Mechanical Design Pack NX

A guide to uninstall Mechanical Design Pack NX from your computer

This web page contains detailed information on how to uninstall Mechanical Design Pack NX for Windows. It was created for Windows by MechSoft, Inc.. Open here where you can get more info on MechSoft, Inc.. Usually the Mechanical Design Pack NX program is found in the C:\Program Files (x86)\MechSoft\MeDPackNX directory, depending on the user's option during install. The full uninstall command line for Mechanical Design Pack NX is RunDll32. AuthMS.exe is the Mechanical Design Pack NX's primary executable file and it takes around 100.00 KB (102400 bytes) on disk.

The following executables are installed along with Mechanical Design Pack NX. They take about 35.48 MB (37208249 bytes) on disk.

• ToiMan.exe (24.00 KB)
• BaseView.exe (1.39 MB)
• BEAM.EXE (1.25 MB)
• Beam2S.exe (120.00 KB)
• Bearing2.exe (516.00 KB)
• Bearings.exe (596.00 KB)
• Bellspr.exe (812.00 KB)
• boltcon.exe (1.08 MB)
• Brakes.exe (556.00 KB)
• bvupd.exe (268.00 KB)
• Cams.exe (924.00 KB)
• Chains.exe (792.00 KB)
• Columns.exe (940.00 KB)
• Compress.exe (956.00 KB)
• DataWiz.exe (1.11 MB)
• ForkPin.exe (488.00 KB)
• Gear1.exe (1.42 MB)
• Gear2.exe (1.34 MB)
• gear3.exe (1,004.00 KB)
• GroupMan.exe (832.00 KB)
• Ibelts.exe (668.00 KB)
• InterJet.exe (188.00 KB)
• Joint.Exe (424.00 KB)
• key.exe (1.06 MB)
• MatEdit.exe (132.00 KB)
• MCWBolt.exe (1.28 MB)
• MnuEdit.exe (276.00 KB)
• Mscdiag.exe (360.00 KB)
• MscRun.exe (28.00 KB)
• MSCTOLER.exe (60.00 KB)
• MSLinks.exe (484.00 KB)
• Optim.exe (1.58 MB)
• ORings.exe (324.00 KB)
• Pins.exe (728.00 KB)
• PowScrew.exe (920.00 KB)
• Press_on.exe (460.00 KB)
• shaft3.exe (1.91 MB)
• Solder.exe (472.00 KB)
• Spline1.exe (472.00 KB)
• SPLINE2.EXE (568.00 KB)
• Spline3.exe (876.00 KB)
• Tension.exe (1.03 MB)
• Tolerance.exe (424.00 KB)
• Torsion.exe (1.16 MB)
• Tutorials.exe (120.00 KB)
• Vbelts.exe (724.00 KB)
• Welds.Exe (1.63 MB)
• WResizer.exe (32.00 KB)
• XLSCalc.exe (144.00 KB)
• AuthMS.exe (100.00 KB)
• AuthReq.exe (156.00 KB)
• RegAuth.exe (24.00 KB)
• Welcome.exe (676.00 KB)

...click to view all... Several files, folders and registry entries will not be removed when you are trying to remove Mechanical Design Pack NX from your computer.

Folders that were left behind:

• C:\Program Files (x86)\MechSoft\MeDPackNX

The files below were left behind on your disk when you remove Mechanical Design Pack NX:

• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\calc.mod
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CalcXLS\Thermal extensibility.xls
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CalcXLS\Variants Example.xls
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CalcXLS\VBA Example.xls
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611a.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611b.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611c.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611d.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611e.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611f.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611g.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611h.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611i.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1611j.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A165b.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A165l.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A165sl.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A165sw.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A165wn.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1A.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1B.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1C.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1d.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1e.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_2_1F.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_21_1.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_22_1.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_221b.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18_22M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18151M.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18171.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18172.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211a.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211b.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211cA.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211cB.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211da.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211db.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211ea.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211eb.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211fa.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211fb.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211ga.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211gb.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18211HC.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822A.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822B.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822C.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822D.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822e.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822f.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822g.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822h.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822i.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822j.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822k.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822l.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822m.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822n.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1822o.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18231M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18232M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18233M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18234M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18235M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18236M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18237M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18239M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18241M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18242M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18243M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18244M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18245M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18246M.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18271_1.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18271_2.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18271_3.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18271_4.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18272_6.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A18273_8.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A183_1.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A183_2.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A183_3.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A183_4.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A183_5.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1835M1.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1835M2.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862.CBF
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_1.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_2.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_3.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_4.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_5.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_6.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_7.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_8.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1862_9.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1863_1.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1863_2.cbf
• C:\Program Files (x86)\MechSoft\MeDPackNX\Data\CBF\A1863_3.cbf

Registry that is not cleaned:

• HKEY_LOCAL_MACHINE\Software\MechSoft, Inc.\Mechanical Design Pack NX
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{1C3B2D35-7BEF-4F6F-9A09-B54A3129EBE3}

How to delete Mechanical Design Pack NX from your PC using Advanced Uninstaller PRO

Mechanical Design Pack NX is an application offered by MechSoft, Inc.. Some people try to erase this application. Sometimes this is troublesome because performing this manually takes some know-how regarding Windows internal functioning. One of the best SIMPLE solution to erase Mechanical Design Pack NX is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is good because Advanced Uninstaller PRO is the best uninstaller and all around tool to clean your Windows PC.

DOWNLOAD NOW

• visit Download Link
• download the program by pressing the green DOWNLOAD button
• install Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. Take some time to admire the program's interface and wealth of features available. Advanced Uninstaller PRO is a very good package of utilities.

3. Click on the General Tools button


4. Press the Uninstall Programs tool


5. A list of the programs existing on your computer will be shown to you

6. Navigate the list of programs until you find Mechanical Design Pack NX or simply click the Search field and type in "Mechanical Design Pack NX". If it is installed on your PC the Mechanical Design Pack NX application will be found automatically. After you select Mechanical Design Pack NX in the list of apps, some data regarding the program is shown to you:

• Star rating (in the lower left corner). This explains the opinion other users have regarding Mechanical Design Pack NX, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Click on the Read reviews button.
• Details regarding the application you want to remove, by pressing the Properties button.

7. Click the Uninstall button. A confirmation window will show up. Confirm the removal by clicking the Uninstall button. Advanced Uninstaller PRO will automatically remove Mechanical Design Pack NX.


8. After removing Mechanical Design Pack NX, Advanced Uninstaller PRO will ask you to run a cleanup. Click Next to proceed with the cleanup. All the items of Mechanical Design Pack NX that have been left behind will be found and you will be able to delete them. By uninstalling Mechanical Design Pack NX with Advanced Uninstaller PRO, you can be sure that no registry entries, files or directories are left behind on your computer.

Your computer will remain clean, speedy and able to take on new tasks.

Disclaimer

The text above is not a piece of advice to uninstall Mechanical Design Pack NX by MechSoft, Inc. from your computer, we are not saying that Mechanical Design Pack NX by MechSoft, Inc. is not a good application for your PC. This page simply contains detailed instructions on how to uninstall Mechanical Design Pack NX in case you want to. Here you can find registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.