Integration Extension for Revit and Robot Structural Analysis 2026

A guide to uninstall Integration Extension for Revit and Robot Structural Analysis 2026 from your PC

Integration Extension for Revit and Robot Structural Analysis 2026 is a Windows program. Read more about how to uninstall it from your PC. It was developed for Windows by Autodesk, Inc.. Further information on Autodesk, Inc. can be seen here. The application is frequently installed in the C:\Program Files\Autodesk directory (same installation drive as Windows). C:\Program Files\Autodesk\AdODIS\V1\Installer.exe -i uninstall --trigger_point system -m C:\ProgramData\Autodesk\ODIS\metadata\{301030A9-76CF-3551-A9AB-4E981DBEA05F}\bundleManifest.xml -x C:\ProgramData\Autodesk\ODIS\metadata\{301030A9-76CF-3551-A9AB-4E981DBEA05F}\SetupRes\manifest.xsd is the full command line if you want to remove Integration Extension for Revit and Robot Structural Analysis 2026. The program's main executable file is labeled Revit.exe and it has a size of 1.57 MB (1642776 bytes).

Integration Extension for Revit and Robot Structural Analysis 2026 is composed of the following executables which occupy 705.00 MB (739248560 bytes) on disk:

• Installer.exe (27.00 MB)
• RemoveODIS.exe (6.60 MB)
• AdskAccessCore.exe (27.58 MB)
• RemoveAccess.exe (6.55 MB)
• 7za.exe (1.10 MB)
• AdskAccessDialogUtility.exe (8.31 MB)
• AdskAccessScheduledInstaller.exe (14.92 MB)
• AdskAccessService.exe (13.07 MB)
• AdskAccessServiceHost.exe (15.28 MB)
• AdskExecutorProxy.exe (14.47 MB)
• AdskInstallerUpdateCheck.exe (14.79 MB)
• AdskUninstallHelper.exe (8.10 MB)
• AdskUpdateCheck.exe (17.42 MB)
• DownloadManager.exe (17.36 MB)
• install_helper_tool.exe (15.03 MB)
• install_manager.exe (28.06 MB)
• LogAnalyzer.exe (9.55 MB)
• odis_uninstaller.exe (7.27 MB)
• ProcessManager.exe (11.07 MB)
• PurgeSideBySideInstaller.exe (13.93 MB)
• senddmp.exe (2.49 MB)
• upi.exe (408.78 KB)
• cer_dialog.exe (9.79 MB)
• cer_rawdataviewer.exe (3.82 MB)
• cer_service.exe (33.04 MB)
• AdskAccessUIHost.exe (181.09 MB)
• acad.exe (5.60 MB)
• accoreconsole.exe (492.28 KB)
• AcPerfMonAgent.exe (145.27 KB)
• AcSignApply.exe (519.27 KB)
• AcTranslators.exe (710.27 KB)
• acxrefdumper.exe (270.27 KB)
• adcadmn.exe (2.43 MB)
• addplwiz.exe (565.28 KB)
• AdMigrator.exe (151.78 KB)
• AdPreviewGenerator.exe (546.34 KB)
• AdRefMan.exe (872.27 KB)
• AdSubAware.exe (101.78 KB)
• AutoLispDebugAdapter.exe (347.28 KB)
• CPCompare.exe (145.28 KB)
• Dwg2Spd.exe (658.77 KB)
• DwgCheckStandards.exe (430.27 KB)
• pc3exe.exe (470.78 KB)
• QtWebEngineProcess.exe (660.15 KB)
• slidelib.exe (313.78 KB)
• styexe.exe (469.77 KB)
• styshwiz.exe (544.27 KB)
• BFMigrator.exe (31.77 KB)
• AcBlockIndexPipeline.exe (145.27 KB)
