KB)
• ShellingAPI.exe (41.23 KB)
• copyoptwiz.exe (5.90 MB)
• swactwiz.exe (11.07 MB)
• swactwizhelpersc.exe (3.76 MB)
• swactwiz_s.exe (11.07 MB)
• swinstactsvc.exe (1.52 MB)
• swlicservinst.exe (357.50 KB)
• check.exe (196.29 KB)
• check_net.exe (470.87 KB)
• cos2abq.exe (1.74 MB)
• cos2ans.exe (1.49 MB)
• cos2nas.exe (1.92 MB)
• cos2pat.exe (1.45 MB)
• cos2xds.exe (1.26 MB)
• cwanalysisproc.exe (92.00 KB)
• cwmeshproc.exe (29.00 KB)
• dpost.exe (1.24 MB)
• dstar.exe (3.04 MB)
• fat.exe (2.03 MB)
• ghs3d.exe (2.73 MB)
• ghs3dv3.exe (2.42 MB)
• hstar.exe (3.07 MB)
• ids2cos.exe (1.74 MB)
• nstar.exe (229.87 KB)
• pre1.exe (35.00 KB)
• renum.exe (35.00 KB)
• SOLIDWORKS Simulation Network Share.exe (1.38 MB)
• star.exe (14.73 MB)
• stopt.exe (555.00 KB)
• stres.exe (1.24 MB)
• sysinf.exe (121.87 KB)
• smatoctoscaservermain.exe (66.23 KB)
• smatrttstructsmoothmain.exe (51.23 KB)
• smatsocosmosjobchecker.exe (55.23 KB)
• smatsocosmossetlc.exe (60.23 KB)
• smatsofeminclude.exe (85.23 KB)
• smatsofemmodif.exe (114.73 KB)
• smatsofemtoonf.exe (90.73 KB)
• smatsorestovtm.exe (90.23 KB)
• smatsotoscaopt.exe (10.76 MB)
• smatsotoscaprep.exe (13.37 MB)
• smatsotoscapython.exe (25.23 KB)
• python.exe (97.52 KB)
• pythonw.exe (96.02 KB)
• cosmossupporttool.exe (249.29 KB)
• material.exe (345.27 KB)
• simulation cleaning utility.exe (383.00 KB)
• sldBenchmark.exe (4.05 MB)
• PropertyTabBuilder.exe (991.00 KB)
• GtReportManager.exe (285.50 KB)
• sldimport.exe (205.00 KB)
• cnextmproc.exe (18.84 KB)
• spaxchildconnect.exe (21.82 KB)
• spaxchildprocess.exe (18.82 KB)
• spaxchilduconnectacis.exe (21.82 KB)
• spaxchilduconnectcgm.exe (21.32 KB)
• spaxchilduconnectps.exe (21.32 KB)
• spa_lic_app.exe (397.82 KB)
• DTSCoordinatorService.exe (77.50 KB)
• DTSMonitor.exe (567.50 KB)
• DTSServiceManager.exe (21.00 KB)
• swboengine.exe (1.44 MB)
• swScheduler.exe (4.09 MB)
• drawcompare.exe (237.29 KB)
• PresentationStudioThemeEditor.exe (2.31 MB)
• DatabaseConverter.exe (46.50 KB)
• sldsetdocprop.exe (10.91 MB)
• UpdateBrowserDatabase.exe (686.00 KB)
• Treehouse.exe (2.67 MB)

...click to view all...

The information on this page is only about version 1.0.0000 of Power Shelling for SOLIDWORKS 2020. When planning to uninstall Power Shelling for SOLIDWORKS 2020 you should check if the following data is left behind on your PC.

Folders left behind when you uninstall Power Shelling for SOLIDWORKS 2020:

• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS

The files below were left behind on your disk when you remove Power Shelling for SOLIDWORKS 2020:

• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\ace.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admhoops.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admhusk.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\admicon.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\adobepdfl.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\adobexmp.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\agm.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\a.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ambient.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\angle.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\b.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\c.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\camera.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\color.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cone_angle.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_f1.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_func.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_harmonic.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_spline.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_step.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cosmos_motion_vi.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\cwplot.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\diffuse.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\distance.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_in.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_in_out.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\ease_out.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddengrey.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddenremoved.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\hiddenvisible.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\light_off.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\light_on.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\mating.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\motion_task.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\move.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\move_no_solve.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\nocolor.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\perspective.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\pv_ambientlight_off.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\pv_ambientlight_on.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\reverse_direction.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sectionview.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\shaded.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\shadededges.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sketch.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\sketch_dim.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\snap.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\specularity.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\spot_exponent.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\stress_plot.png
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\transparency.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewp.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewstate_hidden.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\viewstate_shown.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\animator\data\images\wireframe.gif
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\annotationcplu.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationOperation.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationUI.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\AnnotationWPF.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\API_GB.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\apihelp.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\apihelp.chw
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\cworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\cworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\dsgnchkapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\dsgnchkapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodelapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodelapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\emodeltoolkit.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\fworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\fworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HelpViewer\sldworksapi\apihelpviewer.cab
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HelpViewer\sldworksapi\helpcontentsetup.msha
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HelpViewer\swconst\apienumshelpviewer.cab
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HelpViewer\swconst\helpcontentsetup.msha
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi.hxc
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi.hxt
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi_a.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi_d.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi_f.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi_k.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_sldworksapi_n.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst.hxc
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst.hxt
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst_a.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst_d.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst_f.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst_k.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\col_swconst_n.hxk
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\innovahxreg.exe
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\sldworksapi.hxs
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\HTMLHelp2x\swconst.hxs
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\obsoleteapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pdmworksapi.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pdmworksapivb6.chm
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\pidcollector.exe
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\PDMWorks.Interop.pdmworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\redist.txt
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.cosworks.dll
• C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\api\redist\SolidWorks.Interop.dsgnchk.dll

Registry keys:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|api|redist|SolidWorks.Interop.cosworks.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|dznet.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|sldPropertyTabBuilder|microsoft.office.interop.excel.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|sldxps.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|SOLIDWORKS Corp|SOLIDWORKS|SolidWorks.MacroBuilder.dll
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{A0BDEF34-4269-448C-9C7C-0036BD57F7A6}
• HKEY_LOCAL_MACHINE\Software\nPower Software\Power Shelling for SOLIDWORKS 2020

Additional values that you should remove:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\sldtoolboxupdater.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\SOLIDWORKS Corp\SOLIDWORKS\sldtoolboxupdater.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CoordinatorServiceHost\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\impi_hydra\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\RemoteSolverDispatcher\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SWVisualize2021.BoostService\ImagePath
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SWVisualize2021.Queue.Server\ImagePath

A way to erase Power Shelling for SOLIDWORKS 2020 with the help of Advanced Uninstaller PRO

Power Shelling for SOLIDWORKS 2020 is a program released by nPower Software. Some people want to remove it. Sometimes this is hard because removing this by hand takes some knowledge related to removing Windows programs manually. One of the best SIMPLE approach to remove Power Shelling for SOLIDWORKS 2020 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and all around tool to maximize the performance of your PC.

DOWNLOAD NOW

• navigate to Download Link
• download the program by clicking on the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take your time to get familiar with the program's interface and number of tools available. Advanced Uninstaller PRO is a very useful package of utilities.

3. Press the General Tools category


4. Click on the Uninstall Programs tool


5. All the applications installed on your PC will be shown to you

6. Scroll the list of applications until you find Power Shelling for SOLIDWORKS 2020 or simply activate the Search feature and type in "Power Shelling for SOLIDWORKS 2020". If it exists on your system the Power Shelling for SOLIDWORKS 2020 application will be found very quickly. Notice that after you click Power Shelling for SOLIDWORKS 2020 in the list , some information regarding the program is shown to you:

• Star rating (in the lower left corner). This explains the opinion other users have regarding Power Shelling for SOLIDWORKS 2020, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Details regarding the application you are about to uninstall, by clicking on the Properties button.

For example you can see that for Power Shelling for SOLIDWORKS 2020:

• The web site of the application is: http://www.nPowerSoftware.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{A0BDEF34-4269-448C-9C7C-0036BD57F7A6}\setup.exe

7. Press the Uninstall button. A confirmation page will show up. Confirm the uninstall by pressing Uninstall. Advanced Uninstaller PRO will then remove Power Shelling for SOLIDWORKS 2020.


8. After removing Power Shelling for SOLIDWORKS 2020, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to perform the cleanup. All the items that belong Power Shelling for SOLIDWORKS 2020 which have been left behind will be detected and you will be able to delete them. By uninstalling Power Shelling for SOLIDWORKS 2020 with Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your disk.

Your computer will remain clean, speedy and able to run without errors or problems.

Disclaimer

The text above is not a recommendation to remove Power Shelling for SOLIDWORKS 2020 by nPower Software from your PC, we are not saying that Power Shelling for SOLIDWORKS 2020 by nPower Software is not a good application. This text simply contains detailed info on how to remove Power Shelling for SOLIDWORKS 2020 supposing you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.