FLOW-3D Cast 4.2 Update 1

How to uninstall FLOW-3D Cast 4.2 Update 1 from your PC

This page is about FLOW-3D Cast 4.2 Update 1 for Windows. Here you can find details on how to uninstall it from your PC. It is written by Flow Science, Inc.. You can read more on Flow Science, Inc. or check for application updates here. You can read more about related to FLOW-3D Cast 4.2 Update 1 at http://www.flow3d.com. The program is frequently located in the C:\flow3d\v4.2 folder (same installation drive as Windows). The full command line for uninstalling FLOW-3D Cast 4.2 Update 1 is C:\Program Files (x86)\InstallShield Installation Information\{059B92C4-6471-41E4-85A6-43F991341701}\setup.exe. Note that if you will type this command in Start / Run Note you might receive a notification for admin rights. setup.exe is the FLOW-3D Cast 4.2 Update 1's primary executable file and it occupies close to 1.14 MB (1196536 bytes) on disk.

FLOW-3D Cast 4.2 Update 1 is composed of the following executables which take 1.14 MB (1196536 bytes) on disk:

• setup.exe (1.14 MB)

The information on this page is only about version 4.2.1.2 of FLOW-3D Cast 4.2 Update 1. A considerable amount of files, folders and Windows registry entries will not be uninstalled when you want to remove FLOW-3D Cast 4.2 Update 1 from your PC.

Folders left behind when you uninstall FLOW-3D Cast 4.2 Update 1:

• C:\flow3d\v4.2

Files remaining:

• C:\flow3d\v4.2\db\f3dServerUserName.sql
• C:\flow3d\v4.2\double\hydr3d\Release\hydr3d.exe
• C:\flow3d\v4.2\examples\continuous_casting_aluminum\bottom.stl
• C:\flow3d\v4.2\examples\continuous_casting_aluminum\melt.stl
• C:\flow3d\v4.2\examples\continuous_casting_aluminum\mold.stl
• C:\flow3d\v4.2\examples\continuous_casting_aluminum\prepin.inp
• C:\flow3d\v4.2\examples\continuous_casting_aluminum\solidified_fluid.semi-continuous-casting-emax1.FEmesh
• C:\flow3d\v4.2\examples\core_drying_flow\Core Drying Flow.docx
• C:\flow3d\v4.2\examples\core_drying_flow\core.stl
• C:\flow3d\v4.2\examples\core_drying_flow\inlet.stl
• C:\flow3d\v4.2\examples\core_drying_flow\outlet.stl
• C:\flow3d\v4.2\examples\core_drying_flow\prepin.inp
• C:\flow3d\v4.2\examples\filter_perm\Filter.docx
• C:\flow3d\v4.2\examples\filter_perm\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_box_filling\Filling.docx
• C:\flow3d\v4.2\examples\HPDC_box_filling\HPDC_Box.stl
• C:\flow3d\v4.2\examples\HPDC_box_filling\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_air\HPDC Solidification in Air.docx
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_air\HPDC_Box.stl
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_air\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_mold\HPDC Solidification in Mold.docx
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_mold\HPDC_Box.stl
• C:\flow3d\v4.2\examples\HPDC_box_solidification_in_mold\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c10_c10_Runner.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c14_c14_Overflows.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c22_c22_Core.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c26_c26_Core-Waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c30_c30_Cover waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c34_c34_Ejector waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\c6_c6_Spindle.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\HPDC Filling.docx
• C:\flow3d\v4.2\examples\HPDC_spindle_filling\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c10_c10_Runner.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c14_c14_Overflows.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c22_c22_Core.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c26_c26_Core-Waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c30_c30_Cover waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c34_c34_Ejector waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\c6_c6_Spindle.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\HPDC Solidification.docx
• C:\flow3d\v4.2\examples\HPDC_spindle_solidification\prepin.inp
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c10_c10_Runner.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c14_c14_Overflows.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c22_c22_Core.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c26_c26_Core-Waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c30_c30_Cover waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c34_c34_Ejector waterlines.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\c6_c6_Spindle.stl
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\HPDC Thermal Die Cycling.docx
• C:\flow3d\v4.2\examples\HPDC_spindle_thermal_die_cycling\prepin.inp
• C:\flow3d\v4.2\examples\lost_foam_filling\Lost Foam Filling.docx
• C:\flow3d\v4.2\examples\lost_foam_filling\prepin.inp
• C:\flow3d\v4.2\examples\sand_core_gas_flow\prepin.inp
• C:\flow3d\v4.2\examples\sand_core_gas_flow\Sand core gas flow.docx
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.ffmpeg.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.freetype.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.gif.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.hdf5.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.jpeg.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.png.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.qt.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.sm.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.tiff.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.verdict.txt
• C:\flow3d\v4.2\FlowSight\apex31\3rdparty\README.winzip.txt
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_arch
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_cdfapp
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_ceishell
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_crappfaker
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_crserver
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_designer
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_drtest
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_egltest
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_env
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_gl
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_lconvert
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_linguist
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_lrelease
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_lupdate
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_py
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_qassistant3
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_qassistant4
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_qcollectiongenerator4
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_qt3
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_qt4
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_setup
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_udrw2vrml
• C:\flow3d\v4.2\FlowSight\apex31\bin\cei_apex31_udrw2x3d
• C:\flow3d\v4.2\FlowSight\apex31\bin\ceilaunch31
• C:\flow3d\v4.2\FlowSight\apex31\bin\ceishell31
• C:\flow3d\v4.2\FlowSight\apex31\bin\ceistart101
• C:\flow3d\v4.2\FlowSight\apex31\bin\cpython31
• C:\flow3d\v4.2\FlowSight\apex31\bin\run_ceishell_on_a_remote_host_be.py
• C:\flow3d\v4.2\FlowSight\apex31\bin\run_ceishell_on_a_remote_host_fe.py
• C:\flow3d\v4.2\FlowSight\apex31\bin\run_ceishell_remote_renderer_be.py
• C:\flow3d\v4.2\FlowSight\apex31\bin\run_ceishell_remote_renderer_fe.py
• C:\flow3d\v4.2\FlowSight\apex31\cei_cache_database.dat
• C:\flow3d\v4.2\FlowSight\apex31\fonts\arial.ttf
• C:\flow3d\v4.2\FlowSight\apex31\fonts\arialbd.ttf
• C:\flow3d\v4.2\FlowSight\apex31\fonts\arialbi.ttf

