Mastercam 2018

A guide to uninstall Mastercam 2018 from your computer

You can find below details on how to uninstall Mastercam 2018 for Windows. The Windows version was developed by CNC Software, Inc.. More info about CNC Software, Inc. can be read here. More data about the software Mastercam 2018 can be seen at www.mastercam.com. Mastercam 2018 is usually set up in the C:\Program Files\Mcam2018 folder, however this location can differ a lot depending on the user's decision when installing the program. The full command line for removing Mastercam 2018 is C:\Program Files (x86)\InstallShield Installation Information\{6D85BD25-B60E-482B-838E-83A839F4EDEA}\uninstaller.exe. Keep in mind that if you will type this command in Start / Run Note you may be prompted for administrator rights. The program's main executable file occupies 439.19 KB (449728 bytes) on disk and is labeled Mastercam.exe.

The executables below are part of Mastercam 2018. They occupy an average of 109.19 MB (114496264 bytes) on disk.

• ArtServe.exe (185.00 KB)
• HaspX.exe (3.42 MB)
• Mastercam.exe (439.19 KB)
• MastercamLauncher.exe (299.20 KB)
• McamAdvConfig.exe (342.70 KB)
• MCLogr.exe (130.69 KB)
• MPDebugClient.exe (167.20 KB)
• NHaspX.exe (3.44 MB)
• UpdateCheck.exe (475.20 KB)
• UpdateNotify.exe (138.70 KB)
• UpdateShow.exe (7.86 MB)
• haspdinst.exe (14.52 MB)
• HASPUserSetup.exe (13.86 MB)
• hinstall.exe (2.95 MB)
• InventorConverter.exe (32.20 KB)
• CimcoDNC.exe (427.43 KB)
• CIMCOEdit.exe (7.34 MB)
• CIMCOEditStub.exe (27.43 KB)
• elevate.exe (12.19 KB)
• GLVersionCheck.exe (47.43 KB)
• KeyManager.exe (265.43 KB)
• mysqldump.exe (3.43 MB)
• tvClient-idcsnrehyd.exe (7.85 MB)
• vcredist2010sp1_x86.exe (8.57 MB)
• vcredist2012_x86.exe (6.25 MB)
• vcredist2013_x86.exe (6.20 MB)
• vcredist2015_x86.exe (13.13 MB)
• vcredist_x86.exe (2.58 MB)
• ActiveReports_Designer.exe (283.22 KB)
• ActiveReports_Viewer.exe (447.21 KB)
• EStamp7.exe (1.32 MB)
• CodeExpert.exe (329.70 KB)
• IOFViewer.exe (251.69 KB)
• ToolManager.exe (321.20 KB)
• UpdateManager.exe (1.95 MB)

...click to view all...

This web page is about Mastercam 2018 version 20.0.19466.0 only. Click on the links below for other Mastercam 2018 versions:

• 20.0.14713.0
• 20.0.21885.0
• 20.0.17184.0

Following the uninstall process, the application leaves some files behind on the computer. Some of these are listed below.

Folders left behind when you uninstall Mastercam 2018:

• C:\Program Files\Mcam2018
• C:\Users\%user%\AppData\Local\CNC_Software,_Inc\Mastercam_Simulator_AppDo_Path_2jwy4sxv4ploibm1hk1m0qidawcrdtun
• C:\Users\%user%\AppData\Local\CNC_Software,_Inc\Mastercam_Simulator_AppDo_Path_aj0wdhh0pqvhe32jyq445jszjjjdhkqz
• C:\Users\%user%\AppData\Local\CNC_Software,_Inc\Mastercam_Simulator_AppDo_Path_lfa2j3imrr4zs4s5bucwpbtb1rpm1m5f

The files below are left behind on your disk by Mastercam 2018's application uninstaller when you removed it:

