MicroCode Studio Plus

A guide to uninstall MicroCode Studio Plus from your system

This web page contains thorough information on how to remove MicroCode Studio Plus for Windows. It was created for Windows by Mecanique. Go over here for more details on Mecanique. More details about the app MicroCode Studio Plus can be seen at http://www.mecanique.co.uk/. MicroCode Studio Plus is commonly set up in the C:\Arquivos de programas\Mecanique2 folder, but this location can vary a lot depending on the user's decision while installing the application. You can remove MicroCode Studio Plus by clicking on the Start menu of Windows and pasting the command line C:\Arquivos de programas\Mecanique2\uninstall.exe. Keep in mind that you might be prompted for admin rights. CodeStudioPlus.exe is the MicroCode Studio Plus's primary executable file and it occupies close to 2.12 MB (2225152 bytes) on disk.

The following executables are contained in MicroCode Studio Plus. They take 12.82 MB (13438853 bytes) on disk.

• uninstall.exe (567.00 KB)
• CodeStudio.exe (2.13 MB)
• CodeStudioPlus.exe (2.12 MB)
• CleanHID.exe (708.00 KB)
• EasyHID.exe (870.00 KB)
• bd5gen.exe (498.00 KB)
• pbpgen.exe (505.00 KB)
• vb5gen.exe (499.00 KB)
• vc6gen.exe (529.50 KB)
• mcloader.exe (884.50 KB)
• SETUP.EXE (59.00 KB)
• _ISDEL.EXE (8.50 KB)
• MP.EXE (23.00 KB)
• PBP.EXE (180.46 KB)
• PBPL.EXE (388.00 KB)
• PBPW.EXE (368.00 KB)
• PM.EXE (71.65 KB)
• unins000.exe (667.77 KB)
• SerialCom.exe (1.35 MB)

...click to view all...

This web page is about MicroCode Studio Plus version 3.0.0.5 alone. MicroCode Studio Plus has the habit of leaving behind some leftovers.

You should delete the folders below after you uninstall MicroCode Studio Plus:

• C:\Program Files (x86)\Mecanique
• C:\UserNames\UserName\AppData\Roaming\Microsoft\Windows\Start Menu\Programs\Mecanique\MicroCode Studio Plus

The files below remain on your disk by MicroCode Studio Plus's application uninstaller when you removed it:

• C:\Program Files (x86)\Mecanique\mcs\CodeStudio.chm
• C:\Program Files (x86)\Mecanique\mcs\CodeStudio.exe
• C:\Program Files (x86)\Mecanique\mcs\CodeStudioPlus.chm
• C:\Program Files (x86)\Mecanique\mcs\CodeStudioPlus.exe
• C:\Program Files (x86)\Mecanique\mcs\default.ini
• C:\Program Files (x86)\Mecanique\mcs\dupMgr.dll
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CleanHID.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\bd5.ini
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\bd5gen.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\pbp.ini
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\pbpgen.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\vb5.ini
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\vb5gen.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\vc6.ini
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\CodeGenerators\vc6gen.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\default.ini
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\EasyHID.chm
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\EasyHID.exe
• C:\Program Files (x86)\Mecanique\mcs\EasyHID\mcHID.dll
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F627.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F627A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F628.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F628A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F648A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F687.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F688.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F689.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F690.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F73.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F737.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F74.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F747.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F76.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F767.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F77.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F777.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F87.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F870.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F871.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F873.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F873A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F874.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F874A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F876.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F876A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F877.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F877A.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F88.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F886.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F887.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F913.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F914.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F916.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F917.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\16F946.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F1220.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F1320.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2220.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2221.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2320.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2321.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2331.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2410.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F242.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2420.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2431.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2439.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2455.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F248.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2480.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F24J10.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2510.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2515.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F252.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2520.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2525.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2539.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2550.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F258.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2580.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2585.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F25J10.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2610.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2620.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F2680.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4220.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4221.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4320.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4321.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4331.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4410.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F442.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4420.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4431.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4439.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4455.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F448.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4480.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F44J10.icd
• C:\Program Files (x86)\Mecanique\mcs\ICDModels\18F4510.icd

Registry keys:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\MicroCode Studio Plus3.0.0.5

Registry values that are not removed from your PC:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\mcs\CodeStudioPlus.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\mcs\CodeStudioPlus.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\mcs\MCLoader\mcloader.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\mcs\MCLoader\mcloader.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\mcs\MPASM\MPASMWIN.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files (x86)\Mecanique\WINPIC800 3.55g\WinPic800.exe.FriendlyAppName

How to delete MicroCode Studio Plus from your PC with Advanced Uninstaller PRO

MicroCode Studio Plus is a program marketed by Mecanique. Some people want to uninstall this application. This can be difficult because doing this manually takes some advanced knowledge regarding Windows internal functioning. One of the best QUICK way to uninstall MicroCode Studio Plus is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very potent uninstaller and all around tool to maximize the performance of your computer.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take some time to get familiar with the program's design and number of features available. Advanced Uninstaller PRO is a very good package of utilities.

3. Click on the General Tools category


4. Press the Uninstall Programs button


5. A list of the programs installed on the computer will appear

6. Scroll the list of programs until you locate MicroCode Studio Plus or simply activate the Search feature and type in "MicroCode Studio Plus". If it exists on your system the MicroCode Studio Plus app will be found very quickly. Notice that when you select MicroCode Studio Plus in the list of applications, some data about the application is shown to you:

• Safety rating (in the left lower corner). This tells you the opinion other users have about MicroCode Studio Plus, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details about the app you wish to uninstall, by pressing the Properties button.

For example you can see that for MicroCode Studio Plus:

• The publisher is: http://www.mecanique.co.uk/
• The uninstall string is: C:\Arquivos de programas\Mecanique2\uninstall.exe

7. Press the Uninstall button. A confirmation dialog will show up. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will then uninstall MicroCode Studio Plus.


8. After removing MicroCode Studio Plus, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to go ahead with the cleanup. All the items that belong MicroCode Studio Plus that have been left behind will be detected and you will be asked if you want to delete them. By removing MicroCode Studio Plus using Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your PC.

Your PC will remain clean, speedy and ready to run without errors or problems.

Geographical user distribution

Disclaimer

This page is not a recommendation to uninstall MicroCode Studio Plus by Mecanique from your computer, nor are we saying that MicroCode Studio Plus by Mecanique is not a good software application. This text simply contains detailed info on how to uninstall MicroCode Studio Plus supposing you want to. Here you can find registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.