Moldex3D CADdoctor R14.0x64

How to uninstall Moldex3D CADdoctor R14.0x64 from your system

You can find on this page details on how to uninstall Moldex3D CADdoctor R14.0x64 for Windows. It is produced by CoreTech System Co., Ltd.. Check out here for more information on CoreTech System Co., Ltd.. Please open http://www.Moldex3D.com if you want to read more on Moldex3D CADdoctor R14.0x64 on CoreTech System Co., Ltd.'s page. The application is often found in the C:\Moldex3D\R14.0\CADdoctor directory (same installation drive as Windows). C:\Program Files (x86)\InstallShield Installation Information\{5F9E59B9-3EE2-4F6E-B28B-BDB3C37C2054}\setup.exe is the full command line if you want to remove Moldex3D CADdoctor R14.0x64. setup.exe is the programs's main file and it takes close to 1.13 MB (1182192 bytes) on disk.

Moldex3D CADdoctor R14.0x64 is comprised of the following executables which occupy 1.13 MB (1182192 bytes) on disk:

• setup.exe (1.13 MB)

This page is about Moldex3D CADdoctor R14.0x64 version 140.0.1512.2417 only. You can find below a few links to other Moldex3D CADdoctor R14.0x64 versions:

• 140.0.1603.2417

Some files and registry entries are frequently left behind when you uninstall Moldex3D CADdoctor R14.0x64.

Folders remaining:

• C:\UserName\R14.0\CADdoctor

Generally, the following files are left on disk:

• C:\UserName\R14.0\CADdoctor\bin.x64\AbAct.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\AbCSR.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\AbLib.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\AbMenu.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\AdekAll.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\adeKernel\adeKernel.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\adeKernel\cre_ifcprm.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\AdekIges.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\BFDll.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\CADdoctor.boot
• C:\UserName\R14.0\CADdoctor\bin.x64\CADdoctor.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\checknut\checknut.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\checknut\DekCheck.msg
• C:\UserName\R14.0\CADdoctor\bin.x64\CSR.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DASetup.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DekExProc.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\DrAbout.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\DrAct.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLib.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLibBase.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLibCeSpMf.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLibCeSpMs.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLibCeSpTd.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrLibExt.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrMain.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\DrMenu.dll
• C:\UserName\R14.0\CADdoctor\bin.x64\DrSplash.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\dsa2enf.exe
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVAPI.LIC
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVCOLORS.DEF
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT1
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT2
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT3
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT4
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT5
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT6
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT7
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT8
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\DVFONT9
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\CADDS\FONT.DAT
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_0_15.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_0_15.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_100_1000.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_100_1000.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10002.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10002.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10004.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10004.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10100.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_10100.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_1022.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_1022.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_110_0.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_110_0.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_11003.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_11003.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_11004.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_11004.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_120_0.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_120_0.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12006.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12006.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12102.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12102.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12103.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_12103.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_130_0.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_130_0.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_13005.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_13005.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_13006.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_13006.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_140_0.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_140_0.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_14000.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_14000.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_150000.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_15003.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_15003.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_15102.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_15102.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16002.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16002.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16003.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16003.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16004.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16004.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16100.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_16100.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17104.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17104.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17105.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17105.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17106.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_17106.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_18005.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_18005.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_18007.s_t
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_18007.sch_txt
• C:\UserName\R14.0\CADdoctor\bin.x64\dsa_nx\schema\sch_18106.s_t

Registry that is not cleaned:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\InstallShield_{5F9E59B9-3EE2-4F6E-B28B-BDB3C37C2054}

A way to remove Moldex3D CADdoctor R14.0x64 from your computer with Advanced Uninstaller PRO

Moldex3D CADdoctor R14.0x64 is a program released by CoreTech System Co., Ltd.. Some users want to remove this application. Sometimes this can be difficult because deleting this by hand takes some skill related to PCs. One of the best EASY solution to remove Moldex3D CADdoctor R14.0x64 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO on your system, add it. This is good because Advanced Uninstaller PRO is one of the best uninstaller and general tool to optimize your computer.

DOWNLOAD NOW

• go to Download Link
• download the setup by pressing the DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to admire the program's interface and number of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools button


4. Press the Uninstall Programs feature


5. All the applications existing on the computer will appear

6. Navigate the list of applications until you find Moldex3D CADdoctor R14.0x64 or simply activate the Search field and type in "Moldex3D CADdoctor R14.0x64". The Moldex3D CADdoctor R14.0x64 app will be found very quickly. After you select Moldex3D CADdoctor R14.0x64 in the list of apps, the following information about the application is available to you:

• Star rating (in the left lower corner). The star rating tells you the opinion other people have about Moldex3D CADdoctor R14.0x64, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Click on the Read reviews button.
• Details about the application you are about to uninstall, by pressing the Properties button.

For instance you can see that for Moldex3D CADdoctor R14.0x64:

• The web site of the application is: http://www.Moldex3D.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{5F9E59B9-3EE2-4F6E-B28B-BDB3C37C2054}\setup.exe

7. Click the Uninstall button. A confirmation window will show up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically uninstall Moldex3D CADdoctor R14.0x64.


8. After removing Moldex3D CADdoctor R14.0x64, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of Moldex3D CADdoctor R14.0x64 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Moldex3D CADdoctor R14.0x64 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your PC.

Your Windows PC will remain clean, speedy and ready to take on new tasks.

Disclaimer

The text above is not a recommendation to remove Moldex3D CADdoctor R14.0x64 by CoreTech System Co., Ltd. from your PC, nor are we saying that Moldex3D CADdoctor R14.0x64 by CoreTech System Co., Ltd. is not a good application. This page simply contains detailed instructions on how to remove Moldex3D CADdoctor R14.0x64 in case you decide this is what you want to do. The information above contains registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.