• BlockEncoder.exe (3.92 MB)
• SuggestionEngine.exe (9.28 MB)
• senddmp.exe (2.50 MB)
• upi.exe (412.28 KB)
• Das.Local.exe (148.28 KB)
• alias.exe (147.27 KB)
• dumpshx.exe (98.78 KB)
• lspsurf.exe (410.78 KB)
• AcEventSync.exe (65.14 MB)
• AcQMod.exe (64.59 MB)
• BatchPrint.exe (412.28 KB)
• BatchPrint.exe (410.27 KB)
• AdPreviewGenerator.exe (544.85 KB)
• AppManager.exe (238.01 KB)
• FileTools2GUI.exe (36.78 KB)
• FileToolsGUI.exe (133.28 KB)
• FiletoolsTaskRunner.exe (30.27 KB)
• OptionsEditor.exe (198.78 KB)
• Roamer.exe (209.28 KB)
• senddmp.exe (2.50 MB)
• upi.exe (410.28 KB)
• SceneConvertServer.exe (91.27 KB)
• AdPreviewGenerator.exe (544.84 KB)
• ATFRevitBroker.exe (150.27 KB)
• ATFRevitRCEHost.exe (150.27 KB)
• EXTRACT.EXE (99.00 KB)
• Revit.exe (1.57 MB)
• RevitBrowserSubprocess.exe (327.27 KB)
• RevitWorker.exe (1.25 MB)
• Switch Autodesk Environment.exe (163.27 KB)
• DynamoAddInGenerator.exe (148.27 KB)
• DynamoCLI.exe (148.28 KB)
• DynamoWPFCLI.exe (148.28 KB)
• ProtoTestConsoleRunner.exe (148.28 KB)
• DynamoFeatureFlags.exe (148.28 KB)
• Md2Html.exe (1.97 MB)
• MdbConverter.exe (148.28 KB)
• RevitAddInsManager.exe (290.27 KB)
• senddmp.exe (2.37 MB)
• upi.exe (351.78 KB)
• RevitExtractor.exe (152.28 KB)
• RevitExtractor_Client.exe (150.28 KB)
• RevitBrowserSubprocess.exe (327.28 KB)
• Sentiment.exe (325.77 KB)
• ATFRevitBroker.exe (146.27 KB)
• ATFRevitRCEHost.exe (146.28 KB)
• Revit.exe (1.57 MB)
• RevitWorker.exe (1.25 MB)
• Switch Autodesk Environment.exe (159.27 KB)
• DynamoAddInGenerator.exe (148.67 KB)
• DynamoCLI.exe (148.28 KB)
• DynamoWPFCLI.exe (148.28 KB)
• ProtoTestConsoleRunner.exe (148.28 KB)
• DynamoFeatureFlags.exe (148.27 KB)
• Md2Html.exe (1.97 MB)
• MdbConverter.exe (148.28 KB)
• RevitAddInsManager.exe (286.27 KB)
• senddmp.exe (2.50 MB)
• upi.exe (412.27 KB)
• RevitExtractor.exe (152.27 KB)
• RevitExtractor_Client.exe (150.27 KB)
• Sentiment.exe (321.78 KB)
• ABufferClean.exe (153.51 KB)
• ACalcRMngr.exe (322.51 KB)
• autotest.exe (285.01 KB)
• btest.exe (309.01 KB)
• calcr.exe (170.52 KB)
• catpro.exe (1.51 MB)
• koo.EXE (645.52 KB)
• mg-tetra.exe (3.81 MB)

...click to view all...

The information on this page is only about version 39.0.0.868 of Integration Extension for Revit and Robot Structural Analysis 2026. If you are manually uninstalling Integration Extension for Revit and Robot Structural Analysis 2026 we recommend you to check if the following data is left behind on your PC.

Folders found on disk after you uninstall Integration Extension for Revit and Robot Structural Analysis 2026 from your computer:

• C:\Program Files\Autodesk

The files below are left behind on your disk when you remove Integration Extension for Revit and Robot Structural Analysis 2026:

