PTC Creo Parametric Version 10.0.1.0

A guide to uninstall PTC Creo Parametric Version 10.0.1.0 from your system

PTC Creo Parametric Version 10.0.1.0 is a Windows program. Read more about how to remove it from your PC. It was developed for Windows by PTC. You can find out more on PTC or check for application updates here. Please open http://www.ptc.com/product/creo/parametric if you want to read more on PTC Creo Parametric Version 10.0.1.0 on PTC's web page. The program is usually found in the C:\Program Files\PTC\Creo 10.0.1.0\Parametric directory (same installation drive as Windows). The full command line for removing PTC Creo Parametric Version 10.0.1.0 is C:\Program Files\PTC\Creo 10.0.1.0\InstallManager\pim_rm.exe. Note that if you will type this command in Start / Run Note you may receive a notification for administrator rights. parametric.exe is the PTC Creo Parametric Version 10.0.1.0's main executable file and it takes circa 40.63 MB (42604000 bytes) on disk.

PTC Creo Parametric Version 10.0.1.0 contains of the executables below. They occupy 81.26 MB (85207488 bytes) on disk.

• cocreatesim.exe (40.63 MB)
• parametric.exe (40.63 MB)

This info is about PTC Creo Parametric Version 10.0.1.0 version 10.0.1.0 alone. Quite a few files, folders and registry data can be left behind when you remove PTC Creo Parametric Version 10.0.1.0 from your PC.

You should delete the folders below after you uninstall PTC Creo Parametric Version 10.0.1.0:

• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric

The files below are left behind on your disk by PTC Creo Parametric Version 10.0.1.0's application uninstaller when you removed it:

• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\cocreatesim.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\cocreatesim.exe
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\cocreatesim.psf
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\convert_image.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\dcadsetup.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\dcadshutdown.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\modelcheck.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric.exe
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric.psf
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric_borrow.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\chinese_cn\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\chinese_tw\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\created.reg
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\creo_templates.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\french\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\german\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\Image.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\italian\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\japanese\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\korean\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\pma.p.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\portuguese_br\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\psf_templates.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\russian\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\sessioninfo.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pim\xml\spanish\translations.xml
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pro_mcs_comp.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\pro_ncl_cvt.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\procvtutil.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\progpostg.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\progpostl.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\progpostq.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\protab.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\protk_unlock.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\ptcborrow.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\ptcdbatch.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\ptcflush.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\ptchostid.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\ptcstatus.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\purge.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\reconfigure.lnk
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\uninstall.lnk
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\vb_api_register.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\vb_api_unregister.bat
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creo_logo_ui_editor.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creo_plus.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creo_render_studio.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creo_system_monitor16x16.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creohelp.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\creologo.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\dbatchc.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\direct.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\dsm.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\layout.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\license_server.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\modelcheck.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\optionsmodeler.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\parametric.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\pim.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\ptc.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\schematic.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\simulate.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\install\nt\sketch.ico
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\text\compiled_resource\aps_ui_default_resources.dll
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\text\usascii\aps.cmp
• C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\text\usascii\apsmsg.ndx
• C:\Users\%user%\AppData\Local\Packages\Microsoft.Windows.Search_cw5n1h2txyewy\LocalState\AppIconCache\100\PTC_Creo_Parametric_10_0_1_0
• C:\Users\%user%\AppData\Local\PTC\QualityAgent\Outbox\PTC_Creo_Parametric_20231022130513@fac9ffa49749a8b71fc04f272719c90812a8cffb.zip
• C:\Users\%user%\AppData\Local\PTC\QualityAgent\SentFiles\PTC_Creo_Parametric_20231021155136@142544b85f75509a57f7dc9973b16bf3b633420c.zip
• C:\Users\%user%\AppData\Local\PTC\QualityAgent\UnprocessedFiles\PTC_Creo_Parametric_10_0_10010.20231022130513.xml

Registry keys:

• HKEY_CURRENT_USER\Software\PTC\Creo_Parametric
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\PTC Creo Parametric Version 10.0.1.0
• HKEY_LOCAL_MACHINE\Software\PTC\PTC Creo Parametric

Use regedit.exe to remove the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\PTC\Creo 10.0.1.0\Creo 10.0.1.0\Parametric\bin\parametric.exe.FriendlyAppName

A way to erase PTC Creo Parametric Version 10.0.1.0 from your computer with Advanced Uninstaller PRO

PTC Creo Parametric Version 10.0.1.0 is a program offered by the software company PTC. Some users try to uninstall it. Sometimes this is efortful because removing this by hand takes some knowledge related to PCs. One of the best SIMPLE action to uninstall PTC Creo Parametric Version 10.0.1.0 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows system, add it. This is a good step because Advanced Uninstaller PRO is a very useful uninstaller and all around tool to take care of your Windows PC.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the DOWNLOAD NOW button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to admire Advanced Uninstaller PRO's design and wealth of features available. Advanced Uninstaller PRO is a powerful system utility.

3. Click on the General Tools button


4. Press the Uninstall Programs tool


5. All the applications existing on your PC will appear

6. Navigate the list of applications until you find PTC Creo Parametric Version 10.0.1.0 or simply click the Search feature and type in "PTC Creo Parametric Version 10.0.1.0". If it exists on your system the PTC Creo Parametric Version 10.0.1.0 program will be found very quickly. After you select PTC Creo Parametric Version 10.0.1.0 in the list of apps, some data about the application is shown to you:

• Safety rating (in the lower left corner). This explains the opinion other people have about PTC Creo Parametric Version 10.0.1.0, ranging from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details about the application you are about to remove, by clicking on the Properties button.

For example you can see that for PTC Creo Parametric Version 10.0.1.0:

• The software company is: http://www.ptc.com/product/creo/parametric
• The uninstall string is: C:\Program Files\PTC\Creo 10.0.1.0\InstallManager\pim_rm.exe

7. Press the Uninstall button. A window asking you to confirm will come up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will uninstall PTC Creo Parametric Version 10.0.1.0.


8. After uninstalling PTC Creo Parametric Version 10.0.1.0, Advanced Uninstaller PRO will ask you to run a cleanup. Press Next to go ahead with the cleanup. All the items that belong PTC Creo Parametric Version 10.0.1.0 that have been left behind will be detected and you will be able to delete them. By removing PTC Creo Parametric Version 10.0.1.0 with Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or folders are left behind on your disk.

Your Windows computer will remain clean, speedy and able to serve you properly.

Disclaimer

The text above is not a recommendation to remove PTC Creo Parametric Version 10.0.1.0 by PTC from your computer, nor are we saying that PTC Creo Parametric Version 10.0.1.0 by PTC is not a good application for your PC. This text simply contains detailed info on how to remove PTC Creo Parametric Version 10.0.1.0 supposing you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.