FreeCAD 0.19.3

A way to uninstall FreeCAD 0.19.3 from your PC

This page is about FreeCAD 0.19.3 for Windows. Here you can find details on how to uninstall it from your computer. The Windows release was developed by FreeCAD Team. Open here where you can read more on FreeCAD Team. More information about FreeCAD 0.19.3 can be found at https://www.freecadweb.org/. Usually the FreeCAD 0.19.3 application is found in the C:\Program Files\FreeCAD 0.19 folder, depending on the user's option during setup. The full command line for removing FreeCAD 0.19.3 is C:\Program Files\FreeCAD 0.19\Uninstall-FreeCAD.exe. Note that if you will type this command in Start / Run Note you might receive a notification for administrator rights. The application's main executable file has a size of 201.49 KB (206322 bytes) on disk and is named Uninstall-FreeCAD.exe.

The executable files below are part of FreeCAD 0.19.3. They take an average of 201.49 KB (206322 bytes) on disk.

• Uninstall-FreeCAD.exe (201.49 KB)

This data is about FreeCAD 0.19.3 version 0.19.3 alone. If you're planning to uninstall FreeCAD 0.19.3 you should check if the following data is left behind on your PC.

Directories left on disk:

• C:\Program Files\FreeCAD 0.19
• C:\Program Files\FreeCAD 0.20
• C:\Users\%user%\AppData\Local\FreeCAD
• C:\Users\%user%\AppData\Local\Temp\FreeCAD

The files below remain on your disk when you remove FreeCAD 0.19.3:

• C:\Program Files\FreeCAD 0.19\bin\assistant.exe
• C:\Program Files\FreeCAD 0.19\bin\balsam.exe
• C:\Program Files\FreeCAD 0.19\bin\boost_atomic-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_atomic-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_chrono-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_chrono-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_container-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_container-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_context-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_context-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_contract-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_contract-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_coroutine-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_coroutine-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_date_time-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_date_time-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_fiber-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_fiber-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_filesystem-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_filesystem-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_graph-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_graph-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_iostreams-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_iostreams-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_locale-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_locale-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_log_setup-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_log_setup-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_log-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_log-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99f-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99f-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99l-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99l-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_c99-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1f-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1f-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1l-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1l-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_math_tr1-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_prg_exec_monitor-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_prg_exec_monitor-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_program_options-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_program_options-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_python38-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_python38-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_random-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_random-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_regex-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_regex-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_serialization-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_serialization-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_signals-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_signals-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_noop-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_noop-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_windbg_cached-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_windbg_cached-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_windbg-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_stacktrace_windbg-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_system-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_system-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_thread-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_thread-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_timer-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_timer-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_type_erasure-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_type_erasure-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_unit_test_framework-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_unit_test_framework-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_wave-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_wave-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_wserialization-vc141-mt-gd-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\boost_wserialization-vc141-mt-x64-1_67.dll
• C:\Program Files\FreeCAD 0.19\bin\c_rehash.pl
• C:\Program Files\FreeCAD 0.19\bin\canbusutil.exe
• C:\Program Files\FreeCAD 0.19\bin\ccx.exe
• C:\Program Files\FreeCAD 0.19\bin\Coin4.dll
• C:\Program Files\FreeCAD 0.19\bin\concrt140.dll
• C:\Program Files\FreeCAD 0.19\bin\CreateDOMDocument.exe
• C:\Program Files\FreeCAD 0.19\bin\curl.exe
• C:\Program Files\FreeCAD 0.19\bin\d3dcompiler_47.dll
• C:\Program Files\FreeCAD 0.19\bin\designer.exe
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_asyncio.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_bz2.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_ctypes.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_ctypes_test.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_decimal.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_elementtree.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_hashlib.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_lzma.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_msi.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_multiprocessing.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_overlapped.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_queue.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_socket.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_sqlite3.pyd
• C:\Program Files\FreeCAD 0.19\bin\DLLs\_ssl.pyd

Usually the following registry data will not be cleaned:

• HKEY_CLASSES_ROOT\FreeCAD.Document
• HKEY_CURRENT_USER\Software\FreeCAD
• HKEY_LOCAL_MACHINE\Software\FreeCAD0193
• HKEY_LOCAL_MACHINE\Software\FreeCAD0201
• HKEY_LOCAL_MACHINE\Software\Microsoft\RADAR\HeapLeakDetection\DiagnosedApplications\FreeCAD.exe
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\FreeCAD0193
• HKEY_LOCAL_MACHINE\Software\Wow6432Node\Microsoft\Windows\CurrentVersion\App Paths\FreeCAD.exe

Additional registry values that are not cleaned:

• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\FreeCAD 0.19\bin\FreeCAD.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\FreeCAD 0.19\bin\FreeCAD.exe.FriendlyAppName
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\FreeCAD 0.20\bin\FreeCAD.exe.ApplicationCompany
• HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Program Files\FreeCAD 0.20\bin\FreeCAD.exe.FriendlyAppName
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2527065950-1052452830-3823662855-1001\\Device\HarddiskVolume6\Program Files\FreeCAD 0.19\bin\FreeCAD.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2527065950-1052452830-3823662855-1001\\Device\HarddiskVolume6\Program Files\FreeCAD 0.20\bin\FreeCAD.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\bam\State\UserSettings\S-1-5-21-2527065950-1052452830-3823662855-1001\\Device\HarddiskVolume6\Users\UserName\Downloads\FreeCAD-0.20.1-WIN-x64-installer-1.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\TCP Query User{AB455192-A039-40EB-9A56-105BFEAF1EEF}C:\program files\freecad 0.20\bin\freecad.exe
• HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\SharedAccess\Parameters\FirewallPolicy\FirewallRules\UDP Query User{F1C0E2F9-FCDA-4D57-8415-7EB080B8D959}C:\program files\freecad 0.20\bin\freecad.exe

How to uninstall FreeCAD 0.19.3 from your computer with the help of Advanced Uninstaller PRO

FreeCAD 0.19.3 is a program released by FreeCAD Team. Some users try to remove this application. Sometimes this is easier said than done because deleting this manually requires some knowledge regarding Windows program uninstallation. The best SIMPLE procedure to remove FreeCAD 0.19.3 is to use Advanced Uninstaller PRO. Here is how to do this:





1. If you don't have Advanced Uninstaller PRO already installed on your Windows PC, install it. This is good because Advanced Uninstaller PRO is a very useful uninstaller and general tool to maximize the performance of your Windows system.

DOWNLOAD NOW

• go to Download Link
• download the program by pressing the DOWNLOAD button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take your time to admire Advanced Uninstaller PRO's design and number of features available. Advanced Uninstaller PRO is a very good system utility.

3. Press the General Tools button


4. Activate the Uninstall Programs button


5. A list of the applications installed on the computer will be shown to you

6. Navigate the list of applications until you find FreeCAD 0.19.3 or simply activate the Search feature and type in "FreeCAD 0.19.3". If it exists on your system the FreeCAD 0.19.3 app will be found very quickly. Notice that after you click FreeCAD 0.19.3 in the list of applications, some data about the application is made available to you:

• Safety rating (in the lower left corner). The star rating explains the opinion other users have about FreeCAD 0.19.3, from "Highly recommended" to "Very dangerous".
• Reviews by other users - Press the Read reviews button.
• Details about the program you wish to uninstall, by pressing the Properties button.

For instance you can see that for FreeCAD 0.19.3:

• The software company is: https://www.freecadweb.org/
• The uninstall string is: C:\Program Files\FreeCAD 0.19\Uninstall-FreeCAD.exe

7. Click the Uninstall button. A window asking you to confirm will come up. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will automatically remove FreeCAD 0.19.3.


8. After removing FreeCAD 0.19.3, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of FreeCAD 0.19.3 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling FreeCAD 0.19.3 with Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your PC.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a recommendation to uninstall FreeCAD 0.19.3 by FreeCAD Team from your PC, nor are we saying that FreeCAD 0.19.3 by FreeCAD Team is not a good application for your PC. This page only contains detailed info on how to uninstall FreeCAD 0.19.3 in case you decide this is what you want to do. The information above contains registry and disk entries that our application Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' PCs.