• C:\Program Files\Autodesk\AdODIS\V1\Access\AdskAccessCore.exe
• C:\Program Files\Autodesk\AdODIS\V1\Access\log4cplusU.dll
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\addons\adIPC.node
• C:\Program Files\Autodesk\AdODIS\V1\Access\ui-plugins\ada\app.asar
• C:\Program Files\Autodesk\AdODIS\V1\Access\UPI2.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdAssetManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdAutoUpdateSDK.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdCacheDBReader.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdClientStateManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdHttpLib.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdManifestDownloader.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\adp_wrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdpSDKWrapper.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdskAccessService.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdskIdentitySDK.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\AdUPIHarvester.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\CER\cer.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\condition_evaluator.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\IDManager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\Lmdb.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\manifest_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\property_manager.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\AdskAccessUIHost.exe
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\d3dcompiler_47.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\ffmpeg.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\icudtl.dat
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\libEGL.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\libGLESv2.dll
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\resources\app.asar
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\v8_context_snapshot.bin
• C:\Program Files\Autodesk\AdODIS\V1\Setup\ui-launcher\vk_swiftshader.dll
• C:\Program Files\Autodesk\Genuine Service\AdlmPITInfo.dll
• C:\Program Files\Autodesk\Genuine Service\AdskIdentitySDK.dll
• C:\Program Files\Autodesk\Genuine Service\cer.dll
• C:\Program Files\Autodesk\Genuine Service\concrt140.dll
• C:\Program Files\Autodesk\Genuine Service\cpprest_2_10.dll
• C:\Program Files\Autodesk\Genuine Service\GenuineService.exe
• C:\Program Files\Autodesk\Genuine Service\msvcp140.dll
• C:\Program Files\Autodesk\Genuine Service\UPI2.dll
• C:\Program Files\Autodesk\Genuine Service\vcruntime140.dll
• C:\Program Files\Autodesk\Genuine Service\vcruntime140_1.dll
• C:\Program Files\Autodesk\Revit 2025\Samples\??????.rvt
• C:\Program Files\Autodesk\Revit 2026\Samples\??????.rvt

Registry that is not uninstalled:

• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{301030A9-76CF-3551-A9AB-4E981DBEA05F}

A way to delete Integration Extension for Revit and Robot Structural Analysis 2026 with Advanced Uninstaller PRO

Integration Extension for Revit and Robot Structural Analysis 2026 is an application marketed by Autodesk, Inc.. Frequently, users choose to remove it. This can be hard because uninstalling this by hand takes some advanced knowledge related to removing Windows programs manually. The best SIMPLE procedure to remove Integration Extension for Revit and Robot Structural Analysis 2026 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your PC, add it. This is a good step because Advanced Uninstaller PRO is a very useful uninstaller and general tool to clean your computer.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. It's recommended to take your time to get familiar with Advanced Uninstaller PRO's interface and number of features available. Advanced Uninstaller PRO is a powerful Windows optimizer.

3. Press the General Tools button


4. Activate the Uninstall Programs button


5. All the programs existing on your PC will be shown to you

6. Scroll the list of programs until you find Integration Extension for Revit and Robot Structural Analysis 2026 or simply activate the Search field and type in "Integration Extension for Revit and Robot Structural Analysis 2026". The Integration Extension for Revit and Robot Structural Analysis 2026 app will be found very quickly. Notice that after you select Integration Extension for Revit and Robot Structural Analysis 2026 in the list of applications, some data about the program is made available to you:

• Safety rating (in the lower left corner). The star rating tells you the opinion other users have about Integration Extension for Revit and Robot Structural Analysis 2026, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Technical information about the program you wish to remove, by pressing the Properties button.

7. Press the Uninstall button. A confirmation dialog will show up. Confirm the uninstall by clicking the Uninstall button. Advanced Uninstaller PRO will uninstall Integration Extension for Revit and Robot Structural Analysis 2026.


8. After removing Integration Extension for Revit and Robot Structural Analysis 2026, Advanced Uninstaller PRO will offer to run an additional cleanup. Click Next to proceed with the cleanup. All the items of Integration Extension for Revit and Robot Structural Analysis 2026 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling Integration Extension for Revit and Robot Structural Analysis 2026 using Advanced Uninstaller PRO, you are assured that no Windows registry entries, files or folders are left behind on your disk.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

This page is not a piece of advice to uninstall Integration Extension for Revit and Robot Structural Analysis 2026 by Autodesk, Inc. from your computer, nor are we saying that Integration Extension for Revit and Robot Structural Analysis 2026 by Autodesk, Inc. is not a good application. This text simply contains detailed info on how to uninstall Integration Extension for Revit and Robot Structural Analysis 2026 supposing you want to. The information above contains registry and disk entries that Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.