You will find in the Windows Registry that the following keys will not be removed; remove them one by one using regedit.exe:

• HKEY_CURRENT_USER\Software\Flow Science\FLOW-3D Cast\C:|flow3d|v4.2|
• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\4C29B95017464E14586A349F19437110
• HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Uninstall\InstallShield_{059B92C4-6471-41E4-85A6-43F991341701}

Additional values that are not removed:

• HKEY_LOCAL_MACHINE\SOFTWARE\Classes\Installer\Products\4C29B95017464E14586A349F19437110\ProductName

A way to uninstall FLOW-3D Cast 4.2 Update 1 using Advanced Uninstaller PRO

FLOW-3D Cast 4.2 Update 1 is an application marketed by Flow Science, Inc.. Frequently, computer users decide to remove this application. Sometimes this is easier said than done because deleting this by hand takes some advanced knowledge regarding removing Windows applications by hand. The best SIMPLE solution to remove FLOW-3D Cast 4.2 Update 1 is to use Advanced Uninstaller PRO. Here are some detailed instructions about how to do this:





1. If you don't have Advanced Uninstaller PRO on your Windows PC, add it. This is a good step because Advanced Uninstaller PRO is a very efficient uninstaller and all around tool to take care of your Windows system.

DOWNLOAD NOW

• visit Download Link
• download the setup by pressing the green DOWNLOAD NOW button
• install Advanced Uninstaller PRO

2. Run Advanced Uninstaller PRO. Take some time to get familiar with the program's interface and number of features available. Advanced Uninstaller PRO is a very useful Windows optimizer.

3. Press the General Tools category


4. Press the Uninstall Programs button


5. All the programs existing on your PC will be shown to you

6. Scroll the list of programs until you find FLOW-3D Cast 4.2 Update 1 or simply click the Search field and type in "FLOW-3D Cast 4.2 Update 1". If it is installed on your PC the FLOW-3D Cast 4.2 Update 1 app will be found very quickly. Notice that when you click FLOW-3D Cast 4.2 Update 1 in the list , the following information about the application is made available to you:

• Star rating (in the lower left corner). This tells you the opinion other people have about FLOW-3D Cast 4.2 Update 1, from "Highly recommended" to "Very dangerous".
• Reviews by other people - Press the Read reviews button.
• Technical information about the application you want to remove, by pressing the Properties button.

For example you can see that for FLOW-3D Cast 4.2 Update 1:

• The web site of the program is: http://www.flow3d.com
• The uninstall string is: C:\Program Files (x86)\InstallShield Installation Information\{059B92C4-6471-41E4-85A6-43F991341701}\setup.exe

7. Press the Uninstall button. A window asking you to confirm will appear. accept the uninstall by pressing Uninstall. Advanced Uninstaller PRO will then remove FLOW-3D Cast 4.2 Update 1.


8. After uninstalling FLOW-3D Cast 4.2 Update 1, Advanced Uninstaller PRO will ask you to run an additional cleanup. Press Next to go ahead with the cleanup. All the items that belong FLOW-3D Cast 4.2 Update 1 that have been left behind will be detected and you will be asked if you want to delete them. By uninstalling FLOW-3D Cast 4.2 Update 1 using Advanced Uninstaller PRO, you can be sure that no Windows registry items, files or folders are left behind on your PC.

Your Windows PC will remain clean, speedy and ready to serve you properly.

Disclaimer

The text above is not a recommendation to remove FLOW-3D Cast 4.2 Update 1 by Flow Science, Inc. from your PC, nor are we saying that FLOW-3D Cast 4.2 Update 1 by Flow Science, Inc. is not a good software application. This text simply contains detailed info on how to remove FLOW-3D Cast 4.2 Update 1 in case you want to. Here you can find registry and disk entries that other software left behind and Advanced Uninstaller PRO discovered and classified as "leftovers" on other users' computers.