MELSOFT FR Configurator SW3

How to uninstall MELSOFT FR Configurator SW3 from your computer

This page contains thorough information on how to remove MELSOFT FR Configurator SW3 for Windows. The Windows release was created by MITSUBISHI ELECTRIC CORPORATION. Go over here where you can read more on MITSUBISHI ELECTRIC CORPORATION. The application is usually located in the C:\Program Files (x86)\MELSOFT\invsup3_e directory (same installation drive as Windows). MELSOFT FR Configurator SW3's full uninstall command line is C:\Program Files (x86)\InstallShield Installation Information\{E0D7950C-C6FC-46B5-8A01-387AE97B85FA}\setup.exe -runfromtemp -l0x0009 -removeonly. invsup3_e.exe is the MELSOFT FR Configurator SW3's primary executable file and it occupies circa 476.00 KB (487424 bytes) on disk.

MELSOFT FR Configurator SW3 is comprised of the following executables which take 736.00 KB (753664 bytes) on disk:

• ComTaskEz.exe (120.00 KB)
• invsup3_e.exe (476.00 KB)
• Melconv_e.exe (140.00 KB)

This data is about MELSOFT FR Configurator SW3 version 3.30.0002 alone. You can find below info on other application versions of MELSOFT FR Configurator SW3:

• 3.41.0001
• 5.40.0014
• 4.81.0001
• 4.80.0008
• 3.40.0006
• 5.10.0008
• 0.30.0003
• 3.20.0004
• 4.90.0006
• 5.31.0002
• 5.11.0001
• 3.00.0010
• 5.00.0025
• 5.21.0001
• 4.40.0004
• 5.10.0007
• 3.30.0000
• 3.01.0000
• 5.50.0011

...click to view all...
After the uninstall process, the application leaves leftovers on the PC. Part_A few of these are listed below.

Folders left behind when you uninstall MELSOFT FR Configurator SW3:

• C:\Program Files\MELSOFT\invsup3_e

The files below were left behind on your disk when you remove MELSOFT FR Configurator SW3:

• C:\Program Files\MELSOFT\invsup3_e\CBGItem.dll
• C:\Program Files\MELSOFT\invsup3_e\CBGItem.tlb
• C:\Program Files\MELSOFT\invsup3_e\CBGraph.ocx
• C:\Program Files\MELSOFT\invsup3_e\ComTaskEz.exe
• C:\Program Files\MELSOFT\invsup3_e\dp_ram.dll
• C:\Program Files\MELSOFT\invsup3_e\en\help\a700ec.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a700en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a700na.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a701en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a760na.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7acen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7alen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7anen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7apen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7aren.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7axen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7ayen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7azen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7ncaen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nceen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7ncen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7ncnen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7ndeen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nden.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7neen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nfen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nleen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nlen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7npeen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7npen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\a7nsen.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\d700ec.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\d700en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\d700na.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\e700ec.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\e700en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\e700na.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\f700ec.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\f700en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\f700na.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\sw3en.chm
• C:\Program Files\MELSOFT\invsup3_e\en\help\sw3en.chw
• C:\Program Files\MELSOFT\invsup3_e\en\html\10_File.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\11_File.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\12_File.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\20_Easy.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\21_Easy.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\30_Func.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\31_Func.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\32_Func.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\40_Help.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\41_Help.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\exit.gif
• C:\Program Files\MELSOFT\invsup3_e\en\html\fr_sample.bmp
• C:\Program Files\MELSOFT\invsup3_e\en\html\fr_startup.JPG
• C:\Program Files\MELSOFT\invsup3_e\en\html\StartUp.htm
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500_ch_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500l_gec.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500l_gna.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a500l_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a560_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a560l_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700_cht.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700l_cht.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700l_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700l_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a700l_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a701_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a760_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_a760l_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_d700_cht.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_d700_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_d700_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_d700_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e520_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e520_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e540_ch_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e540_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e540_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e540_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e700_cht.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e700_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e700_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_e700_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500_ch_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500l_ec_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500l_gch.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500l_na_.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500l_sch.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f500l_std.vfd
• C:\Program Files\MELSOFT\invsup3_e\en\param\fr_f700_ch_.vfd

Use regedit.exe to manually remove from the Windows Registry the data below:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\F914A13F7E94EF8409E91E3AC9EDE080
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{E0D7950C-C6FC-46B5-8A01-387AE97B85FA}
• HKEY_LOCAL_MACHINE\Software\MITSUBISHI ELECTRIC CORPORATION\MELSOFT FR Configurator SW3

Open regedit.exe to delete the registry values below from the Windows Registry:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\F914A13F7E94EF8409E91E3AC9EDE080\ProductName

How to erase MELSOFT FR Configurator SW3 from your PC using Advanced Uninstaller PRO

MELSOFT FR Configurator SW3 is an application marketed by the software company MITSUBISHI ELECTRIC CORPORATION. Some people decide to remove this program. This is hard because removing this manually takes some skill regarding Windows program uninstallation. One of the best EASY solution to remove MELSOFT FR Configurator SW3 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your system, install it. This is good because Advanced Uninstaller PRO is a very efficient uninstaller and all around tool to optimize your computer.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the green DOWNLOAD button
• set up Advanced Uninstaller PRO

2. Start Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and wealth of features available. Advanced Uninstaller PRO is a very useful system optimizer.

3. Press the General Tools category


4. Activate the Uninstall Programs feature


5. A list of the applications existing on your computer will be made available to you

6. Scroll the list of applications until you locate MELSOFT FR Configurator SW3 or simply activate the Search field and type in "MELSOFT FR Configurator SW3". If it is installed on your PC the MELSOFT FR Configurator SW3 program will be found very quickly. Notice that after you click MELSOFT FR Configurator SW3 in the list of applications, some information about the program is made available to you:

• Star rating (in the left lower corner). This explains the opinion other people have about MELSOFT FR Configurator SW3, ranging from "Highly recommended" to "Very dangerous".
• Opinions by other people - Press the Read reviews button.
• Technical information about the app you want to uninstall, by pressing the Properties button.

7. Click the Uninstall button. A confirmation page will come up. Confirm the uninstall by clicking Uninstall. Advanced Uninstaller PRO will then uninstall MELSOFT FR Configurator SW3.


8. After removing MELSOFT FR Configurator SW3, Advanced Uninstaller PRO will offer to run a cleanup. Click Next to perform the cleanup. All the items that belong MELSOFT FR Configurator SW3 that have been left behind will be found and you will be asked if you want to delete them. By removing MELSOFT FR Configurator SW3 using Advanced Uninstaller PRO, you are assured that no Windows registry items, files or directories are left behind on your disk.

Your Windows computer will remain clean, speedy and ready to run without errors or problems.

Geographical user distribution

Disclaimer

The text above is not a piece of advice to remove MELSOFT FR Configurator SW3 by MITSUBISHI ELECTRIC CORPORATION from your computer, we are not saying that MELSOFT FR Configurator SW3 by MITSUBISHI ELECTRIC CORPORATION is not a good application for your PC. This text simply contains detailed instructions on how to remove MELSOFT FR Configurator SW3 supposing you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' computers.