OriginPro 8.5 OriginPro 8.5



A guide to uninstall OriginPro 8.5 from your system

OriginPro 8.5 is a Windows program. Read more about how to remove it from your PC. It is written by OriginLab Corporation. Take a look here for more info on OriginLab Corporation. Click on to get more facts about OriginPro 8.5 on OriginLab Corporation's website. Usually the OriginPro 8.5 application is placed in the C:\Program Files\OriginLab\Origin85 directory, depending on the user's option during install. The full command line for uninstalling OriginPro 8.5 is C:\Program Files\InstallShield Installation Information\{E0E49070-F2C7-402A-9D36-C9B87CA2E09D}\setup.exe -runfromtemp -l0x0009 -removeonly. Keep in mind that if you will type this command in Start / Run Note you might get a notification for admin rights. The program's main executable file is named Origin85.exe and occupies 432.00 KB (442368 bytes).

The following executable files are contained in OriginPro 8.5. They take 1.26 MB (1321472 bytes) on disk.



  • Origin85.exe (432.00 KB)
  • RunOriginFile.exe (16.00 KB)
  • Sequencer.exe (24.50 KB)
  • OClientUpdate.exe (64.00 KB)
  • Origin3DScatter.exe (15.50 KB)
  • Realtime Send Data To Wks.exe (15.00 KB)
  • Realtime Send Matrix View Image.exe (14.00 KB)
  • SendNumericDataToWks.exe (16.50 KB)
  • FirstApp.exe (20.00 KB)
  • SecondApp.exe (20.00 KB)
  • SendTextDataToWks.exe (32.00 KB)
  • Realtime Send Matrix View Image.exe (182.00 KB)
  • SendNumericDataToWks.exe (187.00 KB)
  • Realtime Send Matrix View Image.exe (212.00 KB)
  • SendNumericDataToWks.exe (40.00 KB)
...click to view all...

The current page applies to OriginPro 8.5 version 8.5 only. Following the uninstall process, the application leaves leftovers on the computer. Some of these are listed below.

Folders found on disk after you uninstall OriginPro 8.5 from your computer:
  • C:\Program Files (x86)\OriginLab\Origin85

Usually, the following files remain on disk:
  • C:\Program Files (x86)\OriginLab\Origin85\3d.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\3D.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DBARS.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DCmapError.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DError.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DMeshError.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DScatterMat.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DScatterMatErr.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DVECTOR.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3DVECTOR2.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3Ys_Y-YY.otp
  • C:\Program Files (x86)\OriginLab\Origin85\3Ys_Y-Y-Y.otp
  • C:\Program Files (x86)\OriginLab\Origin85\4Ys_YY-YY.otp
  • C:\Program Files (x86)\OriginLab\Origin85\4Ys_Y-YYY.otp
  • C:\Program Files (x86)\OriginLab\Origin85\ABFFIO.dll
  • C:\Program Files (x86)\OriginLab\Origin85\ActiveQueryBuilderXControls.ocx
  • C:\Program Files (x86)\OriginLab\Origin85\ADO.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\ANOVA1Way.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\ANOVA2Way.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\AppFile.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\AREA.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\ARROW.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\ASSAYS.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\ATI\include\FitFuncDef.h
  • C:\Program Files (x86)\OriginLab\Origin85\ATI\include\LABSTR.H
  • C:\Program Files (x86)\OriginLab\Origin85\ATI\include\ORGDLL.H
  • C:\Program Files (x86)\OriginLab\Origin85\Axabffio32.dll
  • C:\Program Files (x86)\OriginLab\Origin85\BAR.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\BAR3D.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\BASELINE.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\BASELINE.OPS
  • C:\Program Files (x86)\OriginLab\Origin85\bf_info.csv
  • C:\Program Files (x86)\OriginLab\Origin85\BOX.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\BROWSER.HTM
  • C:\Program Files (x86)\OriginLab\Origin85\bs_bitma.bmp
  • C:\Program Files (x86)\OriginLab\Origin85\BUBBLE.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\Candlestick.otp
  • C:\Program Files (x86)\OriginLab\Origin85\cimage.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\CMAP.otp
  • C:\Program Files (x86)\OriginLab\Origin85\COLUMN.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\ColumnLabel.otp
  • C:\Program Files (x86)\OriginLab\Origin85\CONTGRAY.otp
  • C:\Program Files (x86)\OriginLab\Origin85\CONTLINE.otp
  • C:\Program Files (x86)\OriginLab\Origin85\CONTOUR.otp
  • C:\Program Files (x86)\OriginLab\Origin85\ConvRandom.otp
  • C:\Program Files (x86)\OriginLab\Origin85\COUNT.OTW
  • C:\Program Files (x86)\OriginLab\Origin85\CoxPHM.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\CREATE.OTW
  • C:\Program Files (x86)\OriginLab\Origin85\createPal.otp
  • C:\Program Files (x86)\OriginLab\Origin85\CurvePreview.otp
  • C:\Program Files (x86)\OriginLab\Origin85\custom.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\FitLinear.INI
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\FitLRXErr.INI
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\FitNL.INI
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\FitPolynomial.INI
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\PeakAnalyzer.INI
  • C:\Program Files (x86)\OriginLab\Origin85\CustomTable\RegrFindXYorYX.txt
  • C:\Program Files (x86)\OriginLab\Origin85\DBRoutines.OGS
  • C:\Program Files (x86)\OriginLab\Origin85\Default.omc
  • C:\Program Files (x86)\OriginLab\Origin85\DerivPreview.otp
  • C:\Program Files (x86)\OriginLab\Origin85\DFORMD.DLL
  • C:\Program Files (x86)\OriginLab\Origin85\dforrt.dll
  • C:\Program Files (x86)\OriginLab\Origin85\digitize.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\DIGITIZE.otp
  • C:\Program Files (x86)\OriginLab\Origin85\DL35WD32.DLL
  • C:\Program Files (x86)\OriginLab\Origin85\dllcdf.dll
  • C:\Program Files (x86)\OriginLab\Origin85\dofile.ogs
  • C:\Program Files (x86)\OriginLab\Origin85\DOUBLEY.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\DROPLINE.OTP
  • C:\Program Files (x86)\OriginLab\Origin85\EBBMP2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBBMP2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBGIF2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBGIF2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBJPG2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBJPG2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBPCX2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBPCX2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBPNG2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBPNG2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBPSD2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBPSD2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBTGA2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBTGA2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\ebtif2.flt
  • C:\Program Files (x86)\OriginLab\Origin85\ebtif2.ini
  • C:\Program Files (x86)\OriginLab\Origin85\EBXPM2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBXPM2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EBXWD2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EBXWD2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\editPalTemplate.otp
  • C:\Program Files (x86)\OriginLab\Origin85\EMCGM2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EMCGM2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EMDXF2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EMDXF2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EMPCT2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EMPCT2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\EMPDF2.FLT
  • C:\Program Files (x86)\OriginLab\Origin85\EMPDF2.INI
  • C:\Program Files (x86)\OriginLab\Origin85\emps_2.flt
  • C:\Program Files (x86)\OriginLab\Origin85\emps_2.ini