• C:\Program Files\Mcam2018\5axcore.dll
• C:\Program Files\Mcam2018\5axmfcuiutils.dll
• C:\Program Files\Mcam2018\5axui.dll
• C:\Program Files\Mcam2018\5axutil.dll
• C:\Program Files\Mcam2018\apps\McAggrHead.dll
• C:\Program Files\Mcam2018\apps\McDef.VBB
• C:\Program Files\Mcam2018\apps\MCFileUpdateTracking.dll
• C:\Program Files\Mcam2018\apps\MCVBscript.dll
• C:\Program Files\Mcam2018\apps\MP.dll
• C:\Program Files\Mcam2018\apps\NBM.dll
• C:\Program Files\Mcam2018\apps\Nesting.dll
• C:\Program Files\Mcam2018\apps\PickoffSetup.dll
• C:\Program Files\Mcam2018\apps\VersionChecker.dll
• C:\Program Files\Mcam2018\Backplot.dll
• C:\Program Files\Mcam2018\BackplotBNCI.dll
• C:\Program Files\Mcam2018\BCGCBPRO2500140.dll
• C:\Program Files\Mcam2018\BCGPStyle2007Aqua250.dll
• C:\Program Files\Mcam2018\BCGPStyle2007Luna250.dll
• C:\Program Files\Mcam2018\BCGPStyle2007Obsidian250.dll
• C:\Program Files\Mcam2018\BCGPStyle2007Silver250.dll
• C:\Program Files\Mcam2018\BCGPStyle2010Black250.dll
• C:\Program Files\Mcam2018\BCGPStyle2010Blue250.dll
• C:\Program Files\Mcam2018\BCGPStyle2010White250.dll
• C:\Program Files\Mcam2018\BCGPStyleCarbon250.dll
• C:\Program Files\Mcam2018\BCGPStyleScenic250.dll
• C:\Program Files\Mcam2018\CfpCommandTracker.Interop.dll
• C:\Program Files\Mcam2018\cfpLang.dat
• C:\Program Files\Mcam2018\chooks\5axmsurf.dll
• C:\Program Files\Mcam2018\chooks\5axmsurf.ft
• C:\Program Files\Mcam2018\chooks\5xUtility.ft
• C:\Program Files\Mcam2018\chooks\Aggregat.dll
• C:\Program Files\Mcam2018\chooks\agiereg.dll
• C:\Program Files\Mcam2018\chooks\Arc3D.dll
• C:\Program Files\Mcam2018\chooks\ArcMultiEdit.dll
• C:\Program Files\Mcam2018\chooks\Asphere.dll
• C:\Program Files\Mcam2018\chooks\atp.ft
• C:\Program Files\Mcam2018\chooks\atp\Infragistics.Shared.v4.3.dll
• C:\Program Files\Mcam2018\chooks\atp\Infragistics.Win.UltraWinGrid.v4.3.dll
• C:\Program Files\Mcam2018\chooks\atp\Infragistics.Win.v4.3.dll
• C:\Program Files\Mcam2018\chooks\atp\XATP.dll
• C:\Program Files\Mcam2018\chooks\BlankDuplicates.dll
• C:\Program Files\Mcam2018\chooks\BreakCircles.dll
• C:\Program Files\Mcam2018\chooks\CANDY.EQN
• C:\Program Files\Mcam2018\chooks\CD_Compare.ft
• C:\Program Files\Mcam2018\chooks\CD_Compare\CD_Compare.dll
• C:\Program Files\Mcam2018\chooks\CD_Compare\CDC.dll
• C:\Program Files\Mcam2018\chooks\CheckHolder.dll
• C:\Program Files\Mcam2018\chooks\CHIP.EQN
• C:\Program Files\Mcam2018\chooks\Comp3D.dll
• C:\Program Files\Mcam2018\chooks\ConsToSpline.dll
• C:\Program Files\Mcam2018\chooks\CoonsSurf.dll
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter.ft
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter\CoroPlusImporter.dll
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter\CoroPlusImportMap.xml
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter\Microsoft.AspNet.SignalR.Client.dll
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter\Newtonsoft.Json.dll
• C:\Program Files\Mcam2018\chooks\CoroPlusImporter\SandvikConnectionProvider.dll
• C:\Program Files\Mcam2018\chooks\CreateBoundary.dll
• C:\Program Files\Mcam2018\chooks\CreateBoundary.ft
• C:\Program Files\Mcam2018\chooks\CreateFillets.dll
• C:\Program Files\Mcam2018\chooks\CVIEW.mcam
• C:\Program Files\Mcam2018\chooks\DRAIN.EQN
• C:\Program Files\Mcam2018\chooks\DrillPt.dll
• C:\Program Files\Mcam2018\chooks\DXFRescuer.dll
• C:\Program Files\Mcam2018\chooks\ELLIPSD.EQN
• C:\Program Files\Mcam2018\chooks\engrave.dll
• C:\Program Files\Mcam2018\chooks\ENGRAVE.FT
• C:\Program Files\Mcam2018\chooks\FindOverlap.dll
• C:\Program Files\Mcam2018\chooks\FlattenSurf.dll
• C:\Program Files\Mcam2018\chooks\Focus5ax.dll
• C:\Program Files\Mcam2018\chooks\fplot.dll
• C:\Program Files\Mcam2018\chooks\Gear.dll
• C:\Program Files\Mcam2018\chooks\GridPock.dll
• C:\Program Files\Mcam2018\chooks\HoleTable.dll
• C:\Program Files\Mcam2018\chooks\INVOL.EQN
• C:\Program Files\Mcam2018\chooks\IOF.MC.FT
• C:\Program Files\Mcam2018\chooks\MachiningCloudImporter.ft
• C:\Program Files\Mcam2018\chooks\MachiningCloudImporter\MachiningCloudImporter.dll
• C:\Program Files\Mcam2018\chooks\MachiningCloudImporter\MachiningCloudImportMap.xml
• C:\Program Files\Mcam2018\chooks\machsim.dll
• C:\Program Files\Mcam2018\chooks\machsim.ft
• C:\Program Files\Mcam2018\chooks\map.dll
• C:\Program Files\Mcam2018\chooks\MastercamDirect.dll
• C:\Program Files\Mcam2018\chooks\MC_chooks.ft
• C:\Program Files\Mcam2018\chooks\MCCommandFinder.dll
• C:\Program Files\Mcam2018\chooks\MCCommandFinder.FT
• C:\Program Files\Mcam2018\chooks\MCDigitize.dll
• C:\Program Files\Mcam2018\chooks\mcprobe.ft
• C:\Program Files\Mcam2018\chooks\MD_CD_PST_Rename.dll
• C:\Program Files\Mcam2018\chooks\MD_CD_PST_Rename.ft
• C:\Program Files\Mcam2018\chooks\MD_CD_PST_Rename_Interop.dll
• C:\Program Files\Mcam2018\chooks\MedialAxis.dll
• C:\Program Files\Mcam2018\chooks\metafile.dll
• C:\Program Files\Mcam2018\chooks\mpbinX.dll
• C:\Program Files\Mcam2018\chooks\mwMachineConverter.dll
• C:\Program Files\Mcam2018\chooks\mwMachineConverter.ft
• C:\Program Files\Mcam2018\chooks\prob2spl.dll
• C:\Program Files\Mcam2018\chooks\Pts2Arcs.dll
• C:\Program Files\Mcam2018\chooks\PullUp.dll
• C:\Program Files\Mcam2018\chooks\Rast2vec.dll

