Publishers

Fikus Visualcam 18 Fikus Visualcam 18





A way to uninstall Fikus Visualcam 18 from your computer

You can find below details on how to uninstall Fikus Visualcam 18 for Windows. It is produced by Metalcam. Go over here where you can find out more on Metalcam. You can get more details related to Fikus Visualcam 18 at . The application is frequently placed in the C:\Metalcam\Fikus Visualcam 18 folder. Take into account that this location can differ being determined by the user's preference. The full command line for removing Fikus Visualcam 18 is C:\Program Files (x86)\InstallShield Installation Information\{325E1829-BD7B-48EC-B431-9B159C15F038}\setup.exe -runfromtemp -l0x000a -removeonly. Keep in mind that if you will type this command in Start / Run Note you might get a notification for administrator rights. setup.exe is the Fikus Visualcam 18's main executable file and it takes circa 444.92 KB (455600 bytes) on disk.

Fikus Visualcam 18 is composed of the following executables which take 444.92 KB (455600 bytes) on disk:

  • setup.exe (444.92 KB)


The current page applies to Fikus Visualcam 18 version 18.1.1840.1 only. You can find below info on other releases of Fikus Visualcam 18:

...click to view all...
After the uninstall process, the application leaves some files behind on the PC. Part_A few of these are listed below.

Folders remaining:
  • C:\Metalcam\Fikus Visualcam 18

The files below were left behind on your disk by Fikus Visualcam 18 when you uninstall it:
  • C:\Metalcam\Fikus Visualcam 18\bin\_RegisterDXF_RunAsAdmin.bat
  • C:\Metalcam\Fikus Visualcam 18\bin\ActCFG.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\ActiveConverter.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\ActualizaHer.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\ACVMidMax.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\AdvancedCountourExtraction.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\atl100.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\borlndmm.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\BrepOperations.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\c2f.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\CADFunc.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Calculator.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\CAMTree.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\CAMTreeDesc.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\cc32110mt.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\cc3260.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\cc3260mt.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\cfgCleaner.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\cfgedit.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\ClassFactory.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\CtTable.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\cxDataRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\cxEditorsRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\cxLibraryRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\cxPageControldxBarPopupMenuRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\cxPageControlRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dataWire.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\DBAcotacion.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\DBConfiguracio.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\dbghelp.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\dbrtl150.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dbrtl60.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\DBSincronizacion.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\DelZip190.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\designide150.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\designide60.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\DrillWizard.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\droptgt.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxBarRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxComnRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxCoreRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxf.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\dxf_CadLib.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\DXFFileImport.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\dxForumLibC6.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxGDIPlusRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxLayoutControlRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxOfficeCoreRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\dxThemeRS15.bpl
  • C:\Metalcam\Fikus Visualcam 18\bin\EditorEinaTorn.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Eines.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\ElmVBuff.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Escena.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\ExportarISO.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\F3DMeca1.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\f3x32.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\ficedw.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\fikus00.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FIKUS1.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fikus2.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fikus3DCProxy.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusBackUp.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusCam.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusCamInterface.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusCamLathe.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusCamMill.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FikusUpdate.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\fikusw.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\FKMail.exe
  • C:\Metalcam\Fikus Visualcam 18\bin\freetype-6.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DDec.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DGeo.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DProc.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DSolido.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DWTal.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa2DWTal2.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\Fresa4X5X.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FresaDB1.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FresaDB2.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FSimulator.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fw00s.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FW01.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwapi1.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwapi2.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWBackImage.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwcad.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwcaddb.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwcadx.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwcapas.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWCFGOpt.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWCon.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwdefeje.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\fwdim.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWExePostpro.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWGantt.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWGanttBmp.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWGanttCitizenC16.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWGanttHardinge.dll
  • C:\Metalcam\Fikus Visualcam 18\bin\FWGanttTornos13a.dll

You will find in the Windows Registry that the following data will not be uninstalled; remove them one by one using regedit.exe:
  • HKEY_LOCAL_MACHINE\Software\Metalcam\Fikus Visualcam
  • HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\{325E1829-BD7B-48EC-B431-9B159C15F038}

Additional values that you should delete:
  • HKEY_CLASSES_ROOT\Local Settings\Software\Microsoft\Windows\Shell\MuiCache\C:\Metalcam\Fikus Visualcam 18\bin\fikusw.exe.FriendlyAppName


A way to remove Fikus Visualcam 18 from your computer with Advanced Uninstaller PRO

Fikus Visualcam 18 is an application offered by Metalcam. Some computer users want to uninstall it. This can be difficult because doing this by hand takes some skill regarding removing Windows applications by hand. One of the best QUICK practice to uninstall Fikus Visualcam 18 is to use Advanced Uninstaller PRO. Take the following steps on how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is an efficient uninstaller and all around tool to maximize the performance of your Windows computer.

DOWNLOAD NOW

  • go to Download Link
  • download the program by clicking on the green DOWNLOAD NOW button
  • install Advanced Uninstaller PRO
2. Run Advanced Uninstaller PRO. Take some time to get familiar with the program's design and wealth of tools available. Advanced Uninstaller PRO is a very good package of tools.

3. Click on the General Tools button
Go to General Tools


4. Click on the Uninstall Programs tool
Go to Uninstall Programs


5. A list of the programs existing on your computer will be shown to you

6. Scroll the list of programs until you find Fikus Visualcam 18 or simply activate the Search feature and type in "Fikus Visualcam 18". The Fikus Visualcam 18 program will be found automatically. After you select Fikus Visualcam 18 in the list of programs, some information regarding the application is made available to you:


  • Safety rating (in the left lower corner). This tells you the opinion other users have regarding Fikus Visualcam 18, ranging from "Highly recommended" to "Very dangerous".
  • Reviews by other users - Click on the Read reviews button.
  • Technical information regarding the program you want to remove, by clicking on the Properties button.
For instance you can see that for Fikus Visualcam 18:





  • The software company is: http://www.metalcam.com
  • The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{325E1829-BD7B-48EC-B431-9B159C15F038}\setup.exe -runfromtemp -l0x000a -removeonly
7. Press the Uninstall button. A confirmation dialog will come up. accept the removal by pressing the Uninstall button. Advanced Uninstaller PRO will then uninstall Fikus Visualcam 18.
Uninstall Fikus Visualcam 18


8. After uninstalling Fikus Visualcam 18, Advanced Uninstaller PRO will ask you to run an additional cleanup. Click Next to start the cleanup. All the items of Fikus Visualcam 18 which have been left behind will be detected and you will be asked if you want to delete them. By removing Fikus Visualcam 18 with Advanced Uninstaller PRO, you are assured that no registry items, files or folders are left behind on your computer.

Your PC will remain clean, speedy and able to take on new tasks.

DOWNLOAD NOW


Disclaimer

This page is not a recommendation to remove Fikus Visualcam 18 by Metalcam from your computer, we are not saying that Fikus Visualcam 18 by Metalcam is not a good application for your PC. This page simply contains detailed instructions on how to remove Fikus Visualcam 18 in case you decide this is what you want to do. Here you can find registry and disk entries that Advanced Uninstaller PRO stumbled upon and classified as "leftovers" on other users' PCs.

2019-03-10 / Written by Daniel Statescu for Advanced Uninstaller PRO

follow @DanielStatescu
Last update on: 2019-03-10 16:47:30.613