You will find in the Windows Registry that the following keys will not be cleaned; remove them one by one using regedit.exe:
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{E0E49070-F2C7-402A-9D36-C9B87CA2E09D}
  • HKEY_LOCAL_MACHINE\Software\OriginLab Corporation\OriginPro 8.5


A way to remove OriginPro 8.5 from your computer with Advanced Uninstaller PRO

OriginPro 8.5 is a program marketed by OriginLab Corporation. Sometimes, people decide to remove this program. This is easier said than done because doing this by hand requires some experience related to Windows program uninstallation. One of the best SIMPLE practice to remove OriginPro 8.5 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:



1. If you don't have Advanced Uninstaller PRO already installed on your PC, add it. This is good because Advanced Uninstaller PRO is the best uninstaller and general utility to take care of your system.

DOWNLOAD NOW

2. Run Advanced Uninstaller PRO. Take some time to get familiar with the program's interface and number of features available. Advanced Uninstaller PRO is a very good program.

3. Click on the General Tools button
Go to General Tools


4. Activate the Uninstall Programs button
Go to Uninstall Programs


5. All the applications installed on the PC will be shown to you

6. Scroll the list of applications until you find OriginPro 8.5 or simply activate the Search field and type in "OriginPro 8.5". If it is installed on your PC the OriginPro 8.5 application will be found automatically. When you select OriginPro 8.5 in the list of apps, the following information regarding the application is shown to you:


  • Safety rating (in the left lower corner). The star rating tells you the opinion other people have regarding OriginPro 8.5, ranging from "Highly recommended" to "Very dangerous".
  • Opinions by other people - Click on the Read reviews button.
  • Technical information regarding the application you want to remove, by clicking on the Properties button.
For example you can see that for OriginPro 8.5:


  • The publisher is: www.OriginLab.com
  • The uninstall string is: C:\Program Files\InstallShield Installation Information\{E0E49070-F2C7-402A-9D36-C9B87CA2E09D}\setup.exe -runfromtemp -l0x0009 -removeonly
7. Click the Uninstall button. A window asking you to confirm will appear. accept the removal by pressing Uninstall. Advanced Uninstaller PRO will then remove OriginPro 8.5.
Uninstall OriginPro 8.5


8. After uninstalling OriginPro 8.5, Advanced Uninstaller PRO will offer to run a cleanup. Press Next to start the cleanup. All the items of OriginPro 8.5 that have been left behind will be found and you will be able to delete them. By removing OriginPro 8.5 with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your disk.

Your Windows PC will remain clean, speedy and ready to run without errors or problems.

DOWNLOAD NOW

Geographical user distribution

  • 10.0
  • Windows 7 (6.1)
  • Windows 8.1 (6.3)
  • Windows 8 (6.2)
  • Windows XP (5.1)
  • Windows Server 2003 (5.2)
Software Application


Disclaimer

This page is not a piece of advice to uninstall OriginPro 8.5 by OriginLab Corporation from your computer, we are not saying that OriginPro 8.5 by OriginLab Corporation is not a good application. This page simply contains detailed instructions on how to uninstall OriginPro 8.5 in case you decide this is what you want to do. The information above contains registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.

2016-06-21 / Written by Dan Armano for Advanced Uninstaller PRO

follow @danarm
Last update on: 2016-06-21 11:25:16.793