You will find in the Windows Registry that the following data will not be uninstalled; remove them one by one using regedit.exe:

• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Common Files|Mastercam|MastercamLicensing|ActivationWizard.exe
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|CfpCommandTracker.Interop.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|atp|Infragistics.Shared.v4.3.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|atp|Infragistics.Win.UltraWinGrid.v4.3.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|atp|Infragistics.Win.v4.3.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|CoroPlusImporter|CoroPlusImporter.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|CoroPlusImporter|Microsoft.AspNet.SignalR.Client.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|CoroPlusImporter|Newtonsoft.Json.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|CoroPlusImporter|SandvikConnectionProvider.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|MD_CD_PST_Rename.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|chooks|Zip2Go|C1.C1Zip.2.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|ACISDATA|SpaceClaimDocument.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Calendar.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Chart.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Design.Win.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Diagnostics.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Document.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Document.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Excel.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Html.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Image.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Pdf.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Rdf.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Word.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Xaml.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Export.Xml.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Extensibility.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Interop.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|common|reports|GrapeCity.ActiveReports.Viewer.Win.v9.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|DebuggingClientServerShared.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.BarCode.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.DataGrid.Contrib.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Docking.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Editors.Interop.DataGrid.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Editors.Interop.PropertyGrid.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Editors.Interop.Ribbon.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Editors.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Gauge.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Navigation.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.PropertyGrid.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Ribbon.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Shared.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.SyntaxEditor.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Text.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Themes.Office.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Views.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ActiproSoftware.Wizard.Wpf.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|AxProtector.UI.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|CodeExpert.exe
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|CodeExpert.Interprocess.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|CodeExpert.Shared.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|CodeExpert.Workspace.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Editor.Core.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Editor.Models.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Editor.Workspace.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|GAFControl.Interop.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|IOF.MC.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|IOFAPI.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|IronPython.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|IronPython.Modules.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Machine.Core.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Machine.Models.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MachineBuilder.Models.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MastercamExtensions.GAF.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MastercamExtensions.ImportExport.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MastercamExtensions.Infrastructure.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MastercamExtensions.Localization.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|MastercamExtensions.Shell.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Dynamic.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.EnterpriseLibrary.Common.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.EnterpriseLibrary.ExceptionHandling.Logging.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.EnterpriseLibrary.Logging.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Prism.Composition.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Prism.Mvvm.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Prism.PubSubEvents.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Prism.SharedInterfaces.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Prism.UnityExtensions.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.ServiceLocation.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Practices.Unity.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Scripting.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.Scripting.Metadata.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.WindowsAPICodePack.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|Microsoft.WindowsAPICodePack.Shell.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|PostEngine.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ServiceClient.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|SyncManager.Core.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|System.Data.SQLite.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|System.Data.SQLite.Linq.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|System.Linq.Dynamic.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|TlCoreAPI.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.Core.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.Database.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.exe
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.Interop.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.Interprocess.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.ServiceClient.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.Shared.dll
• HKEY_CLASSES_ROOT\Installer\Assemblies\C:|Program Files|Mcam2018|Extensions|ToolManager.ToolWizard.dll

