PTC Creo Elements/Direct Modeling Express 6.0 ( x64 )

How to uninstall PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) from your computer

You can find on this page detailed information on how to uninstall PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) for Windows. It was created for Windows by Parametric Technology GmbH. More information about Parametric Technology GmbH can be found here. More data about the software PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) can be found at http://www.ptc.com. PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) is normally set up in the C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0 directory, but this location may vary a lot depending on the user's decision when installing the application. PTC Creo Elements/Direct Modeling Express 6.0 ( x64 )'s complete uninstall command line is MsiExec.exe /X{6F60E51A-EA36-4E70-B21A-2A262C622BBE}. modeling_help.exe is the programs's main file and it takes close to 38.00 KB (38912 bytes) on disk.

The executable files below are part of PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ). They occupy about 131.28 MB (137657136 bytes) on disk.

• SD.exe (60.33 KB)
• sdkill.exe (53.34 KB)
• annotator.exe (9.91 MB)
• hps.exe (123.33 KB)
• 7za.exe (465.50 KB)
• compress.exe (66.34 KB)
• convert.exe (4.62 MB)
• cpio.exe (86.34 KB)
• PESDconv.exe (84.81 KB)
• sdcat.exe (82.34 KB)
• sleep.exe (62.34 KB)
• SolidDesigner.exe (62.10 MB)
• uncompress.exe (66.34 KB)
• unzip.exe (227.34 KB)
• xpst.exe (170.34 KB)
• zip.exe (170.33 KB)
• GoElanDump.exe (66.31 KB)
• OLAPEP.exe (16.95 MB)
• OLAPEPP.exe (72.00 KB)
• ProxyDetector.exe (48.00 KB)
• dxfdwg.exe (17.08 MB)
• modeling_help.exe (38.00 KB)
• uninstall.exe (30.00 KB)
• iges.exe (1.20 MB)
• iges2nut.exe (15.61 MB)
• ModelingWorkerConfigurator.exe (532.00 KB)
• ntprint.exe (138.34 KB)
• pnmcat.exe (133.34 KB)
• pnmflip.exe (124.84 KB)
• pnmtops.exe (148.84 KB)
• pnmtotiff.exe (294.34 KB)
• ppmquant.exe (151.84 KB)
• ppmtobmp.exe (124.84 KB)
• ppmtogray.exe (122.41 KB)
• raster.exe (160.34 KB)

...click to view all...

This info is about PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) version 60.0.00392 alone. PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) has the habit of leaving behind some leftovers.

Folders found on disk after you uninstall PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) from your computer:

• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0

The files below are left behind on your disk by PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) when you uninstall it:

• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\binx64\annotator.exe
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\binx64\hps.exe
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\binx64\iconv.dll
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\binx64\intl.dll
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\binx64\ole_anno.dll
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\add_symline.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_bom.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_bomif.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_bomlc.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_color.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_delet.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_detb.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_dim.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_equi.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_file.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_flat.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_gdt.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_hatch.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_hole_circle.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_inq.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_loadr.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_lwiz.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_lwiz_fxfer.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_lwiz_util.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_macro.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_main.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_meas.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_migr.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_pins.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_plot.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_scale.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_screw.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_secl.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_sheet.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_sktch.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_symb.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_trupd.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_util.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\am_view_sync.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\AnnoCoCreate2Creo.txt
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\AnnoCreo2CoCreate.txt
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\arr_shet.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\att_dwg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\avu.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomc_din.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomc_iso.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomc_usr.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomf_din.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomf_iso.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomf_usr.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomh_din.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomh_iso.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\bomh_usr.mi
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\check_utils.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\CoCreate_to_Creo.txt
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\common_undelete.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\cp_info.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\Creo_to_CoCreate.txt
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\customiz.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\d3dam_bom.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\defaults.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\french\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\french\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\french\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\french\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\german\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\german\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\german\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\german\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\italian\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\italian\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\italian\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\italian\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\japanese\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\japanese\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\japanese\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\japanese\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\spanish\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\spanish\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\spanish\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\local\spanish\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\aip_pc.mac
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\aip_ux.mac
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\awm_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\bom_msg.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\callhelp.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\cust.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.fre
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.ger
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.ita
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.jpn
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\db_defs.pos
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\dwgm_active.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\enable.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\maptable.csl
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\pewmme10.ms
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\pewmme10v.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\pewmme30.m
• C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\Annotation\win\desktop\aips\me10\startup\startup.m

Frequently the following registry keys will not be cleaned:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{CAEBEDAB-0BDA-4E05-B904-7909713D079D}

Use regedit.exe to delete the following additional values from the Windows Registry:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Program Files\PTC\Creo Elements\Direct Modeling Express 6.0\
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Folders\C:\Windows\Installer\{CAEBEDAB-0BDA-4E05-B904-7909713D079D}\

How to uninstall PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) from your PC with Advanced Uninstaller PRO

PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) is a program offered by the software company Parametric Technology GmbH. Some people choose to remove this application. This is efortful because performing this by hand takes some knowledge related to Windows internal functioning. One of the best EASY solution to remove PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, install it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and all around tool to take care of your PC.

DOWNLOAD NOW

• visit Download Link
• download the setup by clicking on the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and number of functions available. Advanced Uninstaller PRO is a powerful system optimizer.

3. Click on the General Tools category


4. Press the Uninstall Programs feature


5. A list of the applications existing on the PC will appear

6. Scroll the list of applications until you locate PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) or simply activate the Search feature and type in "PTC Creo Elements/Direct Modeling Express 6.0 ( x64 )". The PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) app will be found automatically. Notice that when you select PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) in the list , the following information about the application is available to you:

• Safety rating (in the left lower corner). The star rating explains the opinion other users have about PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ), from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details about the app you want to uninstall, by clicking on the Properties button.

For instance you can see that for PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ):

• The web site of the application is: http://www.ptc.com
• The uninstall string is: MsiExec.exe /X{6F60E51A-EA36-4E70-B21A-2A262C622BBE}

7. Click the Uninstall button. A confirmation window will come up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically uninstall PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ).


8. After uninstalling PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ), Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to proceed with the cleanup. All the items that belong PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) that have been left behind will be detected and you will be able to delete them. By uninstalling PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) using Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your system.

Your Windows system will remain clean, speedy and able to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to remove PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) by Parametric Technology GmbH from your PC, we are not saying that PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) by Parametric Technology GmbH is not a good application for your computer. This text only contains detailed info on how to remove PTC Creo Elements/Direct Modeling Express 6.0 ( x64 ) supposing you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.