Use regedit.exe to remove the following additional values from the Windows Registry:

• HKEY_CLASSES_ROOT\Installer\Features\B1DE2A563D866B142B47E03DC69ECB76\Mastercam
• HKEY_CLASSES_ROOT\Installer\Features\B7B2E66B8DB6DB9418C584FB882D4460\Mastercam
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\Common Files\Mastercam\McamVersionSelector.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\8995C42BCB0F9B4418D6DFF9BC3792A0\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\B1DE2A563D866B142B47E03DC69ECB76\ProductName
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\B7B2E66B8DB6DB9418C584FB882D4460\ProductName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\UserSettings\S-1-5-21-3864433002-2882280772-1654201752-1001\\Device\HarddiskVolume3\Program Files\Mcam2018\Mastercam.exe

A way to remove Mastercam 2018 from your PC with Advanced Uninstaller PRO

Mastercam 2018 is a program marketed by CNC Software, Inc.. Sometimes, computer users decide to erase this application. This is troublesome because removing this by hand takes some advanced knowledge regarding removing Windows applications by hand. The best QUICK manner to erase Mastercam 2018 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows system, install it. This is a good step because Advanced Uninstaller PRO is a very useful uninstaller and all around utility to take care of your Windows system.

DOWNLOAD NOW

• navigate to Download Link
• download the setup by clicking on the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to admire the program's design and number of tools available. Advanced Uninstaller PRO is a very useful Windows tool.

3. Press the General Tools category


4. Click on the Uninstall Programs feature


5. A list of the applications existing on the computer will be made available to you

6. Navigate the list of applications until you find Mastercam 2018 or simply activate the Search feature and type in "Mastercam 2018". If it exists on your system the Mastercam 2018 application will be found automatically. When you select Mastercam 2018 in the list of applications, some information about the program is available to you:

• Safety rating (in the lower left corner). The star rating tells you the opinion other users have about Mastercam 2018, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other users - Press the Read reviews button.
• Details about the application you wish to uninstall, by clicking on the Properties button.

For instance you can see that for Mastercam 2018:

• The web site of the program is: www.mastercam.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{6D85BD25-B60E-482B-838E-83A839F4EDEA}\uninstaller.exe

7. Click the Uninstall button. A confirmation page will appear. accept the uninstall by pressing the Uninstall button. Advanced Uninstaller PRO will then uninstall Mastercam 2018.


8. After uninstalling Mastercam 2018, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to go ahead with the cleanup. All the items that belong Mastercam 2018 that have been left behind will be found and you will be able to delete them. By removing Mastercam 2018 using Advanced Uninstaller PRO, you can be sure that no Windows registry entries, files or folders are left behind on your system.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a piece of advice to uninstall Mastercam 2018 by CNC Software, Inc. from your computer, we are not saying that Mastercam 2018 by CNC Software, Inc. is not a good software application. This text only contains detailed instructions on how to uninstall Mastercam 2018